|
Std ID |
Description (Standard Title) |
|
GB/T 18912-2024
|
Salt mist corrosion testing of photovoltaic (PV) modules
|
|
GB/T 45021.1-2024
|
Photovoltaic (PV) module performance testing and energy rating - Part 1: Irradiance and temperature performance measurements and power rating
|
|
GB/T 42633-2023
|
General specification of solar cells for aerospace
|
|
GB/T 28866-2012
|
Characteristic parameters of stand-alone photovoltaic (PV) systems
|
|
GB/T 29195-2012
|
General specification of crystalline silicon terrestrial solar cells
|
|
GB/T 29196-2012
|
Technical specification for stand -- Alone photovoltaic systems
|
|
GB/T 6495.10-2012
|
Photovoltaic devices -- Part 10: Methods of linearity measurement
|
|
GB/T 20046-2006
|
Photovoltaic (PV) systems -- Characteristics of the utility interface
|
|
GB/T 20047.1-2006
|
Photovoltaic (PV) module safety qualification -- Part 1: Requirements for construction
|
|
GB/T 20513-2006
|
Photovoltaic system performance monitoring -- Guidelines for measurement, data exchange and analysis
|
|
GB/T 20514-2006
|
Photovoltaic systems -- Power conditioners -- Procedure for measuring efficiency
|
|
GB/T 6495.7-2006
|
Photovoltaic devices -- Part 7: Computation of spectral mismatch error introduced in the testing of a photovoltaic device
|
|
GB/T 6495.9-2006
|
Photovoltaic devices -- Part 9: Solar simulator performance requirements
|
|
GB/T 19393-2003
|
Rating of direct coupled photovoltaic (PV) -- Pumping systems
|
|
GB/T 19394-2003
|
UV test for photovoltaic (PV) modules
|
|
GB/T 18911-2002
|
Thin-film terrestrial photovoltaic (PV) modules -- Design qualification and type approval
|
|
GB/T 18912-2002
|
Salt mist corrosion testing of photovoltaic (PV) modules
|
|
GB/T 6495.8-2002
|
Photovoltaic devices -- Part 8: Measurement of spectral response of a photovoltaic (PV) device
|
|
GB/T 18210-2000
|
Crystalline silicon photovoltaic (PV) array. On-site measurement of I-V characteristics
|
|
GB/T 6495.5-1997
|
Photovoltaic devices. Part 5: Determination of the equivalent cell temperature(ECT) of photovoltaic (PV)devices by the open-circuit voltage method
|
|
GB/T 6495.1-1996
|
Photovoltaic devices. Part 1: Measurement of photovoltaic current-voltage characteristics
|
|
GB/T 6495.2-1996
|
Photovoltaic devices. Part 2: Requirements for reference solar cells
|
|
GB/T 6495.3-1996
|
Photovoltaic devices. Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data
|
|
GB/T 6495.4-1996
|
Procedures for temperature and irradiance corrections to measured I-Vcharacteristics of crystalline silicon photovoltaic devices
|
|
GB/T 14007-1992
|
(Land with solar modules. General specification)
|
|
GB/T 14008-1992
|
(Sea with solar modules. General specification)
|
|
GB/T 14009-1992
|
Measurement procedures for parameters of solar cell modules
|
|
GB/T 12632-1990
|
General specification of single silicon solar cells
|
|
GB/T 12637-1990
|
General specification for solar simulator
|
|
GB/T 11009-1989
|
Measuring methods of spectral response for solar cells
|
|
GB/T 11010-1989
|
Spectrum standard solar cell
|
|
GB/T 11011-1989
|
General rules for measurements of electrical characteristics of amorphous silicon solar cells
|
|
GB/T 31036-2025
|
Proton exchange membrane fuel cell backup power system - Safety
|
|
GB/T 45565-2025
|
Coding regulations of lithium ion batteries
|
|
GB/T 32509-2025
|
General specification for vanadium flow battery
|
|
GB/T 33339-2025
|
Test method for vanadium flow battery system
|
|
GB/T 20042.4-2025
|
Proton exchange membrane fuel cell - Part 4: Test method for electrocatalysts
|
|
GB/T 46314-2025
|
Primary battery material terminology
|
|
GB/T 20042.6-2024
|
Proton exchange membrane fuel cell - Part 6: Test method of bipolar plate properties
|
|
GB/T 22084.2-2024
|
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 2: Nickel-metal hydride
|
|
GB/T 23751.3-2024
|
Micro fuel cell power systems - Part 3: Fuel cartridge interchangeability
|
|
GB/T 43691.1-2024
|
Fuel cell modules - Part 1: Safety
|
|
GB/T 43695-2024
|
Energy conversion efficiency requirements and measurement methods for lithium ion cells and batteries
|
|
GB/T 20042.5-2024
|
Proton exchange membrane fuel cell - Part 5: Test method for membrane electrode assembly
|
|
GB/T 20042.7-2024
|
Proton exchange membrane fuel cells - Part 7: Test method of carbon paper properties
|
|
GB/T 8897.6-2024
|
Primary batteries - Part 6: Guidance on environmental aspects
|
|
GB/T 20042.2-2023
|
Proton exchange membrane fuel cell - Part 2: General technical specification of fuel cell stacks
|
|
GB/T 42471-2023
|
Nanotechnologies - Bending test of flexible energy storage nanodevices
|
|
GB/T 42635-2023
|
General specification of lithium-ion cells for aerospace
|
|
GB/T 42728-2023
|
Guidelines for safety design of lithium ion batteries
|
|
GB/T 42729-2023
|
Guidelines for safety use of lithium ion cells and batteries
|
|
GB/T 42847.2-2023
|
Energy storage systems using fuel cell modules in reverse mode - Part 2: Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation
|
|
GB/T 42847.3-2023
|
Energy storage systems using fuel cell modules in reverse mode - Part 3: Test procedures for the performance of energy storage systems
|
|
GB/T 20042.3-2022
|
Proton exchange membrane fuel cell - Part 3: Test method for proton exchange membrane
|
|
GB/T 27748.2-2022
|
Stationary fuel cell power system - Part 2: Performance test methods
|
|
GB/T 28817-2022
|
Single cell test methods for polymer electrolyte fuel cell (PEFC)
|
|
GB/T 8897.1-2021
|
Primary batteries - Part 1: General
|
|
GB/T 8897.2-2021
|
Primary batteries - Part 2: Physical and electrical specifications
|
|
GB/T 8897.3-2021
|
Primary batteries - Part 3: Watch batteries
|
|
GB/T 40559-2021
|
Lithium ion cells and batteries used in self-balancing vehicle - Safety requirements
|
|
GB/T 41134.1-2021
|
Fuel cell power systems for industrial electric trucks - Part 1: Safety
|
|
GB/T 41134.2-2021
|
Fuel cell power systems for industrial electric trucks - Part 2: Performance test methods
|
|
GB/T 28816-2020
|
Fuel cell--Terminology
|
|
GB/T 38914-2020
|
Evaluation method for lifetime of proton exchange membrane fuel cell stack in vehicle application
|
|
GB/T 38954-2020
|
Hydrogen fuel cell power system for unmanned aerial vehicles
|
|
GB/T 36288-2018
|
Fuel cell electric vehicles -- Safety requirement of fuel cell stack
|
|
GB/T 36544-2018
|
Proton exchange membrane fuel cell power supply system for power distribution substation
|
|
GB/T 20155-2018
|
Determination of mercury, cadmium and lead in battery
|
|
GB/T 20042.1-2017
|
Proton exchange membrane fuel cell - Part 1: Terminology
|
|
GB/T 33983.2-2017
|
Direct methanol fuel cell system - Part 2: Performance test method
|
|
GB/T 33978-2017
|
Proton exchange membrane fuel cell modules for road vehicles
|
|
GB/T 33979-2017
|
Test methods for proton exchange membrane fuel cell power system at subzero environment
|
|
GB/T 23751.2-2017
|
Micro fuel cell power systems -- Part 2: Performance test methods
|
|
GB/T 27748.1-2017
|
Stationary fuel cell power systems -- Part 1: Safety
|
|
GB/T 27748.3-2017
|
Stationary fuel cell power system -- Part 3: Installation
|
|
GB/T 27748.4-2017
|
Stationary fuel cell power systems -- Part 4: Performance test methods for small fuel cell power systems
|
|
GB/T 33983.1-2017
|
Direct methanol fuel cell system - Part 1: Safety
|
|
GB/T 34582-2017
|
Single cell and stack performance test methods for solid oxide fuel cells (SOFC)
|
|
GB/T 34866-2017
|
Vanadium flow battery -- Safety requirements
|
|
GB/T 34872-2017
|
Technical requirements of hydrogen supply system for proton exchange membrane fuel cells
|
|
GB/T 32509-2016
|
General specification for vanadium flow battery
|
|
GB/T 33339-2016
|
Vanadium flow battery system - Test method
|
|
GB/T 31886.1-2015
|
Test Method about the Influence of Gaseous Contaminants in Reaction Gas on the Performance of Proton Exchange Membrane Fuel Cell - Part 1: Gaseous Contaminants in Air
|
|
GB/T 31886.2-2015
|
Test Method about the Influence of Gaseous Contaminants in Reaction Gas on the Performance of Proton Exchange Membrane Fuel Cell - Part 2: Gaseous Contaminants in Hydrogen
|
|
GB/T 31035-2014
|
Test methods for proton exchange membrane fuel cell stack at subzero environment
|
|
GB/T 31037.1-2014
|
Fuel cell power system used for industrial lift truck applications - Part 1: Safety
|
|
GB/T 31037.2-2014
|
Fuel cell power system used for industrial lift truck applications - Part 2: Technical specification
|
|
GB/T 20042.7-2014
|
Proton exchange membrane fuel cells - Part 7: Test method of carbon paper properties
|
|
GB/T 31036-2014
|
Proton exchange membrane fuel cell backup power system - Safety
|
|
GB/T 18287-2013
|
General specification of lithium-ion cells and batteries for mobile phone
|
|
GB/T 27748.2-2013
|
Stationary fuel cell power systems -- Part 2: Performance test methods
|
|
GB/T 29840-2013
|
Vanadium flow battery -- Terminology
|
|
GB/T 30084-2013
|
Portable fuel cell power system -- Safety
|
|
GB/T 8897.1-2013
|
Primary batteries -- Part 1: General
|
|
GB/T 8897.2-2013
|
Primary batteries -- Part 2: Physical and electrical specifications
|
|
GB/T 8897.3-2013
|
Primary batteries -- Part 3: Watch batteries
|
|
GB/T 28816-2012
|
Fuel cell -- Terminology
|
|
GB/T 28817-2012
|
Single cell test methods for polymer electrolyte fuel cell (PEFC)
|
|
GB/T 28867-2012
|
Secondary cells and batteries containing alkaline or other non-acid electrolytes -- Sealed nickel-cadmium prismatic rechargeable single cells
|
|
GB/T 20042.6-2011
|
Proton exchange membrane fuel cell - Part 6: Test method for bipolar plate properties
|