|
Std ID |
Description (Standard Title) |
|
GB/T 5924-1986
|
Test values and classification of fuel filters for automotive compression ignition engines
|
|
GB/T 34595-2017
|
The technical specifications for remanufacturing of automotive components -- Water pump
|
|
GB/T 34596-2017
|
The technical specification for remanufacturing of automotive components - Oil pumps
|
|
GB/T 28954-2012
|
Automotive engines -- Spin-on filters for lubricating oil -- Connect dimensions
|
|
GB/T 28955-2012
|
Road vehicles -- Filter elements for full flow oil filters -- Dimensions
|
|
GB/T 18377-2001
|
Requirements and measurement methods of catalytic converters for petrol vehicles
|
|
GB/T 12542-1990
|
Motor vehicles--Cooling capacity for engine cooling system--Test method on road
|
|
GB/T 35358.1-2017
|
Inlet air cleaning equipment for vehicle engines and compressors -- Part 1: Fractional efficiency testing with fine particles (0.3 μm to 5 μm optical diameter)
|
|
GB/T 35358.2-2017
|
Inlet air cleaning equipment for vehicle engines and compressors -- Part 2: Fractional efficiency testing with coarse particles (5 μm to 40 μm optical diameter)
|
|
GB/T 35363-2017
|
Diesel fuel and petrol filters for vehicle engines -- The test method for filtration efficiency and contaminant retention capacity -- Method of particle counting
|
|
GB/T 43947-2024
|
General technical requirements for chassis-by-wire of low speed automated vehicle
|
|
GB/T 39037.1-2021
|
Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships - General requirements - Part 1: Commercial vehicles and combinations of vehicles, semi-trailers excluded
|
|
GB/T 34622-2017
|
Protective Devices Against Unauthorized Use for All-terrain Vehicles
|
|
GB/T 26780-2011
|
The safety requirement of fuel system for compressed natural gas vehicle in the collision
|
|
GB/T 26988-2011
|
Marks for recoverability of automobile parts
|
|
GB/T 26989-2011
|
Automobile Recovery - Terminology
|
|
GB/T 44622-2024
|
Transmission flanges for commercial vehicles - Types A, S and T
|
|
GB/T 29307-2012
|
The reliability test methods of drive motor system for electric vehicles
|
|
GB/T 13049-1991
|
Motor vehiles--Hydrodynamic torque converter--The specifications
|
|
GB/T 13051-1991
|
Motor vehicles--Connections for PTO
|
|
GB/T 7680-1987
|
Hydrodynamic torque converter--Methods of performance tests
|
|
GB/T 15704-2025
|
Road vehicles - Light alloy wheels - Impact test method
|
|
GB/T 2933-2025
|
Vocabulary, designation and marking of wheels and rims for pneumatic tyres
|
|
GB/T 4095-2025
|
Mounting dimensions of disc wheels on hubs for commercial vehicles
|
|
GB/T 45144-2024
|
Road vehicles - Wheels and rims - Use, general maintenance and safety requirements and out-of-service conditions
|
|
GB/T 5334-2021
|
Passenger car - Wheels - Performance requirements and test methods for cornering and radial fatigue
|
|
GB/T 5909-2021
|
Commercial vehicles - Wheels - Performance requirements and test methods for cornering and radial fatigue
|
|
GB/T 13061-2017
|
Technical specification of air spring used for air suspension of commercial vehicle
|
|
GB/T 34591-2017
|
Terms of air suspension for commercial vehicle
|
|
GB/T 35180-2017
|
Technical specifications for rubber bushing used for torque rod of air suspension for commercial vehicle
|
|
GB/T 15704-2012
|
Road vehicles -- Light alloy wheels -- Impact test procedure
|
|
GB/T 2933-2009
|
Wheels and rims for pneumatic tyres -- Vocabulary, designation and marking
|
|
GB/T 5909-2009
|
Performance requirements and test methods of commercial vehicles wheels
|
|
GB/T 4095-2005
|
Disc wheels for trucks -- Dimensional characteristics of attachment on hub
|
|
GB/T 5334-2005
|
Performance requirements and test methods of passenger car wheels
|
|
GB/T 17351-1998
|
Dual spacing of vechicle wheels
|
|
GB/T 3487-1996
|
Rim contours for motor vehicles
|
|
GB/T 2933-1995
|
Wheels/rims for pneumatic tyres--Nomenclature, designation and marking
|
|
GB/T 5909-1995
|
Performance requirements and test methods of truck wheels
|
|
GB/T 15087-1994
|
Motor vehicles-Drawbar couplings and eyes for hinged drawbars-Strength test
|
|
GB/T 15088-1994
|
Motor vehicles-Fifth wheel coupling pins-Strength test
|
|
GB/T 14687-1993
|
Industrial wheels
|
|
GB/T 13061-1991
|
Air spring for automotive suspension. Rubber bellows
|
|
GB/T 5334-1995
|
Performance requirements and test methods of passenger car steel wheels
|
|
GB/T 45829-2025
|
Funtional safety requirements and testing methods for passenger car steering system
|
|
GB/T 44084-2024
|
Weave test and transition test methods for the on-centre handling of heavy commercial vehicle
|
|
GB/T 17346-2023
|
Test methods of automobile pedal position dimensions
|
|
GB/T 41600-2022
|
Straight-line driving stability test procedure for automobile
|
|
GB/T 40507-2021
|
Passenger cars - Free-steer behaviour - Steering-pulse open-loop test method
|
|
GB/T 40509-2021
|
Test method of transition test for the quantification of vehicle on-centre handling
|
|
GB/T 35360-2017
|
Motor vehicles steering system terms and definitions
|
|
GB/T 6323-2014
|
Controllability and Stability Test Procedure for Automobile
|
|
GB/T 12549-2013
|
Terms and definitions for vehicle controllability and stability
|
|
GB/T 4970-2009
|
Method of running test -- Automotive ride comfort
|
|
GB/T 4971-2009
|
Terms and definitions for Automotive ride comfort
|
|
GB/T 21055-2007
|
Assistive devices of car manipulation for persons with physical disabilities
|
|
GB/T 4782-2001
|
Road vehicles -- Controls, indicators and tell-tales -- Vocabulary
|
|
GB/T 17867-1999
|
Passenger cars. Location of hand controls，indicators and tell-tales
|
|
GB/T 17346-1998
|
Passenger cars. Lateral spacing of foot controls
|
|
GB/T 13604-1992
|
Motor vehicles--Steering ball joints--Dimensions
|
|
GB/T 13047-1991
|
Criterion thresholde and evaluation of controllability and stability for automobiles
|
|
GB/T 13594-2025
|
Performance requirements and test methods of anti-lock braking system for commercial vehicle and trailer
|
|
GB/T 31970-2025
|
Performance requirements and bench test methods for air brake caliper assemblies of vehicles
|
|
GB/T 46161.1-2025
|
Road vehicles - Pneumatic braking systems - Part 1: Pipes, male fittings and tapped holes with facial sealing surface
|
|
GB/T 46161.2-2025
|
Road vehicles - Pneumatic braking systems - Part 2: Pipes, male fittings and tapped holes with conical sealing surface
|
|
GB/T 24926-2024
|
Performance and measurement method for braking of all-terrain vehicles
|
|
GB/T 44123-2024
|
Test methods of hydraulic braking systems for motor vehicles
|
|
GB/T 44126.2-2024
|
Road vehicles - Test of braking systems on vehicles with a maximum authorized total mass of over 3.5 t using a roller brake tester - Part 2: Air over hydraulic and purely hydraulic braking systems
|
|
GB/T 44128-2024
|
Road vehicles - Braking threshold pressures for heavy commercial vehicle combinations with fully pneumatic braking systems - Test with roller brake tester
|
|
GB/T 44287-2024
|
Performance requirement and testing methods for electronic braking system(EBS) of commercial vehicles
|
|
GB/T 45146-2024
|
Road vehicles - Air and air/hydraulic braking systems of motor vehicles test procedures
|
|
GB/T 45147-2024
|
Road vehicles - Test of vehicle air braking systems with a permissible mass of over 3.5t - Acquisition and use of reference values using a roller brake tester
|
|
GB/T 39901-2021
|
Performance requirements and test methods for advanced emergency braking system (AEBS) of passenger cars
|
|
GB/T 5620-2020
|
Road vehicles - Vocabulary and definition for braking of automotive vehicles and their trailers
|
|
GB/T 37336-2019
|
Brake drum of automobile
|
|
GB/T 38185-2019
|
Performance requirements and testing methods for electronic stability control system (ESC) for commercial vehicles
|
|
GB/T 38186-2019
|
Performance requirements and test methods for advanced emergency braking system (AEBS) of commercial vehicles
|
|
GB/T 5345-2019
|
Road vehicles - Labelling of containers for petroleum-based or non-petroleum-based brake fluid
|
|
GB/T 36048-2018
|
Passenger Cars Physical Layer Technical Specification of CAN Bus
|
|
GB/T 18274-2017
|
Technical Specifications for Motor Vehicle Brake System
|
|
GB/T 34422-2017
|
Brake disc for automobile
|
|
GB/T 34588-2017
|
Heavy commercial vehicles -- Braking in a turn -- Open-loop test methods
|
|
GB/T 34597-2017
|
Passenger cars -- Stopping distance at straight-line braking with ABS -- Open loop test method
|
|
GB/T 32692-2016
|
Performance test methods for endurance braking systems of commercial vehicles
|
|
GB/T 31970-2015
|
Performance Requirements and Bench Test Methods for Air Brake Caliper Assemble of Automobile
|
|
GB/T 5921-2015
|
Motor vehicles and towed vehicles -- Air braking systems -- Identification of connections on units
|
|
GB/T 32086-2015
|
Requirement of vertical flammability characteristic and test method for certain category automobile interior material
|
|
GB/T 30513-2014
|
Technical requirements and testing method of tire blow-out monitoring and controlling system for passenger car
|
|
GB/T 30677-2014
|
Performance requirements and testing methods for electronic stability control system (ESC) for light vehicles
|
|
GB/T 5335-2008
|
Automobile pressure test connection for hydraulic braking equipment
|
|
GB/T 5345-2008
|
Road vehicle -- Labelling of containers for petroleum-based or non-petroleum-based brake fluid
|
|
GB/T 5922-2008
|
[Including 2019XG1] Motor vehicles and towed vehicles -- Pressure test connection for compressed-air pneumatic braking equipment
|
|
GB/T 13594-2003
|
Antilock braking performance and test procedure for motor vehicles and their trailers
|
|
GB/T 5620-2002
|
Road vehicles -- Braking of automotive vehicles and their trailers -- Vocabulary
|
|
GB/T 18274-2000
|
Technical specifications for motor vehicle drum brake being overhauled
|
|
GB/T 14171-1993
|
Motor vehicles. Pneumatic brakingsystems. Tapped holes and male fittings
|
|
GB/T 12780-1991
|
Trucks and buses--Brake--Bench test methods
|
|
GB/T 11609-1989
|
Motor vehicles--Brake linings resistance to water, saline solution, oil and brake fluid--Test procedure
|
|
GB/T 11610-1989
|
Motor vehicles--Brake linings--Internal shear strength of lining material--Test procedure
|
|
GB/T 11611-1989
|
Motor vehicles--Hydraulic braking systems--Pipes, tapped holes, male fittings and hose end fittings
|