|
US$154.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 1303.1-2009: Industrial rigid laminated sheets based on thermosetting reins for electrical purposes -- Part 1: Definitions, designations and general requirements
Status: Valid GB/T 1303.1: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 1303.1-2009 | English | 154 |
Add to Cart
|
3 days [Need to translate]
|
Industrial rigid laminated sheets based on thermosetting reins for electrical purposes -- Part 1: Definitions, designations and general requirements
| Valid |
GB/T 1303.1-2009
|
| GB/T 1303.1-1998 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Epoxide woven glass fabric laminated sheet
| Obsolete |
GB/T 1303.1-1998
|
| GB/T 1303-1977 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Epoxy phenolic glass cloth laminates, type 3240
| Obsolete |
GB/T 1303-1977
|
PDF similar to GB/T 1303.1-2009
Basic data | Standard ID | GB/T 1303.1-2009 (GB/T1303.1-2009) | | Description (Translated English) | Industrial rigid laminated sheets based on thermosetting reins for electrical purposes -- Part 1: Definitions, designations and general requirements | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K15 | | Classification of International Standard | 29.035.99 | | Word Count Estimation | 8,875 | | Date of Issue | 2009-06-10 | | Date of Implementation | 2009-12-01 | | Older Standard (superseded by this standard) | GB/T 18381-2001 | | Quoted Standard | GB/T 1303.2-2009 | | Adopted Standard | IEC 60893-1-2004, IDT | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 8, 2009 (No. 148 overall) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the thermosetting resins for electrical purposes Industrial rigid laminated sheets definition, classification and general requirements. Any of the following laminate is made ??of a resin as a binder: epoxy, melamine, phenolic, polyimide, silicone, casein and other unsaturated polyester resins. The following reinforcing materials may be used alone or in combination: cellulose paper, cotton cloth, glass cloth, glass roving, glass mat, polyester fabric and wood veneer. | GB/T 1303.1-2009: Industrial rigid laminated sheets based on thermosetting reins for electrical purposes -- Part 1: Definitions, designations and general requirements
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Industrial rigid laminated sheets based on thermosetting reins for electrical purposes Part 1. Definitions, designations and general requirements
ICS 29.035.99
K15
National Standards of People's Republic of China
GB/T 1303.1-2009/IEC 60893-1.2004
Replacing GB/T 18381-2001
Thermosetting resins for electrical industrial rigid laminated sheets
Part 1. Definitions, classification and general requirements
(IEC 60893-1.2004, IDT)
Posted 2009-06-10
2009-12-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 1303 "thermosetting resins for electrical industrial rigid laminated board" contains the following sections.
--- Part 1. Definitions, classification and general requirements;
--- Part 2. Test methods;
--- Part 3. Industrial rigid laminated board model;
--- Part 4. rigid epoxy laminates;
--- Part 5. rigid melamine resin laminate;
--- Part 6. rigid phenolic resin laminate;
--- Part 7. Polyester resin rigid laminates;
--- Part 8. rigid silicone resin laminate;
--- Part 9. rigid polyimide resin laminate;
--- Part 10. bismaleimide rigid laminates;
--- Part 11. Polyamide-imide resin rigid laminates;
This section GB/T 1303 Part 1.
This section identical with IEC 60893-1.2004 "thermosetting resins for electrical industrial rigid laminated sheets - Part 1. Definitions, classification and
General requirements "(in English).
The technical content section and IEC 60893-1.2004 the same, only delete the reference standard "IEC 60893-4.2003 electrically insulating material
Gas thermosetting resins for industrial rigid laminated sheets Part 4. Typical value ", because this part does not use to.
This Part replaces GB/T 18381-2001 "thermosetting resins for electrical industrial rigid laminated sheets definitions, designations and general
Claim".
This section differs GB/T 18381-2001 are as follows.
a) identifies the electrical components of thermosetting resins for industrial rigid laminated sheets standard "foreword" in;
b) an increase in Chapter 2, "Normative references";
c) an increase of "5.2 sheet size" clauses.
This part is proposed by the China Electrical Equipment Industrial Association.
This part of the National Standardization Technical Committee of the insulating material (SAC/TC51) centralized.
This part mainly drafted by. Guilin Electrical Apparatus Research Institute, East wood Technology Group Co., Ltd., Beijing Fu Runda new insulation material
Limited liability company, Xian Xi, electrical materials limited liability company.
Drafters of this section. Luozhuan Yong, Zhao Ping, Liu Qihuan, Du Chaoyun.
This part of the standard replaces the previous editions are.
--- GB/T 1305-1985, GB/T 18381-2001.
GB/T 1303.1-2009/IEC 60893-1.2004
Thermosetting resins for electrical industrial rigid laminated sheets
Part 1. Definitions, classification and general requirements
1 Scope
GB/T 1303 provisions of this part of the thermosetting resins for electrical industrial rigid laminated board (hereinafter referred to as laminates) definition, classification and
General requirements. Laminate according to any one of the following is made of a resin as a binder. epoxy, melamine, phenolic, polyimide, silicones, unsaturated
Polyester and other resins. The following reinforcing materials may be used alone or in combination. cellulose paper, cotton cloth, glass cloth, glass roving, glass
Glass mat, polyester fabric and wood veneer.
2 Normative references
The following documents contain provisions which, through GB/T reference in this 1303 constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 1303.2-2009 Electrical thermosetting resins - Part 2 - Industrial rigid laminated sheets. Methods of test (IEC 60893-2.
2003, MOD)
3 Definitions
3.1
Thermosetting resin as a binder, the binder and impregnated with bonded together under heat and pressure a stack of sheet material as a reinforcing material
Layer board composition.
Note. Other ingredients, such as coloring agents, may also be added.
3.2
Containing a plurality of epoxy groups and can be cross-linked synthetic resin.
3.3
Melamine and formaldehyde or another compound capable of providing a methylene bridge polycondensation of an amino resin.
3.4
Polycondensation, phenol homologues and/or derivatives thereof with formaldehyde from the resin commonly known.
3.5
By the esters of repeating structural units and with carbon - carbon unsaturated bond and with an unsaturated monomer or prepolymer for subsequent crosslinking chains of
polymer.
3.6
Polymer backbone consisting of alternating silicon atoms and oxygen atoms with side groups containing carbon atoms and can be cross-linked resin.
GB/T 1303.1-2009/IEC 60893-1.2004
|