|
US$254.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5132.2-2009: Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes -- Part 2: Methods of test
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 5132.2-2009 | English | 254 |
Add to Cart
|
3 days [Need to translate]
|
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes -- Part 2: Methods of test
| Valid |
GB/T 5132.2-2009
|
PDF similar to GB/T 5132.2-2009
Basic data | Standard ID | GB/T 5132.2-2009 (GB/T5132.2-2009) | | Description (Translated English) | Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes -- Part 2: Methods of test | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K15 | | Classification of International Standard | 29.035.99 | | Word Count Estimation | 13,160 | | Date of Issue | 2009-06-10 | | Date of Implementation | 2009-12-01 | | Older Standard (superseded by this standard) | GB/T 5132-1985; GB/T 5134-1985 | | Quoted Standard | GB/T 1033.1-2008; GB/T 1034-2008; GB/T 1041-2008; GB/T 1408.1-2006; GB/T 1409-2006; GB/T 5169.16-2008; GB/T 9341-2008; GB/T 10064-2006; GB/T 10580-2003; GB/T 11026.1-2003; ISO 3611-1978; ISO 3599-1976; ISO 6906-1984; IEC 60216-2-2005; IEC 60296-2003 | | Adopted Standard | IEC 61212-2-2006, IDT | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 8, 2009 (No. 148 overall) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the thermosetting resins for electrical purposes Industrial rigid round laminated tubes and rods of test methods. This section applies to thermosetting resins for electrical purposes Industrial rigid laminated tubes and rods back to shape. | GB/T 5132.2-2009: Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes -- Part 2: Methods of test
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes.Part 2. Methods of test
ICS 29.035.99
K15
National Standards of People's Republic of China
GB/T 5132.2-2009/IEC 61212-2.2006
Replacing GB/T 5132-1985, GB/T 5134-1985
Thermosetting resins for electrical industrial rigid round
Laminated tubes and rods - Part 2. Test methods
(IEC 61212-2.2006, IDT)
Posted 2009-06-10
2009-12-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 5132 "thermosetting resins for electrical Industrial rigid round laminated tubes and rods" contains the following sections.
--- Part 1. General requirements;
--- Part 2. Test methods;
--- Part 3. Round laminated rolled tube;
--- Part 4. Round laminated molded tubes;
--- Part 5. Round laminated molded rods;
This section GB/T 5132 Part 2.
This section identical with IEC 61212-2.2006 section "Electrical thermosetting resins for industrial rigid round laminated tubes and rods 2. Test
Method "(in English).
For ease of use, and this part of IEC 61212-2.2006 compared to do the following editorial changes.
a) Delete the international standard foreword, introduction, and references;
b) according to GB/T 1.1 revision of the International Standard Chapter 1, "Scope" statements and delete security warnings;
c) "Normative references" in the reference standard, and where there are IEC (or ISO ) standards with the corresponding national standards are national standards
Instead.
We give a list of these differences and their causes in Appendix A for reference.
This Part replaces GB/T 5132-1985 "electrical insulation laminated tube test" and GB/T 5134 "electrical insulation laminated rod again
Test methods. "
This portion of the GB /5132-1985 GB/T 5134-1985 and T compared to the main changes are as follows.
Standard structure has changed, the contents of the two criteria combined, the corresponding clauses has been adjusted.
Appendix A of this section is an informative annex.
This part is proposed by the China Electrical Equipment Industrial Association.
This part of the National Standardization Technical Committee of the insulating material (SAC/TC51) centralized.
This part mainly drafted by. Guilin Electrical Apparatus Research Institute, East wood Technology Group Co., Ltd., Xi'an Electric Co. electrical materials
Ltd., Beijing Fu Runda new insulation material limited liability company.
The main drafters of this section. Malin Quan, Zhao Ping, Duchao Yun, Liu Qihuan.
This part of the standard replaces the previous editions are.
--- GB/T 5132-1985;
--- GB/T 5134-1985.
GB/T 5132.2-2009/IEC 61212-2.2006
Thermosetting resins for electrical industrial rigid round
Laminated tubes and rods - Part 2. Test methods
1 Scope
GB/T 5132 provisions of this part of the thermosetting resins for electrical industrial rigid round laminated tubes and rods of test methods.
This section applies to thermosetting resins for electrical Industrial rigid round laminated tubes and rods.
2 Normative references
The following documents contain provisions which, through reference to GB/T 5132 to the present, constitute provisions of this standard. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
1033.1-2008 non-plastic foam density measurement GB/T Part 1. Immersion method, liquid pyknometer method and titration method
(ISO 1183-1.2004, IDT)
GB/T 1034-2008 Plastics Determination of water absorption (ISO 62.2008, IDT)
GB/T 1041-2008 Plastics Determination of compression properties (ISO 604.2002, IDT)
GB/T 1408.1-2006 electric strength of solid insulating materials - Test methods - Part 1. Tests at power frequencies (IEC 60243-1.
1998, IDT)
GB/T 1409-2006 Measurement of electrical insulating materials at power, audio, high-frequency (including meter wavelengths included) of the permittivity and dielectric loss
Consumption factor recommended method (IEC 60250. 1969, MOD)
GB/T 5169.16-2008 Fire hazard testing for electric and electronic products - Part 16. Test flames - 50W horizontal and vertical flame
Test methods (IEC 60695-11-10.2003, IDT)
GB/T 9341-2008 Plastics - Determination of flexural properties (ISO 178.2001, IDT)
(. 1964, IDT IEC 60167) Standard Test Method for Resistance of solid insulating materials GB/T 10064-2006 Determination
GB/T 10580-2003 standard conditions of solid insulating material before the test and during the test used (IEC 60212. 1971, IDT)
Part 1 GB/T 11026.1-2003 Electrical insulating materials Heat resistance. aging procedures and evaluation of test results
(IEC 60216.2001, IDT)
ISO 3611. 1978 outside micrometer
ISO 3599. 1976 readings of 0.1 and 0.05mm vernier caliper
ISO 6906. 1984 reading of 0.02mm vernier caliper
IEC 60216-2.2005 Electrical insulating materials - Thermal resistance - Part 2. Determination of electrical insulating materials heat resistance test criteria
s Choice
IEC 60296.2003 Electrical transformer fluid and the switching of unused mineral insulating oils
3 conditional processing
Unless otherwise specified, the sample should GB/T 10580-2003 standard atmospheric B (a temperature of 23 ℃ ± 2 ℃, relative humidity of 50% ±
5% processing), the processing time was 24h.
Unless otherwise specified, each sample should be tested in atmospheric conditions treated or removed from the atmosphere each sample condition treated
He began to experiment within 3min.
GB/T 5132.2-2009/IEC 61212-2.2006
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 5132.2-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 5132.2-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 5132.2-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5132.2-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|