How long will the true-PDF of English version of GB 30003-2013 be delivered?

Upon your order, we will start to translate GB 30003-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Can I share the purchased PDF of GB 30003-2013_English with my colleagues?

Yes. The purchased PDF of GB 30003-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Does the price include tax/VAT?

Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries). Avoidance of Double Taxation Agreements (DTAs) between Singapore and 100+ Countries: https://www.iras.gov.sg/taxes/international-tax

Do you accept my currency other than USD?

Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Path: Home > GB > Page9 > GB 30003-2013 Home > Standard_List > GB > Page9 > GB 30003-2013

GB 30003-2013 English PDF

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
GB 30003-2013	English	439	Add to Cart	3 days [Need to translate]	Toothbrushes with tapered filament	Obsolete	GB 30003-2013

PDF similar to GB 30003-2013

Standard similar to GB 30003-2013

GB/T 30002 GB 28477 GB 31892 GB/T 30002 GB 30002 GB/T 10810.1

Basic data

Standard ID	GB 30003-2013 (GB30003-2013)
Description (Translated English)	Toothbrushes with tapered filament
Sector / Industry	National Standard
Classification of Chinese Standard	Y89
Classification of International Standard	11.060.20
Word Count Estimation	11,174
Quoted Standard	GB/T 191; GB/T 2828.1-2012; GB/T 2829-2002; GB/T 6682-2008; GB 19342-2013; GB 30002-2013
Regulation (derived from)	National Standards Bulletin No. 20 of 2013
Issuing agency(ies)	General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary	This standard specifies: wire sharpened toothbrush terms and definitions, product classification, requirements, test methods, inspection rules, marking, packaging, transportation and storage. This standard applies to: adults, children hand tufting all or

GB 30003-2013: Toothbrushes with tapered filament

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Toothbrushes with tapered filament ICS 11.060.20 Y89 National Standards of People's Republic of China Toothbrush sharp silk mill Issued on. 2013-10-10 2014-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard 5.1,5.2,5.5,5.6,5.7 (Table 5 items 1,3,5) are mandatory, the rest are recommended. This standard was drafted in accordance with GB/T 1.1-2009 given rules. Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents. The standard proposed by China National Light Industry Council. The standard oral care products by the National Technical Committee of Standardization Technical Committee toothbrush (SAC/TC492/SC2) centralized. This standard was drafted. Cixi Jie Dana Mi Composite Materials Co., Wuxi Xingda Nylon Co., Ltd., Beijing Light Industrial Products A Quality Supervision, Inspection Station, Jiangsu Five Love Group Co., Ltd. Yangzhou Star Toothbrush, Colgate smile, Ltd., Jiangsu Prosperity brush Co., Ltd., Guangdong Limited supplies of clean snow, good to Chemical (Zhongshan) Co., Procter & Gamble (China) Co., Ltd., Yangzhou Jin Bali Brush Co., Ltd., Yangzhou Jinxia Plastic Co., Ltd., Yangzhou morning Brush Co., Ltd., Jiang Su Chenjie Japan Ltd., two needles (Yangzhou) Hotels Ltd. Lion Daily Chemical (Qingdao) Co., Ltd., Jiangsu three laugh Group Co., Ltd. and Guangdong Law of the Limited. The main drafters of this standard. Yin Shin, and Lee Chuan, Ma Jianbo, Yang Zhao Jin, Zhang Wensheng, Xiao Qing, Shengda Ming, Li Duan Yi, Gu Ming, Huang Yikang, Chen Xinglong, Tu Jinxiang, Wang Jinyan, Song, Lan Jin, Liu Jing, Wu Hengyou, Wei Xiaoying, Wang Xin Yao, Baoqin, FII have. Toothbrush sharp silk mill

1 Scope

This standard specifies the terms and definitions sharpened toothbrush filaments, product classification, requirements, test methods, inspection rules, marking, packaging, transportation, Storage. This standard applies to adults, children, hand tufting all or part of the conical wire brush toothbrush.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 191 Packaging - Pictorial signs GB/T 2828.1-2012 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample plan GB/T 2829-2002 periodic inspection Sampling procedures and sample forms (suitable for process stability test) Laboratory use specifications and test methods GB/T 6682-2008 Analysis GB 19342-2013 toothbrush GB 30002-2013 children's toothbrushes

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 Sharp silk mill taperedfilament Wire brush tip conically shaped bristles.

4 Products

Size divided by adult toothbrush, children toothbrush.

5 Requirements

5.1 health requirements 5.1.1 bristle brush handle, brush head should not be bleaching. 5.1.2 toothbrush all parts should be clean, no dirt, no smell. 5.1.3 product sales due Packaging, inside and outside should be clean and free of dirt, cracking. 5.1.4 sharp silk mill pH5.5 ~ 8.0. 5.2 Safety Requirements 5.2.1 toothbrush head shape should be smooth (except for special process), no sharp edges, no glitches. The handle tail shapes should not cause injury. 5.2.2 harmful elements. Element Product any soluble compound soluble antimony, arsenic, barium, cadmium, chromium, lead, mercury, selenium, or elements of these Su content must not exceed the values in Table 1. Table 1 milligrams per kilogram Element Name (Sb) (As) (Ba) (Cd) (Cr) (Pb) (Hg) (Se) Content 6,025,100,075,609,060,500 5.3 Size Size (see Figure 1) shall comply with the requirements in Table 2. figure 1 Table 2 millimeters No. Item Claim Adult toothbrush children's toothbrush 1 matte side length (A) ≤42.0 ≤29.0 2 hair surface width (B) ≤14.0 ≤11.0 3 brush thickness (C) ≤7.0 ≤6.0 4 bristle height (D) 8.0 ~ 14.0 7.0 ~ 12.0 5 filament diameter (φ) ≤0.35 ≤0.18 Toothbrush 6 full-length a (L) ≥150.0 110.0 ~ 180.0 Except for a special purpose toothbrush. 5.4 tuft strength classification 5.4.1 tufts strength classification and nominal wire diameter should be expressed on the product packaging. 5.4.2 tuft strength classification shall comply with the requirements of Table 3 or Table 4. table 3 Tuft strength classification Tufts bending force (F) Soft F < 6 5 \u003cF\u003c8 Hard F > 7 NOTE. tufts bending force portion dispensing toothbrush to remove the glue injection test section. Table 4 Tuft strength classification Nominal wire diameter size (φ) mm Soft φ≤0.18 The 0.18≤φ≤0.22 Hard 0.22≤φ≤0.35 5.5 sharp silk mill 5.5.1 sharp silk mill at the end of the wire diameter (φ) should be less than equal to 0.08mm. 5.5.2 cone height of not less than 4mm. 5.5.3 sharpening rate should be greater than or equal to 90%. 5.6 non-sharpened wire brush portion Product Central African sharpened wire bristle part monofilament bending recovery rate should be consistent with GB 19342-2013 Table 5 in the first five requirements, adult toothbrush Non-sharpened portion of the bristles should be consistent with GB 19342-2013 sanding requirements in 4.6, children toothbrush bristles brushed non-sharpened portion should be consistent GB 30002-2013 in 4.6 requirements. 5.7 Physical properties The physical properties should meet the requirements of Table 5. table 5 No. Item Claim Adult toothbrush children's toothbrush 1 tuft pull/N ≥15 2 shank bending force/N ≥80 or within the deformation within the limits constantly ≥60 or deformation continuously limits 3 neck bending force/N ≥43 or within the deformation within the limits constantly ≥25 or deformation continuously limits 4 heat resistance (50 ± 2) ℃ water soak 20min without exception 5 monofilament bending recovery rate /% ≥60 5.8 appearance quality Appearance quality should be consistent with the requirements in Table 6. Table 6 No. Item Requirements 1 bristle neat, straight, empty tufts full appropriate 2 pores crack is not allowed to crack the head edge, back split wear

3 brush handle

Sleek, does not allow visible impurities, and cracks larger than 1mm2 bubbles (bubble transparent handle only concerned, Except technology bubble) and other defects

6 Test methods

6.1 health requirements 6.1.1 Decoloration test. fully saturated cotton 65% ethanol, respectively, in the brush, brush handle, firmly wipe back and forth 100 times on the bristles, head Is there a color on the test observation cotton. 6.1.2 Visually inspect all parts of the toothbrush are clean and free of dirt, with the sense of smell to determine whether the odor. 6.1.3 Are there visual product sales packaging, the packaging is cracking, whether inside and outside the packaging clean and free of dirt. Unit sales of the product packaging Check with the bristles are not directly touch the hand is qualified. 6.1.4 pH test method in Appendix A. 6.2 Safety Requirements 6.2.1 toothbrush head and tail of the handle from the toothbrush 300mm visually under natural light or light 40W, with hand inspection. 6.2.2 harmful elements according to GB 19342-2013 Appendix A test method specified. 6.3 Size Size respectively minimum scale value of 0.02mm vernier caliper, micrometer outer diameter of 0.01mm, 0.5mm into the ruler Line measurement. 6.4 tuft strength classification 6.4.1 visually express whether on the product packaging. 6.4.2 tuft to tuft strength classification bending force assessment, according to GB 19342-2013 test method in Appendix B; 6.4.3 tuft strength disaggregated by express nominal wire diameter evaluated. 6.4.4 such as tufts strength classification evaluation results of dispute, according to GB 19342-2013 Appendix B method for arbitration. 6.5 sharp silk mill 6.5.1 on a toothbrush, either take 10 wire brush, paste on paper, sharpened wire from the wire to the top end of the wire diameter of 0.5mm with a minimum at the points Degree is under 0.001mm microscope measurements. Simultaneous measurement of the height of the cone. Each toothbrush over a wire brush or does not comply with 5.5.1 5.5.2 requires determination of the toothbrush failed. 6.5.2 sharp silk mill in line with the requirements specified in 5.5.1 and 5.5.2 for the qualified wire brush sharpened. Sharpening rate according to equation (1) testing. η (%) = m × 100 (1) Where. η --- sharpened rate,%; n --- sharpened number of qualified; m --- Total number of sharpened wire. 6.6 non-sharpened wire brush portion Products of non-sharpened wire bristle part monofilament bending recovery rate according to GB 19342-2013 test method specified in 5.5.5, non-product Sharpened wire brush sanding part by GB 19342-2013 test method specified in 5.6. 6.7 Physical properties 6.7.1 tuft Rally 5.5.1 according to the method specified in GB 19342-2013 test. 6.7.2 shank buckling force The method of testing adult toothbrush handle portion flexural strength according to GB 19342-2013 specified in 5.5.2, a children's toothbrush according to GB 30002-2013 The method of testing specified in 5.5.2. 6.7.3 neck bending force Adult toothbrush neck bending force by the method specified in 5.5.3 of GB 19342-2013 test, children's toothbrushes according to GB 30002-2013 The method of testing specified in 5.5.3. 6.7.4 heat resistance 5.5.4 according to the method specified in GB 19342-2013 test. 6.7.5 monofilament bending recovery rate 5.5.5 according to the method specified in GB 19342-2013 test. 6.8 appearance quality 5.7 according to the method specified in GB 19342-2013 tested.

7 Inspection rules

7.1 Inspection classification Inspection is divided into the factory inspection and type testing. 7.2 factory inspection 7.2.1 Where the proposed delivery of the product, the factory inspection should be carried out. Product shall be subject to quality inspection department of the production plant according to the standard rear inspection Can Factory, together with passing inspection logo. 7.2.2 factory inspection according to GB/T 2828.1-2012 provisions, special inspection level S-3 is normally checked a sampling program, Its test items, requirements, test methods, acceptance quality limit AQL values in Table 7. Table 7 Test item number requirements, test methods AQL value 1 sharpening rate 5.5.3 6.5.2 2 appearance quality 5.8 6.8 2.5 7.2.3 If the factory inspection as unqualified batches, you can double the sample from the batch in nonconforming items recheck, as there is a re-examination is still Fail, then determine whether the product is defective. The batch of products should be reworked only after inspection. 7.3 Type inspection 7.3.1 There should be one of the following types of testing. a) new products or old products to the plant when the trial to identify stereotypes; B) after the official production, such as structure, materials, technology has drastically changed, it may affect product performance; C) When the normal production of bulk product sampling inspection, at least once a year; d) Product Discontinuance more than six months, the production recovery; e) factory inspection results are quite different when the last type inspection; f) the national quality supervision and inspection agencies when type inspection requirements. 7.3.2 Type test sample should be drawn 18 inspection, evaluation type test to fail count after qualifying in batch factory inspection Calculations. 7.3.3 type test according to GB/T 2829-2002 provisions, determined using level I of a sampling program. Inspection items, requirements, Test methods, failure classification, substandard quality level (RQL values), the number of samples, determined the array shown in Table 8. Table 8 Test item number requirements, test methods substandard classification RQL value samples Determination array Ac Re

1 health requirements

5.1.1 5.1.2 5.1.3 6.1.1 6.1.2 6.1.3 2 5.2.1 6.2.1 Safety requirements 3 sharp silk mill 5.5 6.5 4 non-sharpened wire brush portion 5.6 6.6 Physical properties 5 5.7 6.7 B 40 5 1 2 Size 5.3 6.3 6 7 appearance quality 5.8 6.8 C 65 3 1 2 7.3.4 pH should meet the requirements of 5.1.4, otherwise determined to be defective; harmful elements should meet the requirements of 5.2.2, otherwise judged to be not qualified. 7.3.5 tuft strength test sample 5, and match three or more data and express strength, determined to be qualified, otherwise judged to be unqualified. 7.3.6 there is a failure is determined that the type test failed. 8 signs, packaging, transportation and storage 8.1 mark 8.1.1 Product sales unit should be marked with the Chinese on the package the following contents. a) the product name; b) production plant name and address; c) implementation of standard number; d) tuft strength category; e) nominal wire diameter; f) identification of product quality inspection. 8.1.2 Chinese product box should have the following contents. a) the product name; b) production plant name and address; c) type; d) number; e) length × width × height. 8.2 Packaging Product box should be solid, no damage, storage box on the sign shall comply with GB/T 191's. 8.3 Transport Product handling when you want to handle it gently to prevent rain and stress. 8.4 Storage The product should be stored in dry, ventilated warehouse.

Appendix A

(Normative) Sharp silk mill pH test method A.1 Principle PH was measured using a pH meter on sharp silk mill acid residue was dissolved in water after. A.2 Reagents A.2.1 test water should meet GB/T 6682-2008 analytical laboratory three water wherein the conductivity of less than or equal 14μS / cm, with pre-boiled cooled. A.2.2 buffer solution. select two kinds of samples expected to be close to the pH buffer solution pH meter calibration, the buffer solution with water (A.2.1) formulated. A.3 test device A.3.1 pH meter. glass electrode, calomel electrode or composite electrode, minimum scale value of 0.02. A.3.2 conical flask. 100mL. A.3.3 glass rod. A.3.4 Balance. minimum scale value is 0.0001g. A.4 Test conditions (20 ± 2) ℃. A.5 Test procedure In the clip root sharpened toothbrush bristle filaments, weighed 2.0g placed in 100mL Erlenmeyer flask was poured into 50mL of deionized water (A.2.1), all Even after stirring 2min, at (20 ± 2) ℃ conditions stand 5min ~ 10min, and then test the pH of the solution. A.6 expression analysis pH results represent the average value of two measurements, accurate to 0.1. A.7 accuracy The difference between two measurements of the pH should be less than or equal to 0.1. 3102- Rights Proprietary Rights Reserved ISBN. 155 066 · 1-47671