|
US$114.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5132.5-2009: Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes -- Part 5: Round laminated moulded rods
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 5132.5-2009 | English | 114 |
Add to Cart
|
3 days [Need to translate]
|
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes -- Part 5: Round laminated moulded rods
| Valid |
GB/T 5132.5-2009
|
PDF similar to GB/T 5132.5-2009
Basic data | Standard ID | GB/T 5132.5-2009 (GB/T5132.5-2009) | | Description (Translated English) | Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes -- Part 5: Round laminated moulded rods | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K15 | | Classification of International Standard | 29.035.99 | | Word Count Estimation | 6,665 | | Date of Issue | 2009-06-10 | | Date of Implementation | 2009-12-01 | | Older Standard (superseded by this standard) | GB/T 5133-1985 | | Quoted Standard | GB/T 5132.1-2009; GB/T 5132.2-2009; ISO 472 | | Adopted Standard | IEC 61212-3-3-2006, IDT | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 8, 2009 (No. 148 overall) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the different resins and reinforcing materials for electrical industrial rigid round laminated molded rods classification and requirements. Molded rods Scope and identify the characteristics specified in Table 1. This section applies to electrical use Industrial rigid round laminated molded rods. | GB/T 5132.5-2009: Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes -- Part 5: Round laminated moulded rods
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes.Part 5. Round laminated moulded rods
ICS 29.035.99
K15
National Standards of People's Republic of China
GB/T 5132.5-2009/IEC 61212-3-3.2006
Replacing GB/T 5133-1985
Thermosetting resins for electrical industrial rigid round
Laminated tubes and rods
Part 5. Round laminated molded rods
(IEC 61212-3-3.2006, Insulatingmaterials-Industrialrigid
purposes-Part 3. Specificationsforindividualmaterials-Sheet3.
Roundlaminatedmouldedrods, IDT)
Posted 2009-12-01 2009-06-10 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 5132 "thermosetting resins for electrical industrial rigid round laminated tubes and rods" contains the following sections.
--- Part 1. General requirements;
--- Part 2. Test methods;
--- Part 3. Round laminated rolled tube;
--- Part 4. Round laminated molded tubes;
--- Part 5. Round laminated molded rods.
This section GB/T 5132 Part 5.
This section identical with IEC 61212-3-3.2006 section "Electrical thermosetting resins for industrial rigid round laminated tubes and rods 3. Single
Materials Specifications Item 3. Round laminated molded rods "(in English).
This part of IEC 61212-3-3.2006 compared to do the following editorial changes. the "Round Table 1 molded bar type" write into
Chapter 3, "naming and classification".
This Part replaces GB/T 5133-1985 "laminated rod."
This part of GB/T 5133-1985 difference is as follows.
a) In this section "preface" listed on thermosetting resins for electrical Industrial rigid round laminated tubes and rods composed of standard series
section;
b) Information about the laminated rods "name constitute", "Resin Type" and "reinforcing material types" in Chapter 4, "Nomenclature and Classification" in
Detailed provisions, and in accordance with IEC included in all models bar laminate and delete the original domestic model;
c) Remove the GB/T 5133-1985 in length and deviation requirements;
d) increasing the "insulation resistance after immersion in water", "long-term heat resistance," and "burning" of the performance requirements;
e) Remove the GB/T 5133-1985 in on "test methods" are described as a chapter number corresponding clauses included in this section in Table 4 "Round
Molded rod performance requirements ", delete the" inspection rules, marking, packaging, transport and storage "chapter.
This part is proposed by the China Electrical Equipment Industrial Association.
This part of the National Standardization Technical Committee of the insulating material (SAC/TC51) centralized.
This part mainly drafted by. East wood Technology Group Co., Ltd., Beijing Fu Runda New Insulation Materials Co., Ltd., Xi'an Electric Power
Engineering Materials Co., Ltd., Guilin Institute of Electrical Science.
The main drafters of this section. Xuemin, Zhao Ping, Liu Qihuan, Du Chaoyun.
This part of the standard replaces the previous editions are.
--- GB/T 5133-1985.
GB/T 5132.5-2009/IEC 61212-3-3.2006
Thermosetting resins for electrical industrial rigid round
Laminated tubes and rods
Part 5. Round laminated molded rods
1 Scope
This section GB/T 5132 specifies the electrical and reinforced with different resin material from industrial rigid round laminated molded rods classification
And requirements. Molded rods scope and identification features specified in Table 1.
This section applies to electric using industrial rigid round laminated molded rods.
2 Normative references
The following documents contain provisions which, through reference to GB/T 5132 to the present, constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
Part of GB/T 5132.1-2009 thermosetting resins for electrical Industrial rigid round laminated tubes and rods 1. General requirements
(IEC 61212-1.2006, IDT)
GB/T 5132.2-2009 thermosetting resins for electrical Industrial rigid round laminated tubes and rods - Part 2. Test methods
(IEC 61212-2.2006, IDT)
ISO 472 Plastics Glossary
3 Terms and Definitions
ISO 472 as required following terms and definitions apply to this section.
3.1
In die winding impregnated material layer die off after cured under heat and pressure in a cylindrical mold and then grinding to Regulation
Sized formation of a stick.
4 Nomenclature and Classification
4.1 Overview
Molded rod according to different resins are employed, reinforcing material, manufacturing method and identification features into different models.
4.2 Naming
Are named as follows.
--- In the first two initials indicate resin;
--- In the next two-letter abbreviation for the reinforcing material;
--- Serial number to two digits. The first number indicates the shape of the product, "4" indicates molded rods, the second number indicates the same
A different type of reclassification.
Acronym provisions by 4.3.
Molded rods name is represented by the following.
GB/T 5132.5-2009/IEC 61212-3-3.2006
|