Search result: GB/T 20219-2015 (GB/T 20219-2006 Older version)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 20219-2015 | English | 209 |
Add to Cart
|
3 days [Need to translate]
|
Rigid cellular plastics-spray-applied polyurethane foam for thermal insulation
| Valid |
GB/T 20219-2015
|
| GB/T 20219-2006 | English | 399 |
Add to Cart
|
3 days [Need to translate]
|
Spray-applied rigid polyurethane cellular plastics
| Obsolete |
GB/T 20219-2006
|
| Standard ID | GB/T 20219-2015 (GB/T20219-2015) | | Description (Translated English) | Rigid cellular plastics-spray-applied polyurethane foam for thermal insulation | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G32 | | Classification of International Standard | 83.100 | | Word Count Estimation | 10,171 | | Date of Issue | 2015-06-02 | | Date of Implementation | 2016-01-01 | | Older Standard (superseded by this standard) | GB/T 20219-2006 | | Quoted Standard | GB/T 2918-1998; GB/T 6343-2009; GB/T 8810-2005; GB/T 8811-2008; GB/T 8813-2008; GB/T 9641-1988; GB/T 10294-2008; GB/T 10295-2008; GB/T 10799-2008; GB/T 21332-2008 | | Regulation (derived from) | National Standard Announcement 2015 No.19 | | Issuing agency(ies) | Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China; Standardization Administration of China | | Summary | This Standard specifies the thermal insulation spray rigid polyurethane foam of classification, requirements, test methods and inspection rules. This Standard applies to buildings or buildings for thermal insulation, rigid polyurethane spray a service temperature range of 60��C to 80��C foam. This Standard does not apply to single-component polyurethane foam material. |
GB/T 20219-2015
Rigid cellular plastics-spray-applied polyurethane foam for thermal insulation
ICS 83.100
G32
National Standards of People's Republic of China
Replacing GB/T 20219-2006
Thermal insulation spray rigid polyurethane foam
Issued on. 2015-06-02
2016-01-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard replaces GB/T 20219-2006 "spray rigid polyurethane foam." Compared with GB/T 20219-2006, in addition to editing
Modifications outside the main technical changes are as follows.
--- Amend the foreword, scope and normative references;
--- Modify the product classification and methods from the original class Ⅰ, Ⅱ class modify ⅠA, ⅠB, ⅠC, ⅡA, ⅡB five categories (see Chapter 3,
Chapter 4 of the 2006 edition);
--- Increasing the apparent core density, tensile strength, water absorption three performance testing requirements (see 4.1);
--- Modify the test requirements for dimensional stability indicators (see Table 2, 2006 edition of the Table 1);
--- Modify the "initial conditions at 23 ℃ thermal conductivity" (see Table 2, 2006 edition of the Table 1);
--- Modify the "water vapor permeability value" (see Table 2, 2006 edition of the Table 1);
--- Delete the words "at 10 ℃ thermal conductivity" requirement (see the 2006 edition of the Table 1);
--- Deleted "80 ℃ and 48h after pressure 20kPa compressive creep" (see the 2006 edition of the Table 1);
--- Remove the "Test Report" (see the 2006 edition of Chapter 8);
--- Modify the "Inspection Rules" (see Chapter 6, Chapter 7, 2006 edition).
The standard proposed by China National Light Industry Council.
This standard by the National Plastics Standardization Technical Committee (SAC/TC48) centralized.
This standard was drafted. a Norwich Shandong New Materials Co., Ltd., Beijing Technology and Business University, Nanjing Red Polaroid Corp., Langfang City, Laguna
Bao Polyurethane Co., Ltd., Jiangsu Institute of Chemical Co., Ltd.
The main drafters of this standard. Industry Xu Feng, Chen Qian, Vivaldi, ROADS, Wu Hao.
Thermal insulation spray rigid polyurethane foam
1 Scope
This standard specifies thermal insulation spray rigid polyurethane foam classification, requirements, test methods and inspection rules.
This standard applies to buildings or buildings for thermal insulation, spray rigid polyurethane foam service temperature range of -60 ℃ to 80 ℃
plastic.
This standard does not apply to single-component polyurethane foam material.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2918-1998 plastic sample conditioning and testing of the standard environment
GB/T 6343-2009 foam and rubber Determination of apparent density
Determination of GB/T 8810-2005 rigid foam water absorption
GB/T 8811-2008 rigid foam dimensional stability test methods
Measuring performance GB/T 8813-2008 rigid foam compression
Performance test method GB/T 9641-1988 rigid foam stretch
GB/T 10294-2008 steady insulation resistance and related properties - Guarded hot plate method
GB/T 10295-2008 steady-state thermal resistance and insulation related properties - Heat flow meter method
Determination of GB/T 10799-2008 rigid foam volume percentage of open and closed cells
GB/T 21332-2008 Determination of rigid foam water vapor transmission properties
Category 3
Products in accordance with the type of blowing agent, whether bearer, closed-cell foam open state is divided into ⅠA, ⅠB, ⅠC, ⅡA, ⅡB five categories (Table 1).
Table 1 classification
Categories open closed cell foaming agent carrying instructions
ⅠA fluorocarbon closed-cell non-bearing
It may not be exposed to the environment, the only self-supporting foam, such as for walls, roofs or
Similar place insulation
ⅠB
The reaction of water with isocyanate
Carbon dioxide generated
Non-bearing semi-closed cells
It may not be exposed to the environment, the only self-supporting foam, such as for walls, roofs or
Similar place insulation
ⅠC
The reaction of water with isocyanate
Carbon dioxide generated
Opening non-bearing
It may not be exposed to the environment, the only self-supporting foam, such as for walls, roofs or
Similar place insulation
ⅡA fluorocarbon obturator limited bearer
It may be exposed or not exposed to the environment, such as a person can carry stampede deck, etc.
Occasions, you may experience warming or compression creep, etc.
ⅡB
The reaction of water with isocyanate
Carbon dioxide generated
A limited bearing obturator
It may be exposed or not exposed to the environment, such as a person can carry stampede deck, etc.
Occasions, you may experience warming or compression creep, etc.
......
|