|
US$519.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 34588-2017: Heavy commercial vehicles -- Braking in a turn -- Open-loop test methods
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 34588-2017 | English | 519 |
Add to Cart
|
5 days [Need to translate]
|
Heavy commercial vehicles -- Braking in a turn -- Open-loop test methods
| Valid |
GB/T 34588-2017
|
PDF similar to GB/T 34588-2017
Basic data | Standard ID | GB/T 34588-2017 (GB/T34588-2017) | | Description (Translated English) | Heavy commercial vehicles -- Braking in a turn -- Open-loop test methods | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | T24 | | Classification of International Standard | 43.040.40 | | Word Count Estimation | 26,297 | | Date of Issue | 2017-10-14 | | Date of Implementation | 2018-07-01 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 34588-2017: Heavy commercial vehicles -- Braking in a turn -- Open-loop test methods---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Heavy commercial vehicles - Braking in a turn - Open-loop test methods
ICS 43.040.40
T24
National Standards of People's Republic of China
Test Method of Open Brake Rotation in Heavy Commercial Vehicles
(ISO 14794.2011, Heavy commercial films and buses-
Brakinginaturn-Open-looptestmethods, MOD)
2017-10-14 Published
2018-07-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Directory
Foreword Ⅲ
Introduction IV
1 Scope 1
2 Normative references 1
3 General 1
4 reference system 1
5 Measurement variables 1
6 test equipment and equipment 2
7 Test conditions 2
8 Test Method 3
9 Test data processing and test result expression 4
Appendix A (Normative) Test Report --- General data and test conditions 8
Appendix B (Normative) Test Report --- Test Curve 9
References 21
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard uses the redrafted law Amendment uses ISO 14794.2003 "heavy commercial vehicles and passenger car turning brake open-loop test side
law".
This standard ISO 14794.2011 compared to the technical differences and the reasons are as follows.
--- On the normative references, this standard made a technical difference with the adjustment to adapt to China's technical conditions, adjust the situation
Concentration reflected in the second chapter "Normative references", the specific adjustments are as follows.
● Replace ISO 3833 (see Chapter 1) with GB/T 15089-2001 "Motor vehicles and trailer classification", ISO 3833
Type classification, GB/T 15089-2001 by vehicle type and total mass classification, easier for standard users.
Please note that this document may be patentable. The issuing agencies of this document do not bear the responsibility of identifying these patents.
This standard is proposed by the National Development and Reform Commission of the People's Republic of China.
This standard by the National Automotive Standardization Technical Committee (SAC/TC114) centralized.
This standard drafting unit.China First Automobile Co., Ltd. Technical Center, the National Automobile Quality Supervision and Inspection Center (Changchun).
The main drafters of this standard. Yi Yong, Chen Hai, Liang Jinke, Wang Jinsong, Wang Yanjun.
Introduction
The main purpose of this standard is to provide repeatable and differentiated test results.
The dynamic performance of road vehicles is an important aspect of vehicle active safety. Any particular vehicle with its driver and related environment
Together form a specific closed-loop system. Since there is a significant interaction between the driver-vehicle-environment elements, each element alone
Is complicated, therefore, the task of evaluating the dynamic characteristics of a vehicle becomes very difficult. A complete and accurate description of the characteristics of the road vehicle must be available
A series of information from different types of tests should be included.
Since these tests quantify only a small part of the overall handling characteristics of the vehicle, the results of these tests are only valid for the entire dynamic behavior
A small part of the features makes sense.
In addition, in the absence of sufficient knowledge of the relationship between the overall dynamics of the vehicle and the avoidance of accidents, in order to obtain the usual avoidance of accidents
Adequate and reliable data on the correlation with the dynamics of the vehicle, as well as the results of these tests in exceptional circumstances, and a great deal of work
It needs to be done. As such, the test method used for regulatory purposes will require proof of test results and incident statistics.
Test Method of Open Brake Rotation in Heavy Commercial Vehicles
1 Scope
This standard specifies the use of service brake system, or only with retarder or engine brake for braking, heavy commercial vehicles or
An open-loop test method for evaluating the path and direction-holding capability of a train.
This standard applies to GB/T 15089-2001 defined in the M3, N2, N3, O3 and O4 vehicles.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
Classification of motor vehicles and trailers
ISO 8855 road vehicles vehicle dynamics and path retention vocabulary (Roadvehicle-Vehicledynamicsand
road-holdingability-Vocabulary)
ISO 15037-2-2002 Road vehicles - Vehicle dynamics test methods - Part 2. General conditions for heavy vehicles and passenger cars
(Roadvehicle-Vehicledynamicstestmethods-Part 2.Generalconditionsforheavyvehiclesandbu-
ses)
3 General rules
The main purpose of this test method is to examine the ability of heavy vehicles to maintain their path and direction during cornering braking. The initial state of the test car is
In a circular path with a radius of uniform steady circular motion, and then increase the brake strength to brake, in the test
Measure and record controller input and vehicle response.
General test conditions shall be in accordance with the provisions of ISO 15037-2, if any changes or additions need to be pointed out in the subsequent terms.
4 frame of reference
All of the motion variables used in this test to describe the ability of a vehicle to maintain course and direction during cornering braking are based on the medial axis coordinate system
(X, Y, Z) (see ISO 8855). The origin of coordinates used in this standard is the car's centroid position.
5 Measurement variables
5.1 The test should measure the following variables.
a) The first unit of a bicycle or car train.
--- Lateral acceleration, aY;
--- longitudinal acceleration, aX;
--- brake trigger signal;
--- Portrait speed, vX;
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 34588-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 34588-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 34588-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 34588-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|