|
Std ID |
Description (Standard Title) |
|
GB/T 7032-1986
|
Method of bend test for T type fillet welded joint
|
|
GB/T 5185-1985
|
Welding, brazing, braze welding and soldering of metals--List of processes for symbolic representation on drawings
|
|
GB/T 5293-1985
|
Fluxes for the submerged arc welding of carbon steel
|
|
GB/T 984-1985
|
Covered electrodes for hardfacing
|
|
GB/T 4675.1-1984
|
Weldability testing Method of Y-groove cracking test
|
|
GB/T 4675.2-1984
|
Weldability testing--Method of controlled thermal severity cracking test
|
|
GB/T 4675.3-1984
|
Weldability testing--Method of cracking test for welded tee joint
|
|
GB/T 4675.4-1984
|
Weldability testing--Method of FISCO cracking test
|
|
GB/T 4675.5-1984
|
Weldability testing--Testing method of maximum hardness in weld heat-affected zone
|
|
GB/T 3669-1983
|
Coated electrodes for aluminum and aluminum alloys
|
|
GB/T 3731-1983
|
Covered electrodes--Determination of the efficiency, metal recovery and deposition coefficient
|
|
GB/T 2656-1981
|
Weld beads metal and welds--Fatigue tests
|
|
GB/T 1954-1980
|
Determination of the welding seam iron element content in chromium, nickel austenitic stainless steel
|
|
GB/T 15825.1-1995
|
Sheet metal formability and test methods--Formability and indexes
|
|
GB/T 15825.2-1995
|
Sheet metal formability and test methods--General test rules
|
|
GB/T 15825.3-1995
|
Sheet metal formability and test methods--Drawing and drawing load test
|
|
GB/T 15825.4-1995
|
Sheet metal formability and test methods--Hole expanding test
|
|
GB/T 15825.5-1995
|
Sheet metal formability and test methods--Bending test
|
|
GB/T 15825.6-1995
|
Sheet metal formability and test methods--Conical cup test
|
|
GB/T 15825.7-1995
|
Sheet metal formability and methods--Earing test
|
|
GB/T 15825.8-1995
|
Sheet metal formability and test methods--Forming limit diagram (FLD) test
|
|
GB/T 32151.51-2025
|
Requirements of the greenhouse gas emissions accounting and reporting - Part 51: Stamping enterprises
|
|
GB/T 45981.2-2025
|
Heavy casting and forging for heavy-duty gas turbine - Part 2: Superalloy die forgings
|
|
GB/T 45981.1-2025
|
Heavy casting and forging for heavy-duty gas turbine - Part 1: Steel open die forgings
|
|
GB/T 43919-2024
|
Integrating requirements of digital manufacturing workshop for civil aviation forgings
|
|
GB/T 44920-2024
|
Spinning process of large-curved tank bottom - Technological specification
|
|
GB/T 44948-2024
|
Sampling requirements and assessment for metal streamline of steel die forging parts
|
|
GB/T 32151.18-2024
|
Requirements of the greenhouse gas emissions accounting and reporting - Part 18: Forging enterprise
|
|
GB/T 45135-2024
|
Superplastic forming and diffusion bonding parts of titanium alloy sheet - General specifications
|
|
GB/T 20078-2023
|
Copper and copper alloys - Forgings
|
|
GB/T 42537-2023
|
Specification of heat treatment for super-scale steel forgings
|
|
GB/T 42602-2023
|
Specification of forging of heavy steel forgings
|
|
GB/T 43479-2023
|
Metal spinning formability and test methods - Formability, formability indexes and general test code of practice
|
|
GB/T 22131-2022
|
Practice for ultrasonic examination from bored surfaces of cylindrical forgings
|
|
GB/T 41857-2022
|
Sheet metal parts fabricated by fine blanking combined with extrusion process - General specification
|
|
GB/T 41859-2022
|
Sheet metal precise cold bending - Technical specification
|
|
GB/T 41982-2022
|
High alloy heat-resisting steel thick wall pipes and forgings used for power station - General specification
|
|
GB/T 42091-2022
|
Specification of smelting and casting of vacuum ingot for heavy steel forgings
|
|
GB/T 12363-2021
|
Classification of forging functions
|
|
GB/T 15055-2021
|
Permissible stamping variations in dimensions without tolerance indication
|
|
GB/T 40882-2021
|
Forgings of main pipes for nuclear power plant of generation III - Technological specification
|
|
GB/T 40883-2021
|
Micro alloyed steel forgings - General specification
|
|
GB/T 38958-2020
|
Wrought aluminum alloy precision forging--Technological specification
|
|
GB/T 38959-2020
|
Power spinning of high-strength steel--Technological specification
|
|
GB/T 38964-2020
|
Isothermal forging for titanium-alloy--Technological specification
|
|
GB/T 37057-2019
|
Multi-way precision die forgings - Quality control criterion
|
|
GB/T 37676-2019
|
High Speed Precision Hot Upsetting Forgings - Technological Specification
|
|
GB/T 37679-2019
|
Sheet Metal Parts Fabricated by Fine Blanking Combined with Extrusion Process - Technological Specification
|
|
GB/T 37683-2019
|
Large gear and girth gear forgings - Technical specification
|
|
GB/T 37400.8-2019
|
Heavy mechanical general technical specification -- Part 8: Forgings
|
|
GB/T 37775-2019
|
Heavy steel open die forgings - General technical specification
|
|
GB/T 38443-2019
|
GH4145 alloy bars and forgings - General specification
|
|
GB/T 35078-2018
|
High speed precision hot upsetting forgings -- General specification
|
|
GB/T 35079-2018
|
Multi-way precision die forgings -- Technological design principle
|
|
GB/T 35082-2018
|
Steel cold extrusion part - Technical specification
|
|
GB/T 35084-2018
|
Guidelines for environmental protection at press shop
|
|
GB/T 36961-2018
|
Hot stamping process for ultra-high strength steel -- General specification
|
|
GB/T 33522-2017
|
Carburizing Bearing Steel Forgings - Technical Specifications
|
|
GB/T 33878-2017
|
Steel cross wedge rolling -- Technological design principle
|
|
GB/T 33879-2017
|
Mufti-way precision die forgings -- General specification
|
|
GB/T 34356-2017
|
Flange forgings for low temperature service
|
|
GB/T 34358-2017
|
Dimension measurement of hot free forgings and rolled rings
|
|
GB/T 34359-2017
|
Deformed aluminum alloy precision forgings -- General specifications
|
|
GB/T 34360-2017
|
Compiling requirement of technological norm for stamping part material consumption
|
|
GB/T 12361-2016
|
Steel Die Forgings - General Specification
|
|
GB/T 12362-2016
|
Steel die forgings - Tolerance and machining allowance
|
|
GB/T 33083-2016
|
Heavy carbon structural steel forgings - Technical specification
|
|
GB/T 33084-2016
|
Heavy alloy structural steel forgings - Technical specification
|
|
GB/T 33201-2016
|
NCu30-3-0.5 Alloy Bar, Wire, Forgings and Forging Stock - General Specification
|
|
GB/T 33202-2016
|
Precision forgings of generator claw poles -- Technological design principle
|
|
GB/T 33211-2016
|
Guideline for design of metal tubular hydroforming part
|
|
GB/T 33212-2016
|
Steel Open Die Forgings on Hammer - General Specifications
|
|
GB/T 33216-2016
|
Steel Open Die Forgings on Hammer - Classification of Complexity and Equivalent Coefficient
|
|
GB/T 33217-2016
|
Burr height for stampings
|
|
GB/T 33220-2016
|
Copper-beryllium alloy forgings and extrusions -- General specification
|
|
GB/T 32258-2015
|
Steel cross wedge rolling -- General specification
|
|
GB/T 32246-2015
|
GH 141 alloy forgings -- General specification
|
|
GB/T 32248-2015
|
Superstrength alloy steel forgings -- General specifications
|
|
GB/T 32249-2015
|
Aluminum and aluminum-alloy die forgings, hand forgings and rolled ring forgings -- General specification
|
|
GB/T 32253-2015
|
Precision hot forging of straight bevel gear -- Structural design specification
|
|
GB/T 32254-2015
|
Precision hot forging of straight bevel gear -- General specifications
|
|
GB/T 32256-2015
|
Steel forgings for rings for reduction gears -- General specification
|
|
GB/T 30566-2014
|
GH4169 alloy bars, forgings and rings
|
|
GB/T 30567-2014
|
Technological design principle for steel precision hot forgings
|
|
GB/T 30568-2014
|
Zirconium and zirconium alloy forgings
|
|
GB/T 30569-2014
|
Structural design specification for precision cold forging of straight bevel gear
|
|
GB/T 30570-2014
|
Structural main factors of sheet metal stamping parts
|
|
GB/T 30571-2014
|
General specifications of sheet metal stamping parts
|
|
GB/T 30572-2014
|
Fine blanked parts -- Compiling rules of processes
|
|
GB/T 30573-2014
|
Fine blanked parts -- General technical requirements
|
|
GB/T 13914-2013
|
Tolerance of Dimensions for Stamping Parts
|
|
GB/T 13915-2013
|
Tolerance of angles for stamping parts
|
|
GB/T 13916-2013
|
Unnoted tolerance of shape and position for stamping parts
|
|
GB/T 29532-2013
|
General specification for steel precision hot die forgings
|
|
GB/T 29533-2013
|
Compiling method of technological norm for steel die forging material consumption
|
|
GB/T 29534-2013
|
General specifications of combined warm-cold forging parts
|
|
GB/T 29535-2013
|
Technological design principle for combined warm-cold forging process
|
|
GB/T 29536-2013
|
Testing method for the forming limit diagram (FLD) of metal tube
|
|
GB/T 28273-2012
|
Process classification of tube and sheet hydroforming
|
|
GB/T 8541-2012
|
Terminology of forging and stamping
|