|
US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5019.8-2009: Specification for insulating materials based on mica -- Part 8: Glass-backed mica paper with a B-stage epoxy resin binder
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 5019.8-2009 | English | 209 |
Add to Cart
|
3 days [Need to translate]
|
Specification for insulating materials based on mica -- Part 8: Glass-backed mica paper with a B-stage epoxy resin binder
| Valid |
GB/T 5019.8-2009
|
PDF similar to GB/T 5019.8-2009
Basic data | Standard ID | GB/T 5019.8-2009 (GB/T5019.8-2009) | | Description (Translated English) | Specification for insulating materials based on mica -- Part 8: Glass-backed mica paper with a B-stage epoxy resin binder | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K15 | | Classification of International Standard | 29.035.99 | | Word Count Estimation | 9,979 | | Date of Issue | 2009-06-10 | | Date of Implementation | 2009-12-01 | | Quoted Standard | GB/T 5019.2-2009; GB/T 5019.4-2009 | | Adopted Standard | IEC 60371-3-6-1992, MOD | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 8, 2009 (No. 148 overall) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the mica paper and glass cloth impregnated with epoxy resin composite and mica paper made ??of electrical insulating materials and performance requirements, test methods, inspection rules, marking, packaging, transport and storage. This section applies to the epoxy adhesive, single-sided or double-sided electrical alkali-free glass cloth as reinforcement material bonded mica tape with a nominal thickness ranging from 0. 09 mm to 0. 28 mm, in order to strip, sheets or supplied in rolls soft state, by the use of the B-stage product after final cure. | GB/T 5019.8-2009: Specification for insulating materials based on mica -- Part 8: Glass-backed mica paper with a B-stage epoxy resin binder
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Specification for insulating materials based on mica.Part 8. Glass-backed mica paper with a B-stage epoxy resin binder
ICS 29.035.99
K15
National Standards of People's Republic of China
Mica-based insulating materials
Part 8. Glass fabric reinforced B-stage epoxy resin
Bonded mica
(IEC 60371-3-6.1992, Specificationsforinsulatingmaterialsbasedonmica-
Part 3. Specificationsforindividualmaterials-
Sheet6. Glass-backedmicapaperwithaB-stageepoxyresinbinder, MOD)
Posted 2009-12-01 2009-06-10 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 5019 "with mica-based insulating materials" is divided into the following sections.
--- Part 1. Definitions and general requirements;
--- Part 2. Test methods;
--- Part 3. Commutator separators and materials;
--- Part 4. Mica paper;
--- Part 5. electric equipment mica plate;
--- Part 6. Polyester film reinforced B stage epoxy resin binder;
--- Part 7. vacuum pressure impregnation (VPI) film reinforced with glass cloth and epoxy resin binder;
--- Part 8. Glass fabric reinforcement B stage epoxy resin binder;
--- Part 9. single wire wrapped with epoxy polyester film mica;
--- Part 10. fire-resistant safety cables mica;
--- Part 11. plastic mica plate.
This section GB/T 5019 Part 8.
The partial modification of the use of IEC 60371-3-6.1992 "with mica-based insulating materials - Part 3. Specifications for individual materials 6
Articles. Glass fabric reinforcement B stage epoxy resin binder "and the first Amendment (2006) (in English).
This section according to IEC 60371-3-6.1992 and the first redrafting Amendment (2006). Taking into account China's national conditions, in use
IEC 60371-3-6.1992 and the first Amendment (2006), this part has made several modifications. About the technical differences between them involved
Terms of the margin identified by a single vertical line.
This part of IEC 60371-3-6.1992 and the first Amendment (2006) The differences are as follows.
1) Remove IEC 60371-3-6.1992 Foreword;
2) consider the condition of our country does not use IEC 60371-3-6.1992 Type of product naming;
3) the length of its diameter bonded mica tape volumes and disk representation (IEC 60371-3-6 to tape length indication);
4) increase the "edge curvature", "gel time", "softness", "electric strength (uncured)" performance requirements;
5) A "inspection rules" chapter;
6) increase of the applicable content and storage conditions.
This part is proposed by the China Electrical Equipment Industrial Association.
This part of the National Standardization Technical Committee of the insulating material (SAC/TC51) centralized.
This section is drafted. Sichuan East wood Technology Group Co., Xi'an Electric Electrical Materials Co., Ltd., Harbin celebrate edge
Electrical Materials Co., Ltd., National Engineering Research Center of insulating material, Guilin Institute of Electrical Science.
The main drafters of this section. Wushang Hua, Zhang Yinchuan, Youngran Kim, Zhao Ping, Wang Xianfeng.
This section first formulated.
Mica-based insulating materials
Part 8. Glass fabric reinforced B-stage epoxy resin
Bonded mica
1 Scope
GB/T 5019 provisions of this part of the electrical insulation mica paper and glass cloth impregnated with epoxy resin composite and mica paper made of
Material performance requirements, test methods, inspection rules, marking, packaging, transportation and storage.
This section applies to the epoxy adhesive, single or double sided electrical alkali-free glass cloth as reinforcing material bonded mica, which marked
Thickness from 0.09mm to 0.28mm, to strip, sheets or roll soft state service, the B stage by the use of the final product after curing.
2 Normative references
The following documents contain provisions which, through reference to GB/T 5019 to the present, constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 5019.2-2009 mica-based insulating materials - Part 2. Test methods (IEC 60371-2.2004, MOD)
GB/T 5019.4-2009 mica-based insulating materials - Part 4. mica paper (IEC 60371-3-2.2005, MOD)
3 Product Categories
This part of the product according to the heat resistance and reinforcing Classification Model, Model Table 1.
Table 1 Model
Model range Adhesives
5438-1 epoxy TOA suitable for operating temperature of 130 ℃ various motors, electrical insulation.
5440-1 Tong Ma anhydride epoxy suitable for operating temperature of 155 ℃ various motors, electrical insulation.
5440-1K Tong Ma anhydride epoxy suitable for operating temperature of 155 ℃ various motors, electrical insulation.
4 Requirements
4.1 raw materials
4.1.1 mica paper
This section relates to the mica paper shall comply with GB/T 5019.4-2009 requirements.
4.1.2 Glass cloth
Typically, glass cloth should be continuous filament glass fibers made of E-glass, except otherwise agreed by both parties, should be woven glass cloth
State, the sizing agent content by weight should not exceed 2%.
4.1.3 Epoxy
As long as the properties of the material to meet the requirements of this section, you can use different types of epoxy resin.
4.2 Performance requirements before curing
4.2.1 Appearance
Mica bonding does not allow foreign matter.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 5019.8-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 5019.8-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 5019.8-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5019.8-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|