|
US$279.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 24150-2009: Plastics -- Flame retardant resistant polystyrene compound
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 24150-2009 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Plastics -- Flame retardant resistant polystyrene compound
| Valid |
GB/T 24150-2009
|
PDF similar to GB/T 24150-2009
Basic data | Standard ID | GB/T 24150-2009 (GB/T24150-2009) | | Description (Translated English) | Plastics -- Flame retardant resistant polystyrene compound | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G32 | | Classification of International Standard | 83.080.20 | | Word Count Estimation | 12,132 | | Date of Issue | 2009-06-15 | | Date of Implementation | 2010-02-01 | | Quoted Standard | GB/T 1033.1-2008; GB/T 1040.2-2006; GB/T 1634.2-2004; GB/T 1843-2008; GB/T 1844.1-2008; GB/T 1844.4-2008; GB/T 2547-2008; GB/T 2918-1998; GB/T 3682-2000; GB/T 5169.16-2008; GB/T 5169.17-2008; GB/T 8170-2008; GB/T 9341-2008; GB/T 17037.1-1997; GB/T 18964.2-2003 | | Regulation (derived from) | National Standard Approval Announcement 2009 No.8 (Total No.148) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the classification of special material impact polystyrene flame named, requirements, test methods, inspection rules, signs, packaging, transport and storage. This standard applies to impact polystyrene matrix, the addition of flame retardants and other additives such as flame retardant formed by melt blending disturbing impact polystyrene Compound. The material is mainly used in the manufacture of electrical products. | GB/T 24150-2009: Plastics -- Flame retardant resistant polystyrene compound---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plastics. Flame retardant imsistant polystyrene compound
ICS 83.080.20
G32
National Standards of People's Republic of China
Retardant impact polystyrene plastic Compound
Posted 2009-06-15
2010-02-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
Appendix A of this standard is an informative annex.
The standard proposed by China Petroleum and Chemical Industry Association.
This standard by the National Standardization Technical Committee plastic plastic resins and petrochemical products Club (SAC/TC15/SC1) centralized.
This standard is drafted by. blond Technology Co., Ltd.
Participated in the drafting of this standard. Guangzhou Yi-chang Technology Co., Ltd. Shanghai Pu Split composites, industrial and letter
Fifth Institute of the Ministry of electronic information, Konka Group Co., Ltd., TCL King Electrical Appliances Co., Ltd., Sichuan Changhong Mould & Plastic Technology Co.,
the company.
The main drafters of this standard. Ye Nan Biao, Wang Lin, Liu Qixiang, director of wind, easy to support the military, Ningkai Jun, Li Jianjun, Zhang Xiangfu, Jiang Chunxu, Song Hongchun,
Liu Yongzhong.
This standard is the first release.
Retardant impact polystyrene plastic Compound
1 Scope
This standard specifies the classification of special fire-retardant impact polystyrene naming requirements, test methods, inspection rules, marking, packaging, transportation
And storage.
This standard applies to the impact polystyrene matrix, adding flame retardants and other additives, such as flame resistance is formed by melt blending
Impact polystyrene Compound. This material is mainly used in the manufacture of electrical products.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
1033.1-2008 non-plastic foam density measurement GB/T Part 1. Immersion method, liquid pyknometer method and titration method
(ISO 1183-1.2004, IDT)
GB /1040.2-2006 Plastics Determination of tensile properties T Part 2. Test plastics molding and extrusion conditions (ISO 527-
2.1993, IDT)
GB/T 1634.2-2004 Determination of plastic deflection temperature under load - Part 2. Plastics, ebonite and long-fiber-reinforced composite materials
Material (ISO 75-2.2003, IDT)
Determination of strength GB/T 1843-2008 plastic Izod impact (ISO 180.2000, IDT)
GB/T 1844.1-2008 Plastics - Symbols and abbreviated terms - Part 1. Basic polymers and their special characteristics (ISO 1043-1.
2001, IDT)
GB/T 1844.4-2008 Plastics - Symbols and abbreviated terms - Part 4. Flame Retardant (ISO 1043-4.1998, IDT)
GB/T 2547-2008 plastic sampling method
GB/T 2918-1998 standard plastic sample conditioning and environmental tests (idtISO 291.1997)
GB/T 3682-2000 quality thermoplastic melt flow rate and melt volume flow rate measurement (idtISO 1133.
1997)
GB/T 5169.16-2008 Fire hazard testing for electric and electronic products - Part 16. Test flames - 50W horizontal and vertical flame
Test methods (IEC 60695-11-10.2003, IDT)
GB/T 5169.17-2008 Fire hazard testing for electric and electronic products - Part 17. Test flames - 500W flame test methods
(IEC 60695-11-20.2003, IDT)
GB/T 8170-2008 revised value represents about rules and limit values and judgment
GB/T 9341-2008 Plastics - Determination of flexural properties (ISO 178.2001, IDT)
GB/T 17037.1-1997 Preparation of injection molded thermoplastic material specimens - Part 1. General principles and multipurpose specimens and long
Article prepared sample (idtISO 294-1.1996)
GB/T 18964.2-2003 plastic-impact polystyrene (PS-I) molding and extrusion materials - Part 2. Sample preparation and sexual
Can be measured
SH/T 1541-2006 Test method for thermoplastic granules Appearance
SJ/T 11363-2006 electronic information products of toxic and hazardous substances in requirements
SJ/T 11365-2006 Electronic Information Products Testing methods for hazardous substances
|