|
US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 7113.6-2011: Flexible insulating sleeving -- Part 6: Glass textile sleeving with polyurethane (PUR) based coating
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 7113.6-2011 | English | 209 |
Add to Cart
|
3 days [Need to translate]
|
Flexible insulating sleeving -- Part 6: Glass textile sleeving with polyurethane (PUR) based coating
| Valid |
GB/T 7113.6-2011
|
PDF similar to GB/T 7113.6-2011
Basic data | Standard ID | GB/T 7113.6-2011 (GB/T7113.6-2011) | | Description (Translated English) | Flexible insulating sleeving -- Part 6: Glass textile sleeving with polyurethane (PUR) based coating | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K15 | | Classification of International Standard | 29.035.99 | | Word Count Estimation | 9,955 | | Date of Issue | 2011-12-30 | | Date of Implementation | 2012-05-01 | | Quoted Standard | GB/T 7113-2003; GB/T 7113.2-2005; GB/T 13534-2009 | | Adopted Standard | IEC 60684-3-409-1999, MOD | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 22 of 2011 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the temperature index reached 155, with a polyurethane (PUR) continuous coating of E-type glass fiber braided hose requirements. Class hose inside diameter 0. 50mm to 30. 00mm usually between and has the following colors: black, blue, brown, green, gray, gray, pink, red, purple, white, yellow, and green/yellow. In addition to this part of the listed sizes or colors, other sizes or colors can be customized according to customer demand. These products, if in addition to other properties outside dimensions are in accordance with Table 2, Table 4 lists the requirements of this section shall be deemed to comply. Who meet the requirements of this part of the material, have reached the established level of performance. However, users in the selection of materials for a particular purpose, the appropriate application based on the actual requirements necessary to choose, and not solely on the basis of this section. | GB/T 7113.6-2011: Flexible insulating sleeving -- Part 6: Glass textile sleeving with polyurethane (PUR) based coating
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Flexible insulating sleeving Part 6. Glass textile sleeving with polyurethane (PUR) based coating
ICS 29.035.99
K15
National Standards of People's Republic of China
Insulating hose
Part 6. Polyurethane (PUR) glass fiber hose
Part 6. Glasstextilesleevingwithpolyurethane (PUR) basedcoating
(IEC 60684-3-409.1999, Flexibleinsulatingsleeving-
Part 3. Specificationsforindividualtypesofsleeving-
Sheets409. Glasstextilesleevingwithsiliconeelastomercoating, MOD)
Issued on. 2011-12-30
2012-05-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 7113 "insulation hose" is divided into the following sections.
--- Part 1. Definitions and general requirements;
--- Part 2. Test methods;
--- Part 3. PVC fiberglass hose;
--- Part 4. acrylic glass fiber hose;
--- Part 5. Silicone rubber fiberglass hose;
--- Part 6. Polyurethane (PUR) glass fiber hose;
This section GB/T 7113 Part 6.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This section uses redrafted law revision using IEC 60684-3-409.1999 "insulating sleeving - Part 3. various types of hose Regulation
Fan Section 409. Polyurethane fiberglass hose. "
Taking into account China's national conditions, in using IEC 60684-3-409.1999 when this part has made several modifications. Provision about the technical differences
And into the body of a single vertical line identifies them involved with the provisions margin. These technical differences are given in Appendix A
Its list of reasons for reference.
For ease of use, for IEC 60684-3-409.1999 This section also made the following editorial changes.
a) Remove the IEC 60684-3-409.1999 Foreword and Introduction;
b) The "IEC 60684-3 is This is a" to "this Part";
c) will be, but the references cited in the text Shiyou undated date "Normative References" section listed in the document, should be
Dated;
d) Table 1, NW values \u200b\u200bin Table 3 with "0" padded to two decimal places, so that the inner diameter tolerances after the decimal point
The same number of digits, adding a footnote to Table 3 to indicate the use of large diameter hose 6mm diameter mandrel bend test when
We used a sample;
e) Table 2 and Table 4 "maximum or minimum" and "requirements" the two columns were combined and used in the appropriate place the symbol "≤" or "≥" indicates;
f) rearrange Table 4 for unity with the GB/T 7113 in other parts of the corresponding table formatting;
g) The "± 3K" were changed to "± 3 ℃";
h) increasing the informative appendix A guide to use.
Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.
This part is proposed by the China Electrical Equipment Industrial Association.
This part of the National Standardization Technical Committee of the insulating material (SAC/TC51) centralized.
This section is drafted. Changshu Jiangnan Glass Fiber Co., Ltd., Hangzhou Xiaoshan insulation material factory in Suzhou City Huajing Insulation Material Factory, Guilin
Electric Apparatus Research Institute.
The main drafters of this section. Malin Quan, Zhang Zhigang, Zhang Shengxiang, Zu Zhang, Li Wei, Luo Zhe.
Insulating hose
Part 6. Polyurethane (PUR) glass fiber hose
1 Scope
GB/T 7113 provisions of this part of the temperature index reached 155, with polyurethane (PUR) a continuous coating of E-glass fiber weave
Hose requirements.
The inner diameter of the hose such typically between 0.50mm to 30.00mm, and has the following colors. black, blue, brown, green, gray
Color, color, pink, red, purple, white, yellow, and green/yellow.
In addition to size or color listed in this section, other sizes or colors can be customized according to customer demand. These products, if in addition to foot
Other than performance-inch line with Table 2, Table 4 lists the requirements shall be deemed to comply with this section.
Who meet the requirements of this part of the materials have reached a given level of performance. However, users in the choice of material for a particular purpose
When the application should be based on the actual requirements necessary to choose, and not simply on the basis of this section.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 7113-2003 insulated hose definitions and general requirements (IEC 60684-1. 1980, MOD)
GB/T 7113.2-2005 Test methods for insulating sleeving (IEC 60684-2.1997, MOD)
GB/T 13534-2009 mark color code (IEC 60757. 1983, IDT)
3 Named
Hoses should be identified by the following naming.
In this section, case No. 09, code-coated textile fiber tube "4" plus the distinguishing number "09" composed of "409" type.
Next to the color identified with the acronym also marked hose color, but any color used to represent the abbreviation should be consistent
GB/T 13534-2009 requirements. NC stands for "Natural/not colored." Without abbreviations, you can write color designation.
4 Requirements
In addition to regular size hose should meet GB/T 7113-2003 requirements, it must also meet Table 1, Table 2 and Table 4 requirements.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 7113.6-2011_English be delivered?Answer: Upon your order, we will start to translate GB/T 7113.6-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 7113.6-2011_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 7113.6-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|