GB/T 13916-2013 PDF English
US$70.00 · In stock · Download in 9 secondsGB/T 13916-2013: Unnoted tolerance of shape and position for stamping parts Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 13916: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 13916-2013 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Unnoted tolerance of shape and position for stamping parts
| Valid |
| GB/T 13916-2002 | English | 279 |
Add to Cart
|
3 days
|
Unnoted tolerance of shape and position for stampings
| Obsolete |
| GB/T 13916-1992 | English | 239 |
Add to Cart
|
2 days
|
Unnoted tolerance of shape and position for stampings
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 13916-2013
GB/T 13916-2013: Unnoted tolerance of shape and position for stamping parts---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT13916-2013
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 25.020
J 32
Replacing GB/T 13916-2002
Unnoted Tolerance of Shape and
Position for Stamping Parts
ISSUED ON: JUNE 9, 2013
IMPLEMENTED ON: MARCH 1, 2014
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Grade of Tolerance ... 4
3 Numerical Value of Tolerance ... 4
4 Representation Method for Adoption of this Standard ... 7
Foreword
This Standard was drafted in accordance with the rules in GB/T 1.1-2009.
This Standard serves as a replacement of GB/T 13916-2002 Unnoted Tolerance of
Shape and Position for Stampings. In comparison with GB/T 13916-2002, other than
editorial modifications, there are several main technical changes as follows:
---The English translation of the title of this Standard is modified (please refer to
the front cover; the front cover in Version 2002);
---The grade of tolerance is modified (please refer to Chapter 2; Chapter 2 in
Version 2002);
---Graphic annotation is modified (please refer to Figure 2 in 3.2; Figure 2 in
Version 2002);
---Unnoted tolerance of cylindricity is modified (please refer to 3.4; 3.4 in Version
2002);
---Unnoted tolerance of parallelism is modified (please refer to 3.5; 3.5 in Version
2002);
---A group of tolerance values is deleted (please refer to Grade-5 tolerance in 3.1
in Version 2002);
---The representation method for the adoption of this Standard is added (please
refer to Chapter 4).
This Standard was proposed by and shall be under the jurisdiction of National
Technical Committee 74 on Forging of Standardization Administration of China
(SAC/TC 74).
The drafting organization of this Standard: YTO (Luoyang) Flag Auto-body Co., Ltd.
The main drafters of this Standard: Dailu, Zhujing, Li Junying, Li Gaoxin.
The issuance of the previous versions of the standard being replaced by this Standard
is as follows:
---GB/T 13916-1992, GB/T 13916-2002.
Unnoted Tolerance of Shape and
Position for Stamping Parts
1 Scope
This Standard stipulates the unnoted tolerance grade and numerical value of
straightness, flatness, concentricity and symmetry for metal stamping parts; it also
stipulates the unnoted tolerance of roundness, cylindricity, parallelism, perpendicularity
and gradient for metal stamping parts.
This Standard is applicable to stamping parts for metal plates.
2 Grade of Tolerance
Unnoted tolerance of straightness, flatness, concentricity and symmetry for stamping
parts shall be divided into four grades, namely, f (fine), m (middle), c (coarse), v (very
coarse). Unnoted tolerance of roundness, cylindricity, parallelism, perpendicularity and
gradient for stamping parts shall not be divided into grades.
3 Numerical Value of Tolerance
3.1 Unnoted Tolerance of Straightness and Flatness
Unnoted tolerance of straightness and flatness shall comply with the stipulations in
Table 1. Unnoted tolerance of flatness shall select a longer side as the main parameter.
Please refer to Figure 1 for an example of the selection of the main parameters D, H
and L.
Table 1 -- Unnoted Tolerance of Straightness and Flatness
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
|