|
Std ID |
Description (Standard Title) |
Detail |
|
GB/T 30772-2014
|
Phenolic resin for phenolic moulding compound
|
GB/T 30772-2014
|
|
GB/T 30915-2014
|
A-hydroxy polyether polyols
|
GB/T 30915-2014
|
|
GB/T 30916-2014
|
Blend polyol for rigid polyurethane foam used in spraying
|
GB/T 30916-2014
|
|
GB/T 30923-2014
|
Plastics -- Polypropylene materials for melt-blown
|
GB/T 30923-2014
|
|
GB/T 31062-2014
|
Polymeric polyols
|
GB/T 31062-2014
|
|
GB/T 31331-2014
|
Requirement and identification for environmental protection of modified plastics
|
GB/T 31331-2014
|
|
GB/T 4615-2013
|
Poly (vinyl chloride) -- Determination of residual vinyl chloride monomer -- Gas-chromatographic method
|
GB/T 4615-2013
|
|
GB/T 13454.2-2013
|
Plastics -- Melamine-formaldehyde powder moulding compounds (MF-PMCs) -- Part 2: Preparation of test specimens and determination of properties
|
GB/T 13454.2-2013
|
|
GB/T 13454.3-2013
|
Plastics -- Melamine-formaldehyde powder moulding compounds (MF-PMCs) -- Part 3: Requirements for selected moulding compounds
|
GB/T 13454.3-2013
|
|
GB/T 16579-2013
|
D001 macroporous strongly acidic styrene type cation exchange resins
|
GB/T 16579-2013
|
|
GB/T 16580-2013
|
D201 macroporous strongly basic styrene type anion exchange resins
|
GB/T 16580-2013
|
|
GB/T 2915-2013
|
Determination of conductivity of water extract of polyvinyl chloride resins
|
GB/T 2915-2013
|
|
GB/T 29640-2013
|
Plastics -- Glass fiber reinforced poly (decamethylene terephthalamide) compound
|
GB/T 29640-2013
|
|
GB/T 29641-2013
|
Poly (methyl methacrylate) (PMMA) cast noise barriers
|
GB/T 29641-2013
|
|
GB/T 29645-2013
|
Plastics -- Recycled polystyrene compound
|
GB/T 29645-2013
|
|
GB/T 29646-2013
|
Modified biodegradable polyester used for blown film
|
GB/T 29646-2013
|
|
GB/T 29874-2013
|
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of residual vinyl chloride monomer by gas-chromatographic analysis of dry powder
|
GB/T 29874-2013
|
|
GB/T 3403.2-2013
|
Plastics -- Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF-and UF/MF-PMCs) -- Part 2: Preparation of test specimens and determination of properties
|
GB/T 3403.2-2013
|
|
GB/T 3403.3-2013
|
Plastics -- Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF-and UF/MF-PMCs) -- Part 3: Requirements for selected moulding compounds
|
GB/T 3403.3-2013
|
|
GB/T 13657-2011
|
Bisphenol-A epoxy resin
|
GB/T 13657-2011
|
|
GB/T 26392-2011
|
Slow recovery foam -- Determination of recovery time
|
GB/T 26392-2011
|
|
GB/T 26709-2011
|
Rigid polyurethane foam for solar water heaters
|
GB/T 26709-2011
|
|
GB/T 28117-2011
|
Multi-layer co-extrusion films and pouches for food packaging
|
GB/T 28117-2011
|
|
GB/T 28118-2011
|
Plastics and aluminum foil laminated films and pouches for food packaging
|
GB/T 28118-2011
|
|
GB/T 12008.2-2010
|
Plastics - Polyether polyols - Part 2: Specification
|
GB/T 12008.2-2010
|
|
GB/T 15594-2010
|
Plastics -- Octahydroxy polyether polyols
|
GB/T 15594-2010
|
|
GB/T 15597.2-2010
|
Plastics -- Poly (methyl methacrylate) (PMMA) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
|
GB/T 15597.2-2010
|
|
GB/T 16576-2010
|
Plastics -- Trihydroxy polyether polyols
|
GB/T 16576-2010
|
|
GB/T 16577-2010
|
Plastics -- Tetrahydroxy polyether polyols
|
GB/T 16577-2010
|
|
GB/T 25254-2010
|
Poly-(tetra methylene ether glycol) (PTMEG) for industrial
|
GB/T 25254-2010
|
|
GB/T 3402.2-2010
|
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Part 2: Preparation of test samples and determination of properties
|
GB/T 3402.2-2010
|
|
GB/T 9345.5-2010
|
Plastics -- Determination of ash -- Part 5: Poly (vinyl chloride)
|
GB/T 9345.5-2010
|
|
GB/T 11115-2009
|
Polyethylene (PE) resin
|
GB/T 11115-2009
|
|
GB/T 12672-2009
|
Acrylonitrile-butadiene-styrene (ABS) resin
|
GB/T 12672-2009
|
|
GB/T 15597.1-2009
|
Plastics -- Poly (methyl methacrylate) (PMMA) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
|
GB/T 15597.1-2009
|
|
GB/T 23652-2009
|
Plastics -- PVC resins -- Determination of compacted apparent bulk density
|
GB/T 23652-2009
|
|
GB/T 23653-2009
|
Plastics -- PVC resins for general use -- Determination of hot plasticizer absorption
|
GB/T 23653-2009
|
|
GB/T 24138-2009
|
Petroleum resin
|
GB/T 24138-2009
|
|
GB/T 24149.1-2009
|
Plastics -- Polypropylene (PP) compound for automobile -- Part 1: Bumper
|
GB/T 24149.1-2009
|
|
GB/T 24150-2009
|
Plastics -- Flame retardant resistant polystyrene compound
|
GB/T 24150-2009
|
|
GB/T 24151-2009
|
Plastics -- Glass fiber reinforced and flame retardant poly (butylene terephthalate) compound
|
GB/T 24151-2009
|
|
GB/T 24395-2009
|
Adsorption resin for food industrial use
|
GB/T 24395-2009
|
|
GB/T 24411-2009
|
Phenolic resin for friction materials
|
GB/T 24411-2009
|
|
GB/T 24412-2009
|
Phenolic resins for abrasives
|
GB/T 24412-2009
|
|
GB/T 24413-2009
|
Phenolic urethane resin for foundry
|
GB/T 24413-2009
|
|
GB/T 24451-2009
|
Low resilience flexible polyether polyurethane cellular plastics
|
GB/T 24451-2009
|
|
GB/T 4617-2009
|
Plastics -- Phenolic moulding -- Determination of acetone-soluble matter
|
GB/T 4617-2009
|
|
GB/T 6343-2009
|
Cellular plastics and rubbers -- Determination of apparent density
|
GB/T 6343-2009
|
|
GB/T 11547-2008
|
Plastic -- Methods of test for the determination of the effects of immersion in liquid chemicals
|
GB/T 11547-2008
|
|
GB/T 11992-2008
|
Determination of exchange capacity of strong basic anion exchange resins in chloride form
|
GB/T 11992-2008
|
|
GB/T 12670-2008
|
Polypropylene (PP) Resin
|
GB/T 12670-2008
|
|
GB/T 12671-2008
|
Polystyrene (PS) resin
|
GB/T 12671-2008
|
|
GB/T 13659-2008
|
001×7 Strong acid polystyrene cation exchange resin
|
GB/T 13659-2008
|
|
GB/T 13660-2008
|
201×7 Strong base polystyrene anion exchange resin
|
GB/T 13660-2008
|
|
GB/T 15595-2008
|
Polyvinyl chloride resins -- Test methods for the thermal stability -- Whiteness method
|
GB/T 15595-2008
|
|
GB/T 16613-2008
|
Plastics -- Preparation of PVC pastes for test purposes -- Dissolver method
|
GB/T 16613-2008
|
|
GB/T 1843-2008
|
Plastics - Determination of izod impact strength
|
GB/T 1843-2008
|
|
GB/T 1844.4-2008
|
Plastics -- Symbols and abbreviated terms -- Part 4: Flame retardants
|
GB/T 1844.4-2008
|
|
GB/T 21332-2008
|
Rigid cellular plastics -- Determination of water vapour transmission properties
|
GB/T 21332-2008
|
|
GB/T 21460.2-2008
|
Plastics -- Styrene/acrylonitrile (SAN) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
|
GB/T 21460.2-2008
|
|
GB/T 21843-2008
|
Plastics -- Vinyl chloride homopolymer and copolymer resins -- Particle size determination by mechanical sieving
|
GB/T 21843-2008
|
|
GB/T 21988-2008
|
Plastics -- Vinyl chloride homopolymer and copolymer resins -- Sieve analysis in water
|
GB/T 21988-2008
|
|
GB/T 21989-2008
|
Plastics -- Poly (vinyl chloride) pastes -- Determination of apparent viscosity using the severs rheometer
|
GB/T 21989-2008
|
|
GB/T 21990-2008
|
Polyvinyl chloride (PVC) pastes -- Determination of fineness of grind
|
GB/T 21990-2008
|
|
GB/T 21991-2008
|
Plastics -- Preparation of PVC paste for test purpose -- Planetary-mixer method
|
GB/T 21991-2008
|
|
GB/T 21992-2008
|
Polyvinyl chloride resins for Paste -- Determination of number of impurities particles and foreign particles
|
GB/T 21992-2008
|
|
GB/T 21993-2008
|
Polyvinyl chloride resins -- Determination of the content of methanol or ethanol extract
|
GB/T 21993-2008
|
|
GB/T 1040.5-2008
|
Plastics -- Determination of tensile properties -- Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
|
GB/T 1040.5-2008
|
|
GB/T 1043.1-2008
|
Plastics -- Determination of Charpy impact properties -- Part 1: Non-instrumented impact test
|
GB/T 1043.1-2008
|
|
GB/T 2914-2008
|
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of volatile matter (including water)
|
GB/T 2914-2008
|
|
GB/T 3403.1-2008
|
Plastics -- Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF-and UF/MF-PMCs) -- Part 1: Designation system and basis for specifications
|
GB/T 3403.1-2008
|
|
GB/T 4611-2008
|
Determination method of fish eyes for polyvinyl chloride resins of general use
|
GB/T 4611-2008
|
|
GB/T 4612-2008
|
Plastics -- Epoxy compounds -- Determination of epoxy equivalent
|
GB/T 4612-2008
|
|
GB/T 4615-2008
|
Poly (vinyl chloride) -- Determination of residual vinyl chloride monomer content -- Gas chromatographic method
|
GB/T 4615-2008
|
|
GB/T 4618.1-2008
|
Plastics -- Epoxy resins -- Determination of chlorine content -- Part 1: Inorganic chlorine
|
GB/T 4618.1-2008
|
|
GB/T 4618.2-2008
|
Plastics -- Epoxy resins -- Determination of chlorine content -- Part 2: Easily saponifiable chlorine
|
GB/T 4618.2-2008
|
|
GB/T 7134-2008
|
Poly (methyl methacrylate) cast sheets
|
GB/T 7134-2008
|
|
GB/T 9345.1-2008
|
Plastics -- Determination of ash -- Part 1: General methods
|
GB/T 9345.1-2008
|
|
GB/T 9345.2-2008
|
Plastics -- Determination of ash -- Part 2: Poly (alkylene terephthalate) materials
|
GB/T 9345.2-2008
|
|
GB/T 9345.4-2008
|
Plastics -- Determination of ash -- Part 4: Polyamides
|
GB/T 9345.4-2008
|
|
GB/T 9348-2008
|
Plastics -- Poly (vinyl chloride) resins -- Determination of number of impurities and foreign particles
|
GB/T 9348-2008
|
|
GB/T 21059-2007
|
Plastics -- Polymers/resins in the liquid state or as emulsions or dispersions -- Determination of viscosity using a rotational viscometer with defined shear rate
|
GB/T 21059-2007
|
|
GB/T 21060-2007
|
Plastics -- Determination of pourability
|
GB/T 21060-2007
|
|
GB/T 2916-2007
|
Plastic -- Vinyl chloride homopolymer and copolymer resins -- Sieve analysis using air-jet sieve apparatus
|
GB/T 2916-2007
|
|
GB/T 3401-2007
|
Determination of the viscosity of Poly (vinyl chloride) resins in dilute solution using capillary viscometers
|
GB/T 3401-2007
|
|
GB/T 8812.1-2007
|
Rigid cellular plastics -- Determination of flexural properties -- Part 1: Basic bending test
|
GB/T 8812.1-2007
|
|
GB/T 8812.2-2007
|
Rigid cellular plastics -- Determination of flexural properties -- Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
|
GB/T 8812.2-2007
|
|
GB/T 12812-2006
|
Rigid cellular plastics -- Determination of friability
|
GB/T 12812-2006
|
|
GB/T 20219-2006
|
Spray-applied rigid polyurethane cellular plastics
|
GB/T 20219-2006
|
|
GB/T 20672-2006
|
Cellular plastics, rigid -- Determination of compressive creep under specified load and temperature conditions
|
GB/T 20672-2006
|
|
GB/T 20673-2006
|
Cellular plastics -- Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures
|
GB/T 20673-2006
|
|
GB/T 10802-2006
|
General flexible polyether polyurethane cellular plastics
|
GB/T 10802-2006
|
|
GB/T 10807-2006
|
Flexible cellular polymeric materials -- Determination of hardness (indentation technique)
|
GB/T 10807-2006
|
|
GB/T 10808-2006
|
Flexible cellular polymeric materials -- Determination of tear strength
|
GB/T 10808-2006
|
|
GB/T 5761-2006
|
Suspension polyvinyl chloride resins of general purpose
|
GB/T 5761-2006
|
|
GB/T 20022-2005
|
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of apparent density
|
GB/T 20022-2005
|
|
GB/T 3402.1-2005
|
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Part 1: Designation system and basis for specifications
|
GB/T 3402.1-2005
|
|
GB/T 8810-2005
|
Determination of water absorption of rigid cellular plastics
|
GB/T 8810-2005
|
|
GB/T 12004.4-2003
|
Polyvinyl chloride paste -- Determination of apparent viscosity by the Brookfield test method
|
GB/T 12004.4-2003
|
|
GB/T 18964.2-2003
|
Plastics -- Impact-resistant polystyrene (PS-Ⅰ) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
|
GB/T 18964.2-2003
|