GB/T 8897.1-2021 PDF in English
GB/T 8897.1-2021 (GB/T8897.1-2021, GBT 8897.1-2021, GBT8897.1-2021)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 8897.1-2021 | English | 605 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Primary batteries - Part 1: General
| Valid |
| GB/T 8897.1-2013 | English | RFQ |
ASK
|
3 days
|
Primary batteries -- Part 1: General
| Obsolete |
| GB/T 8897.1-2008 | English | RFQ |
ASK
|
9 days
|
Primary batteries -- Part 1: General
| Obsolete |
| GB/T 8897.1-2003 | English | RFQ |
ASK
|
4 days
|
Primary batteries -- Part 1: General
| Obsolete |
| GB/T 8897-1996 | English | RFQ |
ASK
|
9 days
|
Primary batteries: General
| Obsolete |
| GB 8897-1988 | English | RFQ |
ASK
|
3 days
|
Primary batteries: General
| Obsolete |
Standards related to (historical): GB/T 8897.1-2021
PDF Preview
GB/T 8897.1-2021: PDF in English (GBT 8897.1-2021) GB/T 8897.1-2021
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 29.220.10
K 82
Replacing GB/T 8897.1-2013
Primary Batteries – Part 1: General
(IEC 60086-1:2015, MOD)
ISSUED ON: MAY 21, 2021
IMPLEMENTED ON: NOVEMBER 01, 2021
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 6
2 Normative References ... 6
3 Terms and Definitions ... 6
4 Requirements ... 9
5 Performance - Testing ... 17
6 Performance – Test Conditions ... 20
7 Sampling and Quality Assurance ... 23
8 Battery Packaging ... 23
Annex A (Normative) Criteria for the Standardization of Batteries ... 24
Annex B (Normative) Recommendations for Equipment Design ... 25
Annex C (Normative) Designation System (Nomenclature) ... 27
Annex D (Informative) Warning Sign ... 41
Annex E (Normative) Packaging and Child-Resistant Disassembly Requirements for
Coin Batteries ... 44
Annex F (Informative) Usage of Warning Sign for “Keeping away from Children” . 48
Annex G (Informative) Standard Discharge Voltage – Definition and Method of
Determination ... 50
Annex H (Informative) Preparation of Standard Methods of Measuring Performance
(SMMP) of Consumer Goods ... 54
Annex I (Informative) Calculation Method for the Specified Value of Minimum
Average Duration ... 55
Annex J (Normative) Code of Practice for Packaging, Shipment, Storage, Use and
Disposal of Primary Batteries ... 56
Bibliography ... 59
Foreword
GB/T 8897 Primary Batteries consists of the following 5 parts:
--- Part 1: General;
--- Part 2: Physical and Electrical Specifications;
--- Part 3: Watch Batteries;
--- Part 4: Safety of Lithium Batteries;
--- Part 5: Safety of Batteries with Aqueous Electrolyte.
This Part is Part 1 of GB/T 8897.
This Part was drafted as per the rules specified in GB/T 1.1-2009.
This Part replaced GB/T 8897.1-2013 Primary Batteries – Part 1: General. Compared with
GB/T 8897.1-2013, the major technical changes of this Part are as follows:
--- Modify the definition of coin/button cell battery to better handle the problem of coil cell
being swallowed by mistake (see 3.3 and 3.6 of this Edition; 3.3 of 2013 Edition);
--- Move the performance testing general rules from Annex E to main text 5.1 (see 5.1 of
this Edition; Annex E of 2013 Edition);
--- Modify the number of inspection batteries, the number of inspection batteries is changed
from 9 to 8, and the average value of the result calculation is not excluded (see 5.3 of
this Edition; 5.3 of 2013 Edition);
--- Modify the relative humidity conditions of non-P system batteries in Table 3 (see 6.1 of
this Edition; 6.1 of 2013 Edition);
--- Increase the standard discharge voltage of Y chemical system and W chemical system
battery (see Annex G.3 of this Edition);
--- Modify the order of the annex to make it consistent with the order of appearance in the
main text, and added explanatory text at the position where the main text appeared for
the first time;
--- Add Annex D (informative) warning sign (see Annex D of this Edition);
--- Add Annex E (normative) on the packaging and child-resistant disassembly requirements
of coin batteries (see Annex E of this Edition);
---Add Annex F (informative) the use of the warning sign "keep away from children" (see
Annex F of this Edition).
This Part uses redrafting method to modify and adopt IEC 60086-1:2015 Primary Batteries –
Part 1: General.
The technical differences and the causes between this Part and IEC 60086-1:2015 are as follows:
--- Regarding normative references, this Part has made adjustments with technical
differences to adapt to the technical conditions of China. The adjustments are
concentrated in Clause 2 "Normative References". The specific adjustments are as
follows:
Use GB/T 8897.2-2021 that modifies and adopts the international standard to
replace IEC 60086-2:2015;
Use GB/T 8897.3-2021 that modifies and adopts the international standard to
replace IEC 66086-3:2016;
Delete IEC 60086-4:2014 and IEC 60086-5:2016.
--- Add the definition of explosion (see 3.23 of this Edition).
--- Modify the maximum open-circuit voltage in the F-system battery from 1.83V to 1.90V
(see 4.1.4 of this Edition).
--- Modify the marking requirements, so as to meet the requirements of China’s relevant
regulations and standards (see 4.1.6 of this Edition).
--- Modify the requirements for the battery listed in the national standard, so as to comply
with the actual conditions of China [see c) and d) of Annex A of this Edition].
--- Add Annex D (informative) warning sign (see Annex D of this Edition);
--- Add Annex E (normative) on the packaging and child-resistant disassembly requirements
of coin batteries (see Annex E of this Edition);
---Add Annex F (informative) the use of the warning sign "keep away from children" (see
Annex F of this Edition).
This Part was proposed by China National Light Industry Council.
This Part shall be under the jurisdiction of National Technical Committee on Primary Battery
of Standardization Administration of China (SAC/TC 176).
Drafting organizations of this Part: Zhongyin (Ningbo) Battery Co., Ltd.; Sichuan Changhong
New Energy Technology Co., Ltd.; Guangzhou Tiger Head Battery Group Co., Ltd.; Fujian
Nanping Nanfu Battery Co., Ltd.; Institute of Chemical Power Sources for Light Industry;
Primary Batteries – Part 1: General
1 Scope
This Part of GB/T 8897 is intended to standardize primary batteries with respect to
electrochemical system, dimensions, nomenclature, terminal configurations, markings, test
methods, performance, reliability and environmental aspects. As a primary battery
classification tool, electrochemical systems are also standardized with respect to system letter,
electrodes, electrolyte, nominal and maximum open-circuit voltage.
This Part applies to batteries that meet the requirements of Annex A to ensure that batteries
produced by different manufacturers have standardized shape, fit and function.
2 Normative References
The following documents are essential to the application of this document. For the dated
documents, only the versions with the dates indicated are applicable to this document; for the
undated documents, only the latest version (including all the amendments) is applicable to this
document.
GB/T 8897.2-2021 Primary Batteries - Part 2: Physical and Electrical Specifications (IEC
60086-2:2015, MOD)
GB/T 8897.3-2021 Primary Batteries - Part 3: Watch Batteries (IEC 60086-3:2016, MOD)
3 Terms and Definitions
For the purposes of this document, the following terms and definitions apply.
3.1 Application test
Simulation of the actual use of a battery in a specific application.
3.2 Battery
One or more cells electrically connected and fitted in a case, with terminals, markings and
protective devices etc., as necessary for use.
NOTE: Rewrite IEC 60050-482:2004, definition 482-01-04.
3.3 Button cell or battery
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|