|
US$119.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32788.3-2016: Test method for properties of prepreg -- Part 3: Determination of volatile content
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 32788.3-2016 | English | 119 |
Add to Cart
|
3 days [Need to translate]
|
Test method for properties of prepreg -- Part 3: Determination of volatile content
| Valid |
GB/T 32788.3-2016
|
PDF similar to GB/T 32788.3-2016
Basic data | Standard ID | GB/T 32788.3-2016 (GB/T32788.3-2016) | | Description (Translated English) | Test method for properties of prepreg -- Part 3: Determination of volatile content | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Q23 | | Classification of International Standard | 83.120 | | Word Count Estimation | 6,637 | | Date of Issue | 2016-06-14 | | Date of Implementation | 2017-05-01 | | Quoted Standard | GB/T 1446 | | Adopted Standard | ISO 9782-1993, MOD | | Regulation (derived from) | National Standard Announcement No. 8 of 2016 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the principles, apparatus and equipment, samples, test conditions, test procedures, test results and test reports of the volatile content of impregnated materials. This standard applies to carbon fiber, glass fiber, aramid fiber as a reinforcing material, thermosetting resin matrix for the determination of the content of prepreg volatiles. If aramid fiber is used as a reinforcing material, the moisture absorbed by the fiber volatilizes with the volatiles at the test temperature, so the moisture content is corrected for the volatiles content. | GB/T 32788.3-2016: Test method for properties of prepreg -- Part 3: Determination of volatile content
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method for properties of prepreg - Part 3. Determination of volatile content
ICS 83.120
Q23
National Standards of People's Republic of China
Test method for performance of prepregs
Part 3. Determination of volatile matter content
Part 3. Determinationofvolatilecontent
(ISO 9782..1993, Plastic-Resinforcedmouldingcompoundsand
prepregs-Determination ofapparentvolatile-mattercontent, MOD)
2016-06-14 release
2017-05-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
China National Standardization Management Committee released
Foreword
GB/T 32788 "Prepreg performance test method" is divided into six parts.
Part 1. Determination of gel time;
- Part 2. Determination of resin fluidity;
Part 3. Determination of volatile matter content;
- Part 4. Determination of tensile strength;
- Part 5. Determination of resin content;
Part 6. Determination of mass per unit area.
This part is part 3 of GB/T 32788.
This part is drafted in accordance with the rules given in GB/T 1.1-2009.
This part uses the re-drafting method to modify the use of ISO 9782..1993 "Plastic Expanded Mold and Prepregs for the apparent volatiles content
Of the determination ".
This section has a greater structural adjustment compared to ISO 9782..1993, which is listed in Appendix A and ISO 9782..1993
Chapter number comparison list.
The technical differences between this section and ISO 9782..1993 are as follows.
This standard applies to the determination of the content of volatile materials for pre-dipped yarns, tapes, felt (SMC) and fabrics. This standard applies to all unidirectional and
Multi-directional fiber-reinforced prepreg and all thermosetting resin substrates, unless otherwise specified in the technical conditions. This method does not apply
In the non-impregnated reinforced fiber "modified to" This part applies to carbon fiber, glass fiber, aramid fiber as a reinforcing material to
Determination of Volatile Content of Prepregs for Thermosetting Resins "(see Chapter 1);
--- replace GB 291..1997 with GB/T 1446 (see Chapter 2);
- Modification of the "state adjustment and test environment" requirements, in coordination with other parts of this standard (see Chapter 6);
--- increase the "test step" in the weighing accuracy;
Place the sample on a pre-weighed aluminum foil or container or hang it on a shelf with a hook and place it in a preheated to a specified temperature
Temperature of the oven, if no technical conditions, recommended the use of Table 1 conditions for determination. "Changed to" put the sample in a pre-weighing
Of the aluminum foil or in the container, or with a hook on the shelf, put it into the blast oven has been preheated to the specified temperature. "And" try
Temperature and constant temperature according to the provisions of the technical conditions of prepreg; if the technical conditions are not clearly defined, recommended in Table 1 test temperature
Degrees and constant temperature. "(See 7.4, 7.5);
--- Increases the symbol "VC" of the volatile content of the prepreg.
This section makes the following editorial changes.
- Change the standard name to "Test method for prepreg properties Part 3. Determination of volatile matter";
--- Added Appendix A (informative) "This section is in contrast to chapter numbering of ISO 9782..1993".
This section is proposed by the China Building Materials Federation.
This part of the National Fiber Reinforced Plastics Standardization Technical Committee (SAC/TC39) centralized.
This part is responsible for the drafting unit. Harbin FRP Research Institute.
This part participates in the drafting unit. AVIC Composite Material Co., Ltd., Hebei Haozheng Non-metallic Material Testing Service Co., Ltd., Lei Ke
Germany (polymer) Tianjin Co., Ltd., Jiangsu Hengshen Co., Ltd., Qihe County, Xingda Composite Materials Co., Ltd.
The main drafters of this part. Wang Baorui, Ding Xinjing, Sun Yuanjun, Ren Kun, Li Jinliang, Liu Dongxun, Zhang Rongqi, Yu Hao, Li Hongjiang, He Tao.
Test method for performance of prepregs
Part 3. Determination of volatile matter content
1 Scope
This part of GB/T 32788 specifies the principles, apparatus and equipment, samples, test conditions, test procedures,
Test results and test report.
This part is suitable for carbon fiber, glass fiber, aramid fiber as a reinforcing material, thermosetting resin as the base of the prepreg volatile
Determination of content.
If the aramid fiber as a reinforcing material, at the test temperature, the moisture absorbed by the fiber will evaporate with the volatiles, so deduct moisture
Content to correct the volatile content.
Note. The results of the polyester resin matrix prepreg are lower than the actual value.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 1446 Fiber reinforced plastics - Test methods - General
3 principle
The sample in the blast oven heated to the specified temperature, constant temperature after a certain period of time to remove volatile matter, according to the quality of samples before and after heating
The volatiles content was calculated.
4 instruments and equipment
4.1 Cutting tools. for sample preparation.
4.2 Analysis of balance. sense of 0.001g.
4.3 blast oven. temperature control accuracy ± 5 ℃.
4.4 Dryers.
4.5 Suitable samples contain containers such as evaporates, hooks or aluminum foils.
5 samples
5.1 Sampling method according to the technical conditions of prepreg.
5.2 The specimen shall be at least (1 x 104) mm2 or 1 g, and the shape of the specimen may be circular, square or other suitable shape.
5.3 Sampling along the length when the width is less than 300mm. The sampling position is at least 50 mm from the edge.
5.4 The number of samples is not less than 3.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 32788.3-2016_English be delivered?Answer: Upon your order, we will start to translate GB/T 32788.3-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 32788.3-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 32788.3-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|