|
Std ID |
Description (Standard Title) |
Detail |
|
GB/T 46222-2025
|
Test method for mixed mode I-III interlaminar fracture toughness of fiber-reinforced plastic composites
|
GB/T 46222-2025
|
|
GB/T 41762.1-2025
|
Fibre-reinforced plastic composites - Determination of laminate through-thickness properties - Part 1: Direct tension and compression tests
|
GB/T 41762.1-2025
|
|
GB/T 46217-2025
|
Test method of ionizing radiation effect for polymer-based piezoelectric composites
|
GB/T 46217-2025
|
|
GB/T 14207-2024
|
Test method for water absorption of sandwich constructions or cores
|
GB/T 14207-2024
|
|
GB/T 1464-2024
|
Test method for density of sandwich construction or cores
|
GB/T 1464-2024
|
|
GB/T 43938.1-2024
|
Test method for mechanical properties of thin-walled tube of carbon fiber reinforced composite - Part 1: Tensile testing
|
GB/T 43938.1-2024
|
|
GB/T 43938.2-2024
|
Test method for mechanical properties of thin-walled tube of carbon fiber reinforced composite - Part 2: Compressive testing
|
GB/T 43938.2-2024
|
|
GB/T 15568-2024
|
Sheet molding compound(SMC) for general purposes
|
GB/T 15568-2024
|
|
GB/T 45006-2024
|
Pultruded fiber reinforced polymer composite planks for wind turbine blades
|
GB/T 45006-2024
|
|
GB/T 45011-2024
|
Test method for impact failure of fiber reinforced polymer matrix composites
|
GB/T 45011-2024
|
|
GB/T 45014-2024
|
Test method for pull-through resistance of fasteners of polymer matrix composite laminates
|
GB/T 45014-2024
|
|
GB/T 26747-2023
|
Fiber reinforced plastic composites tanks for water treatment units
|
GB/T 26747-2023
|
|
GB/T 42542-2023
|
Fibre-reinforced composites - Method for accelerated moisture absorption and supersaturated conditioning by moisture using sealed pressure vessel
|
GB/T 42542-2023
|
|
GB/T 1458-2023
|
Test method for mechanical properties of ring of filament-winding reinforced composites
|
GB/T 1458-2023
|
|
GB/T 42911-2023
|
Carbon fibre reinforced composites - Method for accelerated moisture absorption and supersaturated conditioning by moisture using sealed pressure vessel
|
GB/T 42911-2023
|
|
GB/T 42923-2023
|
Glass-fibre-reinforced plastic products - Determination of fibre length
|
GB/T 42923-2023
|
|
GB/T 43113-2023
|
Standard practices for evaluating the hydrothermal resistance of carbon fiber reinforced polymer composites
|
GB/T 43113-2023
|
|
GB/T 43116-2023
|
Fibre-reinforced plastic composites - Standard qualification plan(SQP)for composite materials, including reduced qualification plan(RQP)and extended qualification plan(EQP)schemes
|
GB/T 43116-2023
|
|
GB/T 43117-2023
|
Glass-reinforced thermosetting plastics(GRP)pipes - Determination of the ring creep properties under wet or dry conditions
|
GB/T 43117-2023
|
|
GB/T 1455-2022
|
Test method for shear properties of sandwich constructions or cores
|
GB/T 1455-2022
|
|
GB/T 1453-2022
|
Test method for flatwise compression properties of sandwich constructions or cores
|
GB/T 1453-2022
|
|
GB/T 1457-2022
|
Test method for climbing drum peel strength of sandwich constructions
|
GB/T 1457-2022
|
|
GB/T 41491-2022
|
Composite pole in distribution network
|
GB/T 41491-2022
|
|
GB/T 41498-2022
|
Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
|
GB/T 41498-2022
|
|
GB/T 41501-2022
|
Fibre-reinforced plastic composites - Determination of interlaminar strength and modulus by double beam shear test
|
GB/T 41501-2022
|
|
GB/T 21239-2022
|
Test method for compression after impact properties of fiber reinforced plastic laminates
|
GB/T 21239-2022
|
|
GB/T 41762.2-2022
|
Fibre-reinforced plastic composites - Determination of laminate through-thickness properties - Part 2: Determination of the elastic modulus, the strength and the Weibull size effects by flexural test of unidirectional laminate, for carbon-fibre based syst
|
GB/T 41762.2-2022
|
|
GB/T 41767-2022
|
Test method for moisture absorption properties and equilibrium conditioning of polymer matrix composite materials
|
GB/T 41767-2022
|
|
GB/T 41955-2022
|
Test method for compression of fiber reinforced polymer matrix composite multi-directional laminates without open-hole
|
GB/T 41955-2022
|
|
GB/T 1454-2021
|
Test method for edgewise compressive properties of sandwich constructions
|
GB/T 1454-2021
|
|
GB/T 2567-2021
|
Test methods for properties of resin casting body
|
GB/T 2567-2021
|
|
GB/T 26745-2021
|
Basalt fiber composites for civil engineering structures
|
GB/T 26745-2021
|
|
GB/T 40340-2021
|
Composites and metal assemblies - Galvanic corrosion tests of carbon fibre reinforced plastics (CFRPs) related bonded or fastened structures in artificial atmospheres - Salt spray tests
|
GB/T 40340-2021
|
|
GB/T 40388-2021
|
Test method for shear strength of C/C composites
|
GB/T 40388-2021
|
|
GB/T 40396-2021
|
Test method for glass transition temperature of polymer matrix composites - Dynamic mechanical analysis(DMA)
|
GB/T 40396-2021
|
|
GB/T 13095-2021
|
Bathroom unit
|
GB/T 13095-2021
|
|
GB/T 1456-2021
|
Test method for flexural properties of sandwich constructions
|
GB/T 1456-2021
|
|
GB/T 41061-2021
|
Test methods for creep properties of fiber reinforced plastics
|
GB/T 41061-2021
|
|
GB/T 26752-2020
|
PAN-based carbon fiber
|
GB/T 26752-2020
|
|
GB/T 38515-2020
|
The method for high temperature mechanical properties of quartz fabric-reinforced resin matrix composite materials
|
GB/T 38515-2020
|
|
GB/T 38534-2020
|
Test method for tensile properties of oriented fibre reinforced polymer matrix composite materials at ultra-low temperature
|
GB/T 38534-2020
|
|
GB/T 38535-2020
|
Test method on fiber reinforced resin matrix composites by industrial computed tomography (CT)
|
GB/T 38535-2020
|
|
GB/T 38537-2020
|
Ultrasonic testing method for fiber reinforced resin matrix composites - C-scan method
|
GB/T 38537-2020
|
|
GB/T 38537-2020
|
Ultrasonic testing method for fiber reinforced resin matrix composites - C-scan method
|
GB/T 38537-2020
|
|
GB/T 35465.5-2020
|
Test method for fatigue properties of polymer matrix composite materials - Part 5: Flexural fatigue
|
GB/T 35465.5-2020
|
|
GB/T 35465.6-2020
|
Test method for fatigue properties of polymer matrix composite materials - Part 6: Fatigue properties of adhesives in shear by tension
|
GB/T 35465.6-2020
|
|
GB/T 39491-2020
|
General technical requirements of carbon fiber composites covering parts for automobiles
|
GB/T 39491-2020
|
|
GB/T 39549-2020
|
Fiber reinforced thermosetting composites septic tank
|
GB/T 39549-2020
|
|
GB/T 39682-2020
|
Fine ceramics. Determination of elastic modules at high temperature or ultra-high temperature. Split ring relative method
|
GB/T 39682-2020
|
|
GB/T 35465.4-2020
|
(Test method for fatigue performance of polymer matrix composites - Part 4: Tension-compression and compression-compression fatigue)
|
GB/T 35465.4-2020
|
|
GB/T 39484-2020
|
(Fiber-reinforced plastic composite materials The calibrated end load split test (C-ELS) and the effective crack length method are used to determine the type II fracture toughness of unidirectional reinforced materials)
|
GB/T 39484-2020
|
|
GB/T 39490-2020
|
(Test method for liquid impact resistance of fiber reinforced plastics-rotating device method)
|
GB/T 39490-2020
|
|
GB/T 21492-2019
|
Glass fiber reinforced plastics jacking pipes
|
GB/T 21492-2019
|
|
GB/T 37897-2019
|
Fibre-reinforced plastic composites - Determination of the in-plane shear modulus by the plate twist method
|
GB/T 37897-2019
|
|
GB/T 7190.3-2019
|
Mechanical draft cooling towers -- Part 3: Closed circuit cooling towers
|
GB/T 7190.3-2019
|
|
GB/T 1452-2018
|
Test method for flatwise tension strength of sandwich constructions
|
GB/T 1452-2018
|
|
GB/T 36262-2018
|
Fiber reinforced polymer composite grids for civil engineering
|
GB/T 36262-2018
|
|
GB/T 36264-2018
|
Test Method for Tensile Strength of Fiber Composites under Ultrahigh Temperature and Oxidizing Environment
|
GB/T 36264-2018
|
|
GB/T 36532-2018
|
Fibre-reinforced plastics -- Thermosetting moulding compounds and prepregs -- Determination of cure characteristics
|
GB/T 36532-2018
|
|
GB/T 7190.1-2018
|
Mechanical draft cooling towers -- Part 1: Medium and small open cooling towers
|
GB/T 7190.1-2018
|
|
GB/T 7190.2-2018
|
Mechanical draft cooling towers -- Part 2: Large open cooling towers
|
GB/T 7190.2-2018
|
|
GB/T 33501-2017
|
Test method for tensile property of C/C composites
|
GB/T 33501-2017
|
|
GB/T 3857-2017
|
Test method for chemical resistance of glass fiber reinforced thermosetting plastics
|
GB/T 3857-2017
|
|
GB/T 33896-2017
|
Test method for cyclic pressure of membrane housing
|
GB/T 33896-2017
|
|
GB/T 34182-2017
|
Composite cable bracket
|
GB/T 34182-2017
|
|
GB/T 3854-2017
|
Test method for hardness of reinforced plastics by means of a Barcol impresser
|
GB/T 3854-2017
|
|
GB/T 3362-2017
|
[Including 2020XG1] Test methods for tensile properties of carbon fiber multifilament
|
GB/T 3362-2017
|
|
GB/T 34551-2017
|
Test method for alkali resistance of glass fiber reinforced polymer bars in high temperature condition
|
GB/T 34551-2017
|
|
GB/T 34559-2017
|
Test method for compressive property of C/C composites
|
GB/T 34559-2017
|
|
GB/T 34329-2017
|
General requirements of fiber reinforced plastics pressure vessel
|
GB/T 34329-2017
|
|
GB/T 35156-2017
|
Fiber reinforced polymer composites structural cables
|
GB/T 35156-2017
|
|
GB/T 35465.1-2017
|
Test method for fatigue properties of polymer matrix composite materials -- Part 1: General principle
|
GB/T 35465.1-2017
|
|
GB/T 35465.2-2017
|
Test method for fatigue properties of polymer matrix composite materials -- Part 2: Statistical analysis of linear or linearized stress-life (S-N) and strain-life (ε-N) fatigue data
|
GB/T 35465.2-2017
|
|
GB/T 35465.3-2017
|
Test method for fatigue properties of polymer matrix composite materials -- Part 3: Tension-tension fatigue
|
GB/T 35465.3-2017
|
|
GB/T 21238-2016
|
Glass fiber reinforced plastics mortar pipes
|
GB/T 21238-2016
|
|
GB/T 32491-2016
|
Test method for long-term hydrostatic pressure of glass fiber reinforced thermosetting resin pipe and fittings
|
GB/T 32491-2016
|
|
GB/T 32493-2016
|
Test method of ballistic resistance for fibre reinforced composites -- Specific absorbed energy by perforation method
|
GB/T 32493-2016
|
|
GB/T 32497-2016
|
Test method of ballistic resistance against fragment simulating projectiles for fiber-reinforced composites -- V50 method
|
GB/T 32497-2016
|
|
GB/T 32788.1-2016
|
Test method for properties of prepreg -- Part 1: Determination of gel time
|
GB/T 32788.1-2016
|
|
GB/T 32788.2-2016
|
Test method for properties of prepreg -- Part 2: Determination for resin flow of prepreg
|
GB/T 32788.2-2016
|
|
GB/T 32788.3-2016
|
Test method for properties of prepreg -- Part 3: Determination of volatile content
|
GB/T 32788.3-2016
|
|
GB/T 32788.4-2016
|
Test method for properties of prepreg -- Part 4: Determination of tensile strength
|
GB/T 32788.4-2016
|
|
GB/T 32788.5-2016
|
Test method for properties of prepreg -- Part 5: Determination of resin content
|
GB/T 32788.5-2016
|
|
GB/T 32788.6-2016
|
Test method for properties of prepreg -- Part 6: Determination of mass per unit area
|
GB/T 32788.6-2016
|
|
GB/T 14206-2015
|
Glass fiber reinforced polyester continuous panels
|
GB/T 14206-2015
|
|
GB/T 31539-2015
|
Pultruded fiber reinforced polymer composites structural profiles
|
GB/T 31539-2015
|
|
GB/T 31956-2015
|
Glass fiber reinforced phenolic polymer panel for the construction
|
GB/T 31956-2015
|
|
GB/T 32376-2015
|
Elastic constants test method for fibre reinforced composites
|
GB/T 32376-2015
|
|
GB/T 32377-2015
|
Dynamic punch-shear properties test method for fibre reinforced composites
|
GB/T 32377-2015
|
|
GB/T 32378-2015
|
Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
|
GB/T 32378-2015
|
|
GB/T 32380-2015
|
Glass fiber reinforced plastic underground storage tank for petroleum products and alcohol gasoline mixture
|
GB/T 32380-2015
|
|
GB/T 30811-2014
|
Glass fiber reinforced plastic chimney liners for coal-fired units
|
GB/T 30811-2014
|
|
GB/T 30812-2014
|
Glass fiber reinforced plastic flue for coal-fired units
|
GB/T 30812-2014
|
|
GB/T 30967-2014
|
Practice for fiber reinforcement orientation codes for composite materials
|
GB/T 30967-2014
|
|
GB/T 30968.1-2014
|
Test method for open-hole/loaded-hole of polymer matrix composite laminates -- Part 1: Test method of bearing response
|
GB/T 30968.1-2014
|
|
GB/T 30968.2-2014
|
Test method for open-hole/loaded-hole of polymer matrix composite laminates -- Part 2: Test method of filled-hole tension and compression
|
GB/T 30968.2-2014
|
|
GB/T 30968.3-2014
|
Test method for open-hole/loaded-hole of polymer matrix composite laminates -- Part 3: Test method of open-hole tensile strength
|
GB/T 30968.3-2014
|
|
GB/T 30968.4-2014
|
Test method for open-hole/loaded-hole of polymer matrix composite laminates -- Part 4: Test method of open-hole compressive strength
|
GB/T 30968.4-2014
|
|
GB/T 30969-2014
|
Test method for short-beam shear strength of polymer matrix composite materials
|
GB/T 30969-2014
|
|
GB/T 30970-2014
|
Test method for the shear properties of polymer matrix composite materials by V-notched beam method
|
GB/T 30970-2014
|