HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 20155-2018 English PDF

US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 20155-2018: Determination of mercury, cadmium and lead in battery
Status: Valid

GB/T 20155: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 20155-2018English279 Add to Cart 3 days [Need to translate] Determination of mercury, cadmium and lead in battery Valid GB/T 20155-2018
GB/T 20155-2006English359 Add to Cart 3 days [Need to translate] Determination of mercury, cadmium and lead in battery Obsolete GB/T 20155-2006

PDF similar to GB/T 20155-2018


Standard similar to GB/T 20155-2018

GB/T 20042.6   GB/T 20042.5   GB/T 20042.7   GB/T 45565   GB/T 31036   

Basic data

Standard ID GB/T 20155-2018 (GB/T20155-2018)
Description (Translated English) Determination of mercury, cadmium and lead in battery
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard K82
Classification of International Standard 29.220.10
Word Count Estimation 14,152
Date of Issue 2018-12-28
Date of Implementation 2018-12-28
Older Standard (superseded by this standard) GB/T 20155-2006
Quoted Standard GB/T 603; GB/T 6682-2008; GB/T 8897.2
Regulation (derived from) National Standard Announcement No. 17 of 2018
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration
Summary This standard specifies the detection method for mercury, cadmium and lead in batteries. This standard is applicable to the determination of mercury, cadmium and lead in small sealed primary batteries complying with GB/T 8897.2 and the mass of single cells is not more than 200 g. The measurement range is: mercury content: 0.05 ��g/g to 100 mg/g; cadmium content

GB/T 20155-2018: Determination of mercury, cadmium and lead in battery

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Determination of mercury, cadmium and lead in battery ICS 29.220.10 K82 National Standards of People's Republic of China Replace GB/T 20155-2006 Determination of mercury, cadmium and lead in batteries Published on.2018-12-28 2018-12-28 implementation State market supervision and administration China National Standardization Administration issued

Content

Foreword I 1 Scope 1 2 Normative references 1 3 Test Method---Summary 1 4 Test conditions 1 5 General reagents and equipment 2 6 sample 2 7 Method 1 Determination of mercury content Cold atomic absorption spectrometry AAS 4 8 Methods Determination of mercury content Atomic fluorescence spectrometry AFS 5 9 Methods for determination of tricadmium and lead content by flame atomic absorption spectrometry FAAS 7 10 Methods Determination of tetracadmium and lead content Inductively coupled plasma atomic emission spectrometry ICP-AES 8 11 Quality Assurance and Control 9 12 Test report 9 Appendix A (informative) Instrument reference working conditions 10 Reference 11

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 20155-2006 "Determination of mercury, cadmium and lead in batteries". Compared with GB/T 20155-2006, the main technical changes of this standard are as follows. --- Revised the scope of application of the standard (see Chapter 1); --- Increased handling of battery pack samples (see 6.2); --- Revised "Ammonia content determination cold atomic absorption spectrometry AAS" (see Chapter 7,.2006 edition 2.1); --- Added "Measurement of cadmium and lead content by flame atomic absorption spectrometry FAAS" (see Chapter 9,.2006 and 2.2 and 2.3). This standard was proposed by the China Light Industry Association. This standard is under the jurisdiction of the National Primary Battery Standardization Technical Committee (SAC/TC176). This standard was drafted. Wuxi Product Quality Supervision and Inspection Institute, Light Industry Chemical Power Research Institute, National Chemical Power Product Quality Supervision Supervisory Inspection Center, Zhejiang Mustang Battery Co., Ltd., Guangzhou Hutou Battery Group Co., Ltd., BOC (Ningbo) Battery Co., Ltd., IV Chuan Changhong New Energy Technology Co., Ltd., Fujian Nanping Nanfu Battery Co., Ltd., Suzhou Quality and Technical Supervision Comprehensive Inspection and Testing Xinxin, Guangxi Yinzhou Xinhua Battery Co., Ltd., Zhejiang Hengwei Battery Co., Ltd., Jiaxing Xiaoyue Battery Co., Ltd., Jiaxing City Dego Power Technology Co., Ltd. The main drafters of this standard. Wang Haibo, Bao Jun, Chen Shuibiao, Liu Wei, Chen Guobiao, Wang Shengbing, Xiao Qicong, Wu Zhen, Zhang Dongbing, Chen Zuowang, Gu Zhengjian, Yang Jun, Ma Kuixiang, Zhao Liwei, Xu Hualei, Fu Jiqing, Lu Yanfang, Jiang Jin, He Li, Wu Minji. The previous versions of the standards replaced by this standard are. ---GB/T 20155-2006. Determination of mercury, cadmium and lead in batteries Warning---The hydrochloric acid and nitric acid used in this standard are volatile and corrosive. Avoid inhalation or contact with skin when splashing. Rinse immediately with plenty of water and seek medical attention if it is severe.

1 Scope

This standard specifies the detection method for mercury, cadmium and lead in batteries. This standard is applicable to mercury, cadmium and lead in small sealed primary batteries complying with GB/T 8897.2 and the mass of single cells is not more than.200g. Determination of the content. Measurement range. mercury content 0.05μg/g~100mg/g; cadmium content 1.0μg/g~100mg/g; lead content 5.0μg/g~100mg/g. Note. The lower limit of the measurement range of each element varies with the precision performance of the instrument and the dilution factor at the time of preparation of the sample solution. Reduce the total volume of the sample solution or Increasing the sample weight can reduce the lower limit of the measurement range of mercury, cadmium and lead. For example, when the accuracy of the instrument meets the requirements of this standard, when the sample is When the total volume of the solution is half of the "Table 1 battery mass range, model example and reagent amount added", the lower limit of the measurement range is. mercury 0.025 μg/g, Cadmium 0.5μg/g, lead 2.5μg/g; when the sample solution is prepared with a dilution factor of 5 (battery sample mass 20g sample solution total volume 100mL), measured The lower limit of the range is. mercury 0.01 μg/g, cadmium 0.2 μg/g, lead 1.0 μg/g.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. Preparation of preparations and products used in GB/T 603 chemical reagent test method GB/T 6682-2008 Analytical laboratory water specifications and test methods GB/T 8897.2 Primary batteries Part 2. Dimensions and electrical performance requirements 3 Test Methods---Summary After the battery was dissected, the sample solution was prepared by decomposing with nitric acid and hydrochloric acid and filtering. Method 1 - Cold Atomic Absorption Spectrometry or Method 2 Determination of mercury content by sub-fluorescence spectroscopy, method three flame atomic absorption spectrometry or method four inductively coupled plasma atomic emission Spectrometric determination of lead and cadmium content.

4 test conditions

4.1 Environmental conditions Unless otherwise specified, the inspection shall be carried out in the following environments. a) Temperature. 15 ° C ~ 35 ° C; b) Relative humidity. 30%~90%; c) Atmospheric pressure. 86kPa~106kPa. 4.2 Safety conditions Appropriate protective measures should be taken to prevent personal injury.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 20155-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 20155-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 20155-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 20155-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 20155-2018?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 20155-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.