|
US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 13542.1-2009: Film for electrical insulation -- Part 1: Definitions and general requirements
Status: Valid GB/T 13542.1: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 13542.1-2009 | English | 189 |
Add to Cart
|
3 days [Need to translate]
|
Film for electrical insulation -- Part 1: Definitions and general requirements
| Valid |
GB/T 13542.1-2009
|
| GB/T 13542-1992 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
General requirements for plastic films for electrical purposes
| Obsolete |
GB/T 13542-1992
|
PDF similar to GB/T 13542.1-2009
Basic data | Standard ID | GB/T 13542.1-2009 (GB/T13542.1-2009) | | Description (Translated English) | Film for electrical insulation -- Part 1: Definitions and general requirements | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K15 | | Classification of International Standard | 29.035.99 | | Word Count Estimation | 8,820 | | Date of Issue | 2009-06-10 | | Date of Implementation | 2009-12-01 | | Older Standard (superseded by this standard) | GB/T 13542-1992 | | Quoted Standard | GB/T 13542.2-2009 | | Adopted Standard | IEC 60674-1-1980, MOD | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 8, 2009 (No. 148 overall) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the definition of electrical insulation film, general requirements, size, inspection rules and signs, packaging, transportation and storage. This section applies to electrical insulation film. | GB/T 13542.1-2009: Film for electrical insulation -- Part 1: Definitions and general requirements---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Film for electrical insulation Part 1. Definitions and general requirements
ICS 29.035.99
K15
National Standards of People's Republic of China
Replacing GB/T 13542-1992
Film for electrical insulation
Part 1. Definitions and general requirements
(IEC 60674-1. 1980, Specificationforplasticfilmsforelectricalpurposes-
Part 1. Definitionsandgeneralrequirements, MOD)
Posted 2009-06-10
2009-12-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 13542 "Film for electrical insulation" is divided into the following sections.
--- Part 1. Definitions and general requirements;
--- Part 2. Test methods;
--- Part 3. biaxially oriented polypropylene film capacitors;
--- Part 4. Polyester film;
This section GB/T 13542 Part 1.
The partial modification using IEC 60674-1. 1980 "plastic films for electrical purposes - Part 1. Definitions and general requirements" (in English).
This part of IEC 60674-1 and the main technical differences are as follows.
1) A "Normative References" chapter;
2) A "inspection rules" chapter.
This Part replaces GB/T 13542-1992 "General requirements for plastic films for electrical purposes."
The main difference compared to part with the GB/T 13542-1992 as follows.
1) The "standard reference" to "normative references";
2) the definition of 3.1.1 "skew" to "Offset/arc."
This part is proposed by the China Electrical Equipment Industrial Association.
This part of the National Standardization Technical Committee of the insulating material (SAC/TC51) centralized.
This section is drafted. Guilin Electric Institute of Science, Technology Group Co., Ltd East wood.
The main drafters of this section. Wang Xianfeng, Zhao Ping.
This part of the standard replaces the previous editions are.
--- GB/T 13542-1992.
Film for electrical insulation
Part 1. Definitions and general requirements
1 Scope
This section GB/T 13542 specifies the definition of electrical insulation film, the general requirements, size, inspection rules and signs, packaging, transportation
Transport and storage.
This section applies to electrical insulation film.
2 Normative references
The following documents contain provisions which, through reference GB/T 13542 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
Test Method. GB/T 13542.2-2009 Electrical insulation film 2 part article (IEC 60674-2. 1988, MOD)
3 Terms and Definitions
The following terms and definitions apply to this section.
3.1
Evaluation of the film wound into a roll for the film deformation, can be offset/arc and two depressions measure.
3.1.1
When the film opened flat, its edge is not a straight line (offset or curved).
3.1.2
When the period of the film consists of two parallel horizontal position of the roller support and withstand a certain tension of the situation, some of which would be lower than the total film
The horizontal plane.
3.2
Since the film roll wound does not close, the film roll part for axial movement called off the rest of the cylinder occurs.
4 General requirements
4.1 Appearance
Film in rolls, the film surface should be flat and smooth, not wrinkled, torn, particles, bubbles, pinholes and foreign impurities.
4.2 film roll
The outer diameter of the film roll negotiated by both parties, film should be substantially cylindrical. The film should be tightly wound on the die to prevent the transport and later
When normal use off cylinder.
Unwinding film roll should be easy, there should be not conducive to unwinding and thick application side. Unless otherwise specified in the product standard, otherwise, the end of the film roll
Surface should be flat and perpendicular to the die; the end face of any one of its main plane should not exceed ± 2mm.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13542.1-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 13542.1-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 13542.1-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13542.1-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 13542.1-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13542.1-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|