|
US$339.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 21239-2022: Test method for compression after impact properties of fiber reinforced plastic laminates
Status: Valid GB/T 21239: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 21239-2022 | English | 339 |
Add to Cart
|
4 days [Need to translate]
|
Test method for compression after impact properties of fiber reinforced plastic laminates
| Valid |
GB/T 21239-2022
|
| GB/T 21239-2007 | English | 479 |
Add to Cart
|
3 days [Need to translate]
|
Test method for compression after impact properties of fiber reinforced plastic laminates
| Obsolete |
GB/T 21239-2007
|
PDF similar to GB/T 21239-2022
Basic data | Standard ID | GB/T 21239-2022 (GB/T21239-2022) | | Description (Translated English) | Test method for compression after impact properties of fiber reinforced plastic laminates | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Q23 | | Classification of International Standard | 83.120 | | Word Count Estimation | 18,190 | | Date of Issue | 2022-10-14 | | Date of Implementation | 2023-02-01 | | Older Standard (superseded by this standard) | GB/T 21239-2007 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 21239-2022: Test method for compression after impact properties of fiber reinforced plastic laminates
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method for compression after impact properties of fiber reinforced plastic laminates
ICS 83.120
CCSQ23
National Standards of People's Republic of China
Replacing GB/T 21239-2007
Fiber Reinforced Plastic Laminate
Test method for compression performance after impact
Published on 2022-10-12
2023-02-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration
directory
Preface I
1 Scope 1
2 Normative references 1
3 Terms, Definitions and Symbols 1
4 Method principle 1
5 Sample 2
6 Test conditions 4
7 Test equipment 4
8 Test Step 5
9 Result calculation 6
10 Test report 7
Appendix A (Informative) Determination of Conditional Impact Energy 8
Appendix B (Informative) Impact Test Support Fixture 10
Appendix C (Informative) Compression Test Fixtures After Impact 11
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"
drafted.
This document replaces GB/T 21239-2007 "Test method for compression performance of fiber-reinforced plastic laminates after impact", and
Compared with GB/T 21239-2007, in addition to structural adjustment and editorial changes, the main technical changes are as follows.
a) Added the content and calculation method of "effective compressive modulus after impact" and "ultimate compressive strain after impact" (see Chapter 1, 9.2 and
9.3);
b) Two definitions of "conditional impact energy" and "impact energy cut-off value" have been added (see Chapter 3);
c) increased the thickness of the arbitration specimen (see 5.2);
d) Other layup methods of laminates have been changed (see 5.3.3, 5.3.3 of the.2007 edition);
e) The requirements for non-destructive testing of laminates are added (see 5.4);
f) Added the content of "Conditional Impact Energy" (see 6.2.2);
g) The provisions of three measuring instruments, micrometer, caliper and depth gauge, have been added (see 7.2.2~7.2.4);
h) Added the provisions when the impact damage size is too large (see 8.5);
i) The provisions for the assembly of the specimen and the compression fixture have been added (see 8.7);
j) The requirements for the alignment of specimen installations have been added (see 8.8);
k) Added provisions for applying initial load, unloading, and strain gauge zeroing and balancing (see 8.9);
l) Added provisions for fixing lateral plates and sliding plates (see 8.10);
m) the operation of checking the strain values of the four strain gages has been changed (see 8.11, 8.7 of the.2007 edition);
n) Added "Test Validity Judgment Method" (see 8.13).
Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents.
This document is proposed by China Building Materials Federation.
This document is under the jurisdiction of the National Standardization Technical Committee of Fiber Reinforced Plastics (SAC/TC39).
This document is drafted by. China Aviation Development Beijing Institute of Aeronautical Materials, Weihai Guangwei Composite Materials Co., Ltd., Aviation Industry First
Aircraft Design and Research Institute, Beijing FRP Research and Design Institute Co., Ltd.
The main drafters of this document. Chen Xinwen, Wang Haipeng, Li Fengxuan, Wang Xiang, Ma Liting, Wang Li, Wang Yana, Deng Liwei, Yang Yang, Wang Zhandong,
Zhang Qin and Tian Yaowei.
This document was first published in.2007 and this is the first revision.
Fiber Reinforced Plastic Laminate
Test method for compression performance after impact
1 Scope
This document specifies the method, principle, sample, test conditions, test equipment, test
Test procedures, result calculations and test reports.
This document applies to the post-impact compressive strength, post-impact effective compression of continuous fibre-reinforced plastic laminates with balanced symmetrical plies
Determination of modulus and ultimate compressive strain after impact.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations
documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to
this document.
GB/T 1446 General Principles of Test Methods for the Properties of Fiber Reinforced Plastics
GB/T 3961 Terminology of Fiber Reinforced Plastics
3 Terms, Definitions and Symbols
3.1 Terms and Definitions
The terms and definitions defined in GB/T 3961 and the following apply to this document.
3.1.1
The single-layer thickness of the fiber-reinforced plastic laminate obtained by calculation.
3.1.2
The impact energy required for the material to reach a pit of a specified depth.
3.1.3
The maximum impact energy value determined according to the service conditions of the material.
3.2 Symbols
The following symbols apply to this document.
i, j, k---the number of times of repeated continuous laying of a single layer in the fiber-reinforced plastic laminate;
n --- the number of repetitions of the laying unit on one side of the symmetrical plane of the fiber-reinforced plastic laminate;
S --- Symmetrical laminate, after the fiber reinforced plastic paving unit is repeatedly paved n times, the symmetrical paving is carried out.
4 Principles of the method
After the sample is impacted with a certain energy at the center of the sample along the thickness direction, a compressive load is applied to the sample along the length direction until the sample is
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 21239-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 21239-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 21239-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 21239-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 21239-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 21239-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|