GB/T 32258-2015 PDF English
Search result: GB/T 32258-2015
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
GB/T 32258-2015 | English | 90 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Steel cross wedge rolling -- General specification
| Valid |
PDF Preview: GB/T 32258-2015
GB/T 32258-2015: PDF in English (GBT 32258-2015) GB/T 32258-2015
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.140.85
J 32
Steel cross wedge rollings - General specification
ISSUED ON. DECEMBER 10, 2015
IMPLEMENTED ON. JULY 1, 2016
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People’s Republic of China;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Requirements ... 5
4 Test methods ... 7
5 Inspection rules ... 8
6 Delivery conditions ... 8
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard was proposed by and shall be under the jurisdiction of the
National Technical Committee for Standardization of Forging and Pressing
(SAC/TC 74).
Drafting organizations of this Standard. USTB Jixiang Science and Technology
Co., Ltd, Hebei Dong’an Precision Manufacturing Co., Ltd, Beijing Research
Institute of Mechanical & Electrical Technology, and University of Science &
Technology Beijing.
Main drafters of this Standard. Zhang Jungai, Zhang Kangsheng, Jin Hong, Liu
Bo, Li Yu, Ren Rongwen and Chen Wenjing.
Steel cross wedge rollings - General specification
1 Scope
This Standard specifies the technical requirements, test methods, inspection
rules and delivery conditions of the steel cross wedge rollings.
This Standard is applicable to the hot-rolled steel parts produced on the cross
wedge rolling mills.
2 Normative references
The following documents are essential to the application of this document. For
dated references, only the editions with the dates indicated are applicable to
this document. For undated references, only the latest editions (including all the
amendments) are applicable to this document.
GB/T 226 Test method for macrostructure and defect of steel by etching
GB/T 231.1 Metallic materials - Brinell hardness test - Part 1. Test method
GB/T 699 Quality carbon structural steels
GB/T 700 Carbon structural steels
GB/T 702-2008 Hot-rolled steel bars - Dimensions, shape, weight and
tolerance
GB/T 1979 Grading diagrams for macrostructure and defect of structural
steels
GB/T 3077 Alloy structure steels
GB/T 4162 Forged and rolled steel bars - Method for ultrasonic testing
GB/T 5216 Structural steels with specified hardenability bands
GB/T 6394 Metal-methods for estimating the average grain size
GB/T 10561-2005 Steel - Determination of content of nonmetallic inclusions
- Micrographic method using standards diagrams
GB/T 13298 Inspection methods of microstructure for metals
3.2.8 Besides the requirements of Sections 3.2.1 to 3.2.7, the steels in use
can also be determined after consultation between supplier and demander.
3.3 Quality of the cross wedge rollings
3.3.1 Surface defects
3.3.1.1 The depths of the surface defects on the cross wedge rollings shall
not exceed 1/3 of the actual machining allowance. However, the creases and
cracks on the non-machined surfaces shall be cleaned away. The surfaces to
be cleaned shall be conducted with smooth transition. The grinding width shall
not be less than 6 times the depth. The length shall be 3mm above the defect
length at both ends. The grinding depth shall not exceed 1/3 of the actual
deviation.
3.3.1.2 The flaw detection of the surface cracks shall be conducted according
to GB/T 15822.
3.3.2 Internal quality
3.3.2.1 The ultrasonic flaw detection can be conducted according to GB/T
4162. The quality level shall be greater than or equal to Level B.
3.3.2.2 There shall be no over-burning, macroscopic cracks and visible holes.
3.3.2.3 The center porosity shall be less than or equal to Level 3, and shall be
evaluated according to GB/T 1979.
3.3.3 Heat treatment
3.3.3.1 General requirements
Heat treatment shall be carried out as required by the customer. The delivery
statuses of the heat treatment are as follows.
a) normalizing;
b) isothermal normalizing;
c) control cooling;
d) no heat treatment.
3.3.3.2 Hardness
The hardness shall be in accordance with JB/T 11761. If not specified in JB/T
11761, IMPLEMENT according to the following requirements.
...... Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|