Path: Home > GB/T > Page284 > GB/T 1303.10-2009 Home > Standard_List > GB/T > Page284 > GB/T 1303.10-2009

GB/T 1303.10-2009 English PDF

US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 1303.10-2009: Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 10: Requirements for rigid laminated sheets based on bis-maleimide resins
Status: Valid

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
GB/T 1303.10-2009	English	279	Add to Cart	3 days [Need to translate]	Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 10: Requirements for rigid laminated sheets based on bis-maleimide resins	Valid	GB/T 1303.10-2009

PDF similar to GB/T 1303.10-2009

Standard similar to GB/T 1303.10-2009

GB/T 1303.8 GB/T 1408.1 GB/T 1408.2 GB/T 1303.12 GB/T 1303.5 GB/T 1303.11

Basic data

Standard ID	GB/T 1303.10-2009 (GB/T1303.10-2009)
Description (Translated English)	Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 10: Requirements for rigid laminated sheets based on bis-maleimide resins
Sector / Industry	National Standard (Recommended)
Classification of Chinese Standard	K15
Classification of International Standard	29.035.01
Word Count Estimation	12,167
Date of Issue	2009-06-10
Date of Implementation	2009-12-01
Quoted Standard	GB/T 1303.1-2009; GB/T 1303.2-2009; GB/T 1303.3-2008
Adopted Standard	IEC 60893-3-7-2003, MOD
Regulation (derived from)	Announcement of Newly Approved National Standards No. 8, 2009 (No. 148 overall)
Issuing agency(ies)	General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary	This standard specifies the bismaleimide resin laminate rigid classification, nomenclature, requirements, test methods, and delivery requirements. This section applies to the glass cloth substrate to a bismaleimide resin is bonded pairs formed by hot pressing maleimide rigid plastic resin laminate.

GB/T 1303.10-2009: Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 10: Requirements for rigid laminated sheets based on bis-maleimide resins

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 10. Requirements for rigid laminated sheets based on bis-maleimide resins ICS 29.035.01 K15 National Standards of People's Republic of China Thermosetting resins for electrical industrial rigid laminated sheets Part 10. bismaleimide rigid laminated sheets (IEC 60893-3-7.2003, Insulatingmaterials-Industrialrigidlaminated Part 3. Specificationsforindividualmaterials- Sheet7. Requirementsforrigidlaminatedsheets basedonpolyimideresins, MOD) Posted 2009-12-01 2009-06-10 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 1303 "thermosetting resins for electrical industrial rigid laminated board", is divided into the following sections. --- Part 1. Definitions, designations and general requirements; --- Part 2. Test methods; --- Part 3. Industrial rigid laminated board model; --- Part 4. rigid epoxy laminates; --- Part 5. rigid melamine resin laminate; --- Part 6. rigid phenolic resin laminate; --- Part 7. Polyester resin rigid laminates; --- Part 8. rigid silicone resin laminate; --- Part 9. rigid polyimide resin laminate; --- Part 10. bismaleimide rigid laminates; --- Part 11. Polyamide-imide resin rigid laminates; This section GB/T 1303 Part 10. The partial modification of the use of IEC 60893-3-7.2003 "thermosetting resins for electrical industrial rigid laminated sheets - Part 3. Specifications for individual materials Regulation Fan Section 7. polyimide resin laminate rigid requirements "(in English) of the relevant content. This part of IEC 60893-3-7.2003 differences are as follows. a) Remove the IEC 60893-3-7.2003 preface and introduction, the introduction content into this part of the preamble; b) of Chapter 1, "program" has been modified, deleted the material meets note, increasing the scope of application; c) delete the dimension in Chapter 3 of labeling information; d) according to the actual situation needs, supplemented with "apparent flexural modulus of elasticity," "vertical layer to the compression strength", "parallel to the shear layer Strength "," Tensile Strength "," adhesive strength "," 1MHz lower dielectric loss factor "," 1MHz dielectric constant "," resistance to tracking Index "," Temperature Index "and" density "of performance requirements related to technical differences in the terms they are involved in the margin A single vertical line identification; e) The "Requirements" chapter of the press, "look", "size" and "flatness", "performance requirements," points written in the "supply requirements" as a separate chapter Write, while IEC 60893-3-7.2003 in Table 5 were modified, the contents of the memo included in this section of Table 6. Table Note; the IEC 60893-3-7.2003 Table 5 - Test methods included in this section reg Chapter 5, "test" rewrite and adds Test methods and cut slats General; f) Remove the IEC 60893-3-7.2003's "References." This part is proposed by the China Electrical Equipment Industrial Association. This part of the National Standardization Technical Committee of the insulating material (SAC/TC51) centralized. This section is drafted. Xian Xi, electrical materials Co., Ltd., Beijing Fu Runda new insulation material limited liability company, Guilin electricity Institute is science. Drafters of this section. Duchao Yun, Liu Qihuan, Luozhuan Yong. This section first formulated. Thermosetting resins for electrical industrial rigid laminated sheets Part 10. bismaleimide rigid laminated sheets

1 Scope

GB/T 1303 provisions of this part of the classification bismaleimide rigid laminate, name, requirements, test methods and Availability Claim. This section applies to glass cloth as a base material for bismaleimide an adhesive resin formed by hot pressing hard bismaleimide resin Laminate.

2 Normative references

The following documents contain provisions which, through GB/T reference in this 1303 constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 1303.1-2009 thermosetting resins for electrical industrial rigid laminated sheets - Part 1. Definitions, classification and general requirements (IEC 60893-1.2004, IDT) GB/T 1303.2-2009 Electrical thermosetting resins - Part 2 - Industrial rigid laminated sheets. Methods of test (IEC 60893-2. 2002, MOD) GB/T 1303.3-2008 thermosetting resins for electrical industrial rigid laminated sheets - Part 3. Industrial rigid laminated board Model (IEC 60893-3-1.2002, MOD)

3 naming and classification

3.1 Naming According to GB/T 1303.3-2008 provisions to the resin and reinforcing material and sheet properties are named. Example. BMI  bismaleimide resin GC  glass cloth reinforcement   feature series 3.2 Classification Table 1 bismaleimide resin laminate industrial rigid model Model uses and properties BMIGC301 mechanical and electrical use. Good mechanical and electrical properties at high temperatures.

4 Requirements

4.1 Appearance Visual inspection. 4.2 Dimensions 4.2.1 laminate boards allow original width and length deviation should meet the requirements of Table 2.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 1303.10-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 1303.10-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 1303.10-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 1303.10-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.