|
US$1299.00 · In stock
Delivery: <= 10 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 34329-2017: General requirements of fiber reinforced plastics pressure vessel
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 34329-2017 | English | 1299 |
Add to Cart
|
10 days [Need to translate]
|
General requirements of fiber reinforced plastics pressure vessel
| Valid |
GB/T 34329-2017
|
PDF similar to GB/T 34329-2017
Basic data | Standard ID | GB/T 34329-2017 (GB/T34329-2017) | | Description (Translated English) | General requirements of fiber reinforced plastics pressure vessel | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Q23 | | Classification of International Standard | 83.120 | | Word Count Estimation | 65,668 | | Date of Issue | 2017-10-14 | | Date of Implementation | 2018-09-01 | | Regulation (derived from) | National Standard Announcement 2017 No. 26 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 34329-2017: General requirements of fiber reinforced plastics pressure vessel---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General requirements of fiber reinforced plastics pressure vessel
ICS 83.120
Q23
National Standards of People's Republic of China
Fiber-reinforced plastic pressure vessels - General requirements
2017-10-14 Published
2018-09-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Directory
Preface Ⅰ
1 Scope 1
2 Normative references 1
3 Terms and definitions 2
4 classification and marking 2
5 material 3
6 design 3
7 made 37
8 quality inspection and requirements 40
9 logo, packaging, transportation and storage 44
Factory Information 44
Appendix A (Normative) Analysis and Design Method (Discontinuous Analysis) 46
Appendix B (Informative) Fiber-reinforced plastic pressure vessel technology assessment 51
Appendix C (Normative) Thermoplastic lining and structural layer interface shear strength test method 54
Appendix D (Informative) Fiber reinforced plastics pressure vessels Acoustic emission detection methods 57
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard proposed by the China Building Materials Federation.
This standard by the National Fiber Reinforced Plastics Standardization Technical Committee (SAC/TC39) centralized.
This standard was drafted unit. Nanjing New Nuclear Composite Materials Co., Ltd., Shengli Oilfield new large pipe technology development limited liability company, Jizhou
Italy Composite Materials Co., Ltd., Shanghai Special Equipment Supervision and Inspection Technology Research Institute, Tianhua Chemical Machinery and Automation Research and Design Institute have
Limited, Hangzhou Zhonghao Technology Co., Ltd., Hebei Knight FRP Co., Ltd., Aixi composite materials (Jiaxing) Co., Ltd., Asia and Germany Chemical
Equipment (Shanghai) Co., Ltd., Huachang Polymers Co., Ltd. of East China University of Science and Technology, Zhangjiagang City of Italy FRP Manufacturing Co., Ltd..
The main drafters of this standard.Li Zhongjiang, Li Guoshu, Yang Yuqing, Sang Linchun, Hang Suping, Wu Yongtai, Tong Xinyang, Yang Meng, Xu Zhijun, Mao Ye,
Zhang Zhi, Luo Xiaoming, Xiong Tao, Yang Jichun, Zhang Fubin, Cao Xingzhen, Xu Li, Huang Haoxin, Zhao Zhinong, Wang Bo, Zhang Nan.
Fiber-reinforced plastic pressure vessels - General requirements
1 Scope
This standard specifies the terms and definitions of fiber-reinforced plastic pressure vessels, classification and marking, materials, design, manufacture, quality requirements and inspection
Inspection, marking, packaging, transportation and storage, factory information and so on.
This standard applies to the inner diameter of less than or equal to 4800mm, design pressure 0.1MPa ~ 1.6MPa, design temperature of -54 ℃ ~
120 ℃, the design pressure and the inner diameter of the product is less than or equal to 2.40MPa · m fixed fiber reinforced plastic pressure vessel (hereinafter referred to as pressure
Force container).
This standard does not apply to the following pressure vessels.
a) Mobile pressure vessels, gas cylinders, oxygen tanks;
b) The normal operation of the working pressure is less than 0.1MPa containers (including the feed or discharge process needs instantaneous pressure greater than
Or a container equal to 0.1 MPa);
c) Pressure vessels containing extremely toxic or highly toxic media or liquefied gases.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
Pressure vessels Part 1 GB/T 150.1 General requirements
Pressure vessels - Part 4. Manufacture, inspection and acceptance
GB/T 1446 fiber-reinforced plastics performance test methods General
Test method for tensile properties of GB/T 1447 fiber reinforced plastics
Standard Test Method for Compressive Properties of GB/T 1448 Fiber Reinforced Plastics
Test method for bending properties of GB/T 1449 fiber reinforced plastics
GB/T 1450.1 Fiber reinforced plastics - Determination of interlaminar shear strength
GB/T 1634.2-2004 Determination of plastic deformation temperature of the load - Part 2. Plastic, hard rubber and long fiber reinforced composite
material
GB/T 2577 glass fiber reinforced plastic resin content test methods
GB/T 3854 reinforced plastic Barcol hardness test method
Test method for chemical resistant properties of glass fiber reinforced thermosetting plastics GB/T
GB/T 3961 fiber-reinforced plastic terminology
Liquid unsaturated polyester resin for GB/T 8237 fiber reinforced plastics
GB/T 13657 bisphenol A epoxy resin
GB/T 17470 fiberglass chopped strand mat and continuous strand mat
GB/T 18369 glass fiber rovings
GB/T 18370 glass fiber roving cloth
GB/T 22789.1 rigid PVC sheet classification, size and performance - Part 1. Thickness of 1mm above the plate
GB 50009 Building structural load specifications
HG/T 4090 plastic lining equipment EDM test methods
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 34329-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 34329-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 6 ~ 10 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 34329-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 34329-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|