|
Std ID |
Description (Standard Title) |
|
GB/T 7113.2-2014
|
Flexible insulating sleeving -- Part 2: Methods of test
|
|
GB/T 11021-2014
|
Electrical insulation -- Thermal evaluation and designation
|
|
GB/T 19264.2-2013
|
Pressboard and press paper for electrical purposes -- Part 2: Methods of test
|
|
GB/T 19264.3-2013
|
Pressboard and press paper for electrical purposes -- Part 3: Requirements for pressboard
|
|
GB/T 20629.2-2013
|
on-cellulosic paper for electrical purposes -- Part 2: Methods of test
|
|
GB/T 29627.1-2013
|
Aramid pressboard for electrical purposes -- Part 1: Definitions, designations and general requirements
|
|
GB/T 29627.2-2013
|
Aramid pressboard for electrical purposes -- Part 2: Methods of test
|
|
GB/T 11026.2-2012
|
Electrical insulating materials -- Thermal endurance properties -- Part 2: Choice of test criteria
|
|
GB/T 11026.4-2012
|
Electrical insulating materials -- Thermal endurance properties -- Part 4: Ageing ovens -- Single-chamber ovens
|
|
GB/T 29305-2012
|
Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
|
|
GB/T 29306.1-2012
|
Recommended methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHz -- Part 1: General
|
|
GB/T 29306.2-2012
|
Recommended methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHz -- Part 2: Resonance methods
|
|
GB/T 29310-2012
|
Guide for the statistical analysis of electrical insulation breakdown data
|
|
GB/T 29311-2012
|
Electrical insulating materials - A.C. voltage endurance evaluation - Introduction
|
|
GB/T 29313-2012
|
Test method for thermal transmission properties of electrical insulation materials
|
|
GB/T 4180-2012
|
Permanent magnetic material of rare earth cobalt
|
|
GB/T 4207-2012
|
Method for the determination of the proof and the comparative tracking indices of solid insulating materials
|
|
GB/T 7196-2012
|
Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids
|
|
GB/T 15022.3-2011
|
Resin based reactive compounds used for electrical insulation -- Part 3: Unfilled epoxy resinous compounds
|
|
GB/T 15022.5-2011
|
Resin based reactive compounds used for electrical insulation -- Part 5: Quartz filled epoxy resinous compounds
|
|
GB/T 19264.1-2011
|
Pressboard and press paper for electrical purposes -- Part 1: Definitions and general requirements
|
|
GB/T 20633.2-2011
|
Coatings for loaded printed wire boards (conformal coatings) -- Part 2: Methods of test
|
|
GB/T 20633.3-2011
|
Coatings for loaded printed wire boards (conformal coatings) -- Part 3: Coatings for general purpose (Class 1), high reliability (Class 2) and aerospace (Class 3)
|
|
GB/T 27749-2011
|
Heat-resistant insulating paint testing procedures for electric strength Act
|
|
GB/T 27750-2011
|
Classification of insulating liquids
|
|
GB/T 7113.3-2011
|
Flexible insulating sleeving -- Part 3: Glass textile sleeving with PVC coating
|
|
GB/T 7113.4-2011
|
Flexible insulating sleeving -- Part 4: Glass textile sleeving with acrylic based coating
|
|
GB/T 7113.5-2011
|
Flexible insulating sleeving -- Part 5: Glass textile sleeving with silicone elastomer coating
|
|
GB/T 7113.6-2011
|
Flexible insulating sleeving -- Part 6: Glass textile sleeving with polyurethane (PUR) based coating
|
|
GB/T 11026.5-2010
|
Electrical insulating materials -- Thermal endurance properties -- Part 5: Ageing ovens -- Precision ovens for use up to 300 Celsius
|
|
GB/T 11026.6-2010
|
Electrical insulating materials -- Thermal endurance properties -- Part 6: Ageing ovens -- Multi-chamber ovens
|
|
GB/T 20875.2-2010
|
Electrical insulating materials -- Methods of test for the hydrolytic stability -- Part 2: Moulded thermosets
|
|
GB/T 23756.2-2010
|
Evaluation of electrical endurance of electrical insulation systems -- Part 2: Evaluation procedures based on extreme-value distributions
|
|
GB/T 26168.1-2010
|
Electrical insulating materials -- Determination of the effects of ionizing radiation -- Part 1: Radiation interaction and dosimetry
|
|
GB/T 26168.2-2010
|
Electrical insulating materials -- Determination of the effects of ionizing radiation -- Part 2: Procedures for irradiation and test
|
|
GB/T 26168.3-2010
|
Electrical insulating materials -- Determination of the effects of ionizing radiation -- Part 3: Classification system for service in radiation environments
|
|
GB/T 26168.4-2010
|
Electrical insulating materials -- Determination of the effects of ionizing radiation -- Part 4: Procedures for assessment of ageing in service
|
|
GB/T 26169-2010
|
Electrical insulating materials -- Method to evaluate the resistance to tracking and erosion -- Rotating wheel dip test
|
|
GB/T 26170-2010
|
Electrical insulation systems -- Short-time evaluation of combined thermal and electrical stresses
|
|
GB/T 1303.8-2009
|
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 8: Requirements for rigid laminated sheets based on silicone resins
|
|
GB/T 1303.10-2009
|
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 10: Requirements for rigid laminated sheets based on bis-maleimide resins
|
|
GB/T 1303.11-2009
|
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 11: Requirements for rigid laminated sheets based on polyamide-imide resins
|
|
GB/T 1303.1-2009
|
Industrial rigid laminated sheets based on thermosetting reins for electrical purposes -- Part 1: Definitions, designations and general requirements
|
|
GB/T 1303.2-2009
|
Industrial rigid laminated sheets based on thermosetting for electrical purposes -- Part 2: Test methods
|
|
GB/T 1303.4-2009
|
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 4: Requirements for rigid laminated sheets based on epoxy resins
|
|
GB/T 1303.6-2009
|
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 6: Requirements for rigid laminated sheets based on phenolic resins
|
|
GB/T 1303.7-2009
|
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 7: Requirements for rigid laminated sheets based on polyester resins
|
|
GB/T 1303.9-2009
|
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 9: Requirements for rigid laminated sheets based on polyimide resins
|
|
GB/T 1310.2-2009
|
Varnished fabrics for electrical purposes -- Part 2: Methods of test
|
|
GB/T 13542.1-2009
|
Film for electrical insulation -- Part 1: Definitions and general requirements
|
|
GB/T 13542.2-2009
|
Film for electrical insulation -- Part 2: Methods of test
|
|
GB/T 13542.4-2009
|
Film for electrical insulation -- Part 4: Polyethylene terephthalate film used for electrical insulation
|
|
GB/T 15022.1-2009
|
Resin based reactive compounds used for electrical insulation -- Part 1: Definitions and general requirements
|
|
GB/T 15022.4-2009
|
Resin based reactive compounds used for electrical insulation -- Part 4: Unsaturated polyester based impregnating resins
|
|
GB/T 15065-2009
|
Black polyethylene compounds for wire and cable
|
|
GB/T 1981.2-2009
|
Varnishes used for electrical insulation -- Part 2: Methods of test
|
|
GB/T 1981.3-2009
|
Varnishes used for electrical insulation -- Part 3: Specifications for hot curing impregnating varnishes
|
|
GB/T 1981.4-2009
|
Varnishes used for electrical insulation -- Part 4: Polyester-imide varnishes
|
|
GB/T 1981.5-2009
|
Varnishes used for electrical insulation -- Part 5: Energy-saving fast curing melamine alkyd impregnating varnishes
|
|
GB/T 23641-2009
|
Fiber reinforced unsaturated polyester moulding -- Compounds (SMC and BMC) for electrical purposes
|
|
GB/T 23642-2009
|
Electrical insulating materials and systems instantaneous rise and repeated electrical shock voltage conditions partial discharge (PD) measurement
|
|
GB/T 24122-2009
|
Corona-resistant enamelled wire coatings
|
|
GB/T 24123-2009
|
Metallized film for capacitors
|
|
GB/T 24124-2009
|
C850 system phenolic resins cotton cloth laminated sheets
|
|
GB/T 5019.10-2009
|
Specification for insulating materials based on mica -- Part 10: Mica paper tapes for flame-resistant security cables
|
|
GB/T 5019.11-2009
|
Specification for insulating materials based on mica -- Part 11: Moulding micanite
|
|
GB/T 5019.1-2009
|
Specification for insulating materials based on mica -- Part 1: Definitions and general requirements
|
|
GB/T 5019.2-2009
|
Specification for insulating materials based on mica -- Part 2: Methods of test
|
|
GB/T 5019.3-2009
|
Specification for insulating materials based on mica -- Part 3: Commutator separators and materials
|
|
GB/T 5019.4-2009
|
Specification for insulating materials based on mica -- Part 4: Mica paper
|
|
GB/T 5019.7-2009
|
Insulating materials based on mica -- Part 7: Glass-backed and film-backed mica paper with an epoxy resin binder for vacuum pressure impregnation (VPI)
|
|
GB/T 5019.8-2009
|
Specification for insulating materials based on mica -- Part 8: Glass-backed mica paper with a B-stage epoxy resin binder
|
|
GB/T 5019.9-2009
|
Insulating materials based on mica -- Part 9: Polyester film mica paper with an epoxy resin binder for single conductor taping
|
|
GB/T 5132.1-2009
|
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes -- Part 1: General requirements
|
|
GB/T 5132.2-2009
|
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes -- Part 2: Methods of test
|
|
GB/T 5132.5-2009
|
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes -- Part 5: Round laminated moulded rods
|
|
GB/T 8411.3-2009
|
Ceramic and glass insulating materials -- Part 3: Specifications for individual materials
|
|
GB/T 20634.3-2008
|
Non-impregnated densified laminated wood for electrical purposes -- Part 3: Specifications for individual materials -- Sheets produced from birch veneer
|
|
GB/T 1303.3-2008
|
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3: Requirements for types of industrial rigid laminated sheets
|
|
GB/T 17620-2008
|
Live working -- Rigid ladders of insulation material
|
|
GB/T 17622-2008
|
Live working-gloves of insulating material
|
|
GB/T 20111.2-2008
|
Electrical insulation systems -- Procedures for thermal evaluation -- Part 2: Specific requirements for general-purpose models -- Wire-wound applications
|
|
GB/T 20111.3-2008
|
Electrical insulation systems -- Procedures for thermal evaluation -- Part 22: Specific requirements for encapsulated-coil model -- Wire-wound electrical insulation system (EIS)
|
|
GB/T 20634.2-2008
|
Non-impregnated densified laminated wood for electrical purposes -- Part 2: Methods of test
|
|
GB/T 20634.4-2008
|
Non-impregnated densified laminated wood for electrical purposes -- Part 4: Specifications for individual materials -- Rings produced from birch veneer
|
|
GB/T 22470-2008
|
General requirements for environmentally friendly moulding compounds for electrical purpose
|
|
GB/T 22471.2-2008
|
Resin impregnated glass banding tape for electrical insulation -- Part 2: Test methods
|
|
GB/T 22472-2008
|
Determination of the flammability of plastics instrumentation and equipment parts
|
|
GB/T 22566.1-2008
|
Electrical insulation system -- Electrical stresses produced by repetitive impulses -- Part 1: General method of evaluation of electrical endurance
|
|
GB/T 22567-2008
|
Electrical insulating materials -- Methods of test for the determination of the glass transition temperature
|
|
GB/T 22578.1-2008
|
Electrical insulation systems (EIS) -- Thermal evaluation of combined liquid and solid components -- Part 1: General requirements
|
|
GB/T 22579-2008
|
Guidance on the development of lists of maximum allowable temperatures for polymeric compounds used in electrotechnical equipment
|
|
GB/T 22689-2008
|
Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges
|
|
GB/T 23100-2008
|
Industrial rigid round winded tubes based on thermosetting resins for electrical purposes
|
|
GB/T 10582-2008
|
Electrical insulating materials -- Determination of electrolytic corrosion caused by insulating materials-test methods
|
|
GB/T 5591.3-2008
|
Combined flexible materials for electrical insulation -- Part 3: Specifications for individual materials
|
|
GB/T 8411.1-2008
|
Ceramic and glass insulating materials -- Part 1: Definition and classification
|
|
GB/T 8411.2-2008
|
Ceramic and glass insulating materials -- Part 2: Methods of test
|
|
GB/T 8815-2008
|
Plasticized polyvinyl chloride (PVC) compounds for wire and cable
|
|
GB/T 10065-2007
|
Gassing of insulating liquids under electrical stress and ionization
|