|
Std ID |
Description (Standard Title) |
Detail |
|
GB 11554-2008
|
Photometric characteristics of rear fog lamp for power-driven vehicles and their trailers
|
GB 11554-2008
|
|
GB 11555-2009
|
Motor vehicles-windshield demisting and defrosting systems -- Performance requirements and test methods
|
GB 11555-2009
|
|
GB 11557-2011
|
The stipulation protecting drivers from being injured by motor vehicle steering mechanism
|
GB 11557-2011
|
|
GB 11562-2014
|
Motor vehicles -- Forward visibility for drivers -- Requirements and measurement methods
|
GB 11562-2014
|
|
GB 11566-2009
|
External projections for passenger car
|
GB 11566-2009
|
|
GB 12528.11-2003
|
Insulated cables (wires) for railway vehicles of rated voltages up to and including 3 kV Amendment 1: Cross-linked polyolefin insulated cables (wires) for railway vehicles
|
GB 12528.11-2003
|
|
GB 12981-2012
|
Motor vehicle brake fluids
|
GB 12981-2012
|
|
GB 13057-2014
|
The strength of the seats and their anchorages of passenger vehicles
|
GB 13057-2014
|
|
GB 14023-2011
|
Vehicles, boats and internal combustion engine -- Radio disturbance characteristics -- Limits and methods of measurement for the protection of off-board receivers
|
GB 14023-2011
|
|
GB 14166-2013
|
Safety-belts, restraint systems, child restraint systems and ISOFIX child restraint systems for occupants of power-driven vehicles
|
GB 14166-2013
|
|
GB 146.1-1983
|
Rolling stock gauge for standard gauge railways
|
GB 146.1-1983
|
|
GB 14681.2-2006
|
Electrically heated glazing materials for locomotives and ships - Part 2: Electrically heated glazing materials for locomotives
|
GB 14681.2-2006
|
|
GB 15082-2008
|
Speed meters for motor vehicle
|
GB 15082-2008
|
|
GB 15084-2013
|
Motor vehicles -- Devices for indirect vision -- Requirements of performance and installation
|
GB 15084-2013
|
|
GB 15085-2013
|
Motor vehicles - Windscreen wiper and washer systems - Performance requirements and test methods
|
GB 15085-2013
|
|
GB 15086-2013
|
Motor vehicle door locks and retention components performance requirements and test methods
|
GB 15086-2013
|
|
GB 15365-2008
|
Symbols for controls -- Indicators and tell tales for motorcycles and mopeds
|
GB 15365-2008
|
|
GB 1589-2016
|
Limits of dimensions, axle load and masses for motor vehicles, trailers and combination vehicles
|
GB 1589-2016
|
|
GB 17509-2008
|
Photometric characteristics of direction indicators for motor vehicles and their trailers
|
GB 17509-2008
|
|
GB 17675-1999
|
Steering system of motor vehicles. Basic requirements
|
GB 17675-1999
|
|
GB 17691-2005
|
Limits and measurement methods for exhaust pollutants from compression ignition and gas fuelled positive ignition engines of vehicles (III, IV, V)
|
GB 17691-2005
|
|
GB 17926-2009
|
[GB/T 17926-2009] Compressed natural gas cylinder valve for vehicle
|
GB 17926-2009
|
|
GB 17930-2013
|
Gasoline for motor vehicles
|
GB 17930-2013
|
|
GB 17930-2016
|
Gasoline for motor vehicles
|
GB 17930-2016
|
|
GB 18045-2000
|
Safety glass for railway rolling stock
|
GB 18045-2000
|
|
GB 18099-2013
|
Photometric characteristics of side-marker lamps for motor vehicles and their trailers
|
GB 18099-2013
|
|
GB 18296-2001
|
Safety property requirements and test methods for automobile fuel tank
|
GB 18296-2001
|
|
GB 18351-2015
|
Ethanol gasoline for motor vehicles (E10)
|
GB 18351-2015
|
|
GB 18408-2015
|
Photometric characteristics of devices for the illumination of rear registration plates of motor vehicles and their trailers
|
GB 18408-2015
|
|
GB 18409-2013
|
Photometric characteristics of parking lamps for power-driven vehicles
|
GB 18409-2013
|
|
GB 18565-2016
|
Composite performance requirement and detecting methods for road transport vehicles
|
GB 18565-2016
|
|
GB 19147-2016
|
[Including Amendment 2018XG1] Automobile diesel fuels
|
GB 19147-2016
|
|
GB 11234-2006
|
Uterine cavity form intra-uterine devices
|
GB 11234-2006
|
|
GB 11235-1989
|
V Cu Intrauterine device
|
GB 11235-1989
|
|
GB 11235-1997
|
VCu intra-uterine device
|
GB 11235-1997
|
|
GB 11235-2006
|
VCu intra-uterine devices
|
GB 11235-2006
|
|
GB 11236-1989
|
T Cu C intrauterine device
|
GB 11236-1989
|
|
GB 11236-1995
|
TCu intra-uterine devices
|
GB 11236-1995
|
|
GB 11236-2006
|
TCu intra-uterine devices
|
GB 11236-2006
|
|
GB 11237-1989
|
Stethoscope
|
GB 11237-1989
|
|
GB 11238-1989
|
Impression tonometers
|
GB 11238-1989
|
|
GB 11239.1-2005
|
Operation microscopes -- Part 1: Requirements and test methods
|
GB 11239.1-2005
|
|
GB 11239-1989
|
The operation microscope
|
GB 11239-1989
|
|
GB 11240-1989
|
Electrically-heated thermostatic water bath
|
GB 11240-1989
|
|
GB 11241-1989
|
Thermostatic water bath
|
GB 11241-1989
|
|
GB 1124-1985
|
Convex milling cutters
|
GB 1124-1985
|
|
GB 11242-1989
|
Baby incubator
|
GB 11242-1989
|
|
GB 11243-1989
|
Particular requirements for the safety of baby incubator
|
GB 11243-1989
|
|
GB 11243-2000
|
Medical electrical equipment Particular requirements for safety of baby incubators
|
GB 11243-2000
|
|
GB 11243-2008
|
Medical electrical equipment -- Part 2: Particular requirements for safety of baby incubators
|
GB 11243-2008
|
|
GB 11244-1989
|
General specifications for medical fiber endoscope
|
GB 11244-1989
|
|
GB 11244-2005
|
General requirements for the medical endoscope and endoscope accessories
|
GB 11244-2005
|
|
GB 11245-1989
|
Anaesthetic and respiratory equipment--Conical connectors--Cones and sockets
|
GB 11245-1989
|
|
GB 11246-1989
|
Specifications for continuous flow inhalational anaesthetic machines for use with humans
|
GB 11246-1989
|
|
GB 11247.1-1989
|
Stranded tungsten wire
|
GB 11247.1-1989
|
|
GB 11247.2-1989
|
Tungsten heater element
|
GB 11247.2-1989
|
|
GB 11248-1989
|
Dumet wire
|
GB 11248-1989
|
|
GB 11249-1989
|
Tungsten-deposited molybdenum target
|
GB 11249-1989
|
|
GB 1125-1985
|
Concave milling cutters
|
GB 1125-1985
|
|
GB 11255-1989
|
Grain oriented silicon steel strip
|
GB 11255-1989
|
|
GB 11257-1989
|
Grey cast iron fittings with rubber ring of ladder-lip-shaped
|
GB 11257-1989
|
|
GB 11258-1989
|
Double wall copper-brazed steel tubing
|
GB 11258-1989
|
|
GB 11260-1989
|
Cold-drawn round steel--Pass type eddy current testing method
|
GB 11260-1989
|
|
GB 1126-1985
|
T-slot cutter with morse taper shank
|
GB 1126-1985
|
|
GB 11262-1989
|
Hot rolled section for automobile wheel felloe
|
GB 11262-1989
|
|
GB 11267-1989
|
Chemical analysis methods for garnet
|
GB 11267-1989
|
|
GB 11268-1989
|
Chemical analysis methods for fused zirconia-alumina
|
GB 11268-1989
|
|
GB 11269-1989
|
Testing methods for the volume density, general porosity and water absorption of bonded abrasives
|
GB 11269-1989
|
|
GB 11271-1989
|
Diamond frame saw blades
|
GB 11271-1989
|
|
GB 1127-1981
|
Woodruff key-seat milling cutters
|
GB 1127-1981
|
|
GB 11272-1989
|
Diamond or cubic boron nitride sticks
|
GB 11272-1989
|
|
GB 11273-1989
|
Synthetic diamond or cubic boron nitride lapping paste
|
GB 11273-1989
|
|
GB 11274-1989
|
Pulp stone
|
GB 11274-1989
|
|
GB 11275-1989
|
Surface active agents--Determination of water content--Azeotropic distillation method
|
GB 11275-1989
|
|
GB 11280-1989
|
Detail specification for electronic components--Electromechanical all-or-nothing relays of assessed quality--Test schedules 3--Model JZC-21F DC electromagnetic relays
|
GB 11280-1989
|
|
GB 1128-1985
|
Inserted blade side milling cutters
|
GB 1128-1985
|
|
GB 11282.1-1989
|
B series pneumatic field mounted controllers--Level instrument
|
GB 11282.1-1989
|
|
GB 11282.2-1989
|
B series pneumatic field mounted controllers--Pressure instrument
|
GB 11282.2-1989
|
|
GB 11282.3-1989
|
B series pneumatic field mounted controllers--Temperature instrument
|
GB 11282.3-1989
|
|
GB 11282.4-1989
|
B series pneumatic field mounted controllers--Differential pressure instrument
|
GB 11282.4-1989
|
|
GB 11282.5-1989
|
B series pneumatic field mounted controllers--3-pens recording instrument
|
GB 11282.5-1989
|
|
GB 11283-1989
|
The characteristic parameter of a diffuse reflective projection screen
|
GB 11283-1989
|
|
GB 11284-1989
|
The characteristic parameter of a collective gain reflective projection screen
|
GB 11284-1989
|
|
GB 11285-1989
|
Installation of a collective gain reflective projection screen
|
GB 11285-1989
|
|
GB 11286-1989
|
Measurement of sound attenuation through a perforated reflective projection screen
|
GB 11286-1989
|
|
GB 11288-1989
|
Under-excitation impedance protection equipment for generator
|
GB 11288-1989
|
|
GB 11289-1989
|
Protection equipment of generator stator earthing
|
GB 11289-1989
|
|
GB 11290-1989
|
Specification for fault oscillograph panel
|
GB 11290-1989
|
|
GB 11291.1-2011
|
Robots for industrial environments -- Safety requirements -- Part 1: Robot
|
GB 11291.1-2011
|
|
GB 11291.2-2013
|
Robots and robotic devices -- Safety requirements for industrial robots -- Part 2: Robot systems and integration
|
GB 11291.2-2013
|
|
GB 11291-1989
|
Industrial robots--Safety specification
|
GB 11291-1989
|
|
GB 11291-1997
|
Industrial robots--Safety specification
|
GB 11291-1997
|
|
GB 1129-1985
|
Inserted blade face milling cutters
|
GB 1129-1985
|
|
GB 11294-1989
|
Commonly used terms for semiconductor photoelectric materials and pyroelectric materials in infrared detecting materials
|
GB 11294-1989
|
|
GB 1130-1985
|
Hss wedge type serrated for side and face milling cutters
|
GB 1130-1985
|
|
GB 11307-1989
|
Detail specification for electronic components--Fixed capacitors of ceramic dielectric, type CS1--Assessment level E
|
GB 11307-1989
|
|
GB 11308-1989
|
Detail specification for electronic components--Fixed polyester-polypropylene film dielectric metal foil D. C capacitors, type CH11--Assessment level E
|
GB 11308-1989
|
|
GB 11313-1989
|
Radio-frequency coaxial connectors--Generic specification of
|
GB 11313-1989
|
|
GB 11314-1989
|
R. F coaxial connectors of type N
|
GB 11314-1989
|
|
GB 11315-1989
|
R. F coaxial connectors of type BNC
|
GB 11315-1989
|