|
US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 13454.2-2013: Plastics -- Melamine-formaldehyde powder moulding compounds (MF-PMCs) -- Part 2: Preparation of test specimens and determination of properties
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 13454.2-2013 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Plastics -- Melamine-formaldehyde powder moulding compounds (MF-PMCs) -- Part 2: Preparation of test specimens and determination of properties
| Valid |
GB/T 13454.2-2013
|
PDF similar to GB/T 13454.2-2013
Basic data | Standard ID | GB/T 13454.2-2013 (GB/T13454.2-2013) | | Description (Translated English) | Plastics -- Melamine-formaldehyde powder moulding compounds (MF-PMCs) -- Part 2: Preparation of test specimens and determination of properties | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G32 | | Classification of International Standard | 83.080.20 | | Word Count Estimation | 12,182 | | Quoted Standard | GB/T 1033.1-2008; GB/T 1034-2008; GB/T 1040.1-2006; GB/T 1040.2-2006; GB/T 1043.1-2008; GB/T 1408.1-2006; GB/T 1409-2006; GB/T 1410-2006; GB/T 1634.2-2004; GB/T 1636-2008; GB/T 2035; GB/T 2406.2-2009; GB/T 2407-2008; GB/T 2408-2008; GB/T 2918; GB/T 3398.1 | | Adopted Standard | ISO 14528-2-1999, MOD | | Regulation (derived from) | National Standards Bulletin No. 22 of 2013 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | The standard provides for powdered melamine - sample preparation and test methods formaldehyde molding (MF-PMCs) performance testing. This standard specifies the method for testing the material to be processed and the status of the molding material sample | GB/T 13454.2-2013: Plastics -- Melamine-formaldehyde powder moulding compounds (MF-PMCs) -- Part 2: Preparation of test specimens and determination of properties
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plastics Melamine-formaldehyde powder moulding compounds (MF-PMCs) Part 2. Preparation of test specimens and determination of properties
ICS 83.080.20
G32
National Standards of People's Republic of China
Plastic powdered melamine - formaldehyde molding compounds (MF-PMCs)
Part 2. Sample preparation and determination of properties
Plastics-Melamine-formaldehydepowdermouldingcompounds (MF-PMCs) -
Part 2. Preparationoftestspecimensanddeterminationofproperties
(ISO 14528-2.1999, MOD)
Issued on. 2013-11-12
2014-05-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 13454 "plastic powdered melamine - formaldehyde molding compounds (MF-PMCs)" is divided into three parts.
--- Part 1. Designation system and basis;
--- Part 2. Sample preparation and performance measurement;
--- Part 3. Selected plastic molding requirements.
This section GB/T Part of 213,454.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This part redrafted Law Amendment uses ISO 14528-2.1999 "Plastics powdered melamine - formaldehyde molding compound (MF-
PMCs) - Part 2. Sample preparation and performance testing. "
1999 following technical differences and their causes, the terms of these differences have been involved in the outside by page. This part of ISO 14528-2
Vertical singlet margin position (|) were marked.
--- On normative references, this part has been adjusted technical differences, in order to adapt our technical conditions, the adjusted situation
Focus is reflected in the status of Chapter 2, "Normative references", the specific adjustments are as follows.
• Modify with international standards of GB/T 1636-2008 instead of ISO 14528-2.1999 references ISO 60. 1977
(See Table 2 1.1);
• equivalents adoption of international standards GB/T 1034-2008 instead of ISO 62.2008 (see Table 1, 5.1);
• equivalents adoption of international standards GB/T 1634.2-2004 instead of ISO 75-2.2003 (see Table 1, 3.1);
• Use equivalent to international standards of GB/T 5474-1985 instead of ISO 120. 1977 (see Table 2, 5.1);
• equivalents adoption of international standards GB/T 8324-2008 instead of ISO 171. 1980 (see Table 2, 1.2);
• equivalents adoption of international standards GB/T 9341-2008 instead of ISO 178.2001 (1993) (see Table 2, 2.6);
• equivalents adoption of international standards GB/T 1043.1-2008 instead of ISO 179-1.2000 (see Table 1, 2.8);
• equivalents adoption of international standards GB/T 2918 instead of ISO 291.1997 (see Chapter 5);
• equivalents adoption of international standards GB/T 5471 instead of ISO 295.2004 (see Table 1 1.1,2.1,2.11,3.3,4.
9,5.2,5.3, Table 2 3.1,4.2,4.3 and 4.4);
• equivalents adoption of international standards GB/T 2035 instead of ISO 472.1999 (see Chapter 3);
• equivalents adoption of international standards GB/T 1040.1-2006 instead of ISO 527-1.1993 (see Table 1, 2.1);
• equivalents adoption of international standards GB/T 1040.2-2006 instead of ISO 527-2.1993 (see Table 1, 2.1);
• equivalents adoption of international standards GB/T 11546.1-2008 instead of ISO 899-1.2003 (see Table 1, 2.4);
• equivalents adoption of international standards GB/T 1033.1-2008 instead of ISO 1183; 2004 (see Table 1, 5.3);
• equivalents adoption of international standards GB/T 3398.1-2008 instead of ISO 2039-1.2001 (see Table 2, 2.1);
• equivalents adoption of international standards GB/T 11997-2008 instead of ISO 3167.2002 (see Table 1 2.1,3.4,4.
9,5.3, Table 2, 3.1,4.3 and 4.4);
• with reference to international standards of GB/T 13455-1992 instead of ISO 3671. 1976 (see Table 2, 5.2);
• equivalents adoption of international standards GB/T 2406.2-2009 instead of ISO 4589-2.1996 (see Table 1, 3.11);
• China has GB/T 5009.61-2003 testing methods, alternative ISO 14528-2.1999 is referenced in ISO 4614.
1977 (see Table 2, 5.3);
• Modify with international standards of GB/T 19467.1 instead of ISO 10350-1.1998 (see Chapters 1 and 6);
• equivalents adoption of international standards GB/T 13454.1-2013 instead of ISO 14528-1.1999 (see Chapter 3);
• Due to the absence of a reference to the standard text, delete the ISO 14528-2.1999 references ISO 14528-3.1999;
• Because ISO 15062 in ISO 14528-2.1999 labeled "forthcoming" but not yet published, it is deleted
ISO 15062;
• equivalents adoption of international standards GB/T 1410-2006 instead of IEC 60093. 1980 (see Table 1, 4.5);
• equivalents adoption of international standards GB/T 10064-2006 instead of IEC 60167. 1964 (see Table 2, 4.1);
• equivalents adoption of international standards GB/T 1408.1-2006 instead of IEC 60243-1.1998 (see Table 1, 4.7);
• Modify with international standards of GB/T 1409-2006 instead of IEC 60250. 1969 (see Table 1, 4.1);
• equivalents adoption of international standards GB/T 2408-2008 instead of IEC 60695-11-10.1999 (see Table 1, 3.7);
• equivalents adoption of international standards GB/T 5169.17-2008 instead of IEC 60695-11-20.1999 (see Table 1
3.9);
• equivalents adoption of international standards GB/T 2407-2008 instead of ISO 181. 1981 (see Table 2 3.1).
--- Table 3, 1.2 and 1.3 of the "standard" content "See footnote b" changed to "GB/T 17037.3-2003", so that the standard
Operable;
--- Table 3 4.6 "Test conditions and additional instructions" and "contact with the wire electrode" to "circular electrode" in order to meet the domestic test methods
The technical requirements;
--- Table 3.1 in the "unit" content 4 is amended as "mm"; "test conditions and annotated" content was revised to "horizontal and vertical
Direct method "to meet the technical requirements of domestic test methods;
--- Since the original standard marked forthcoming ISO 15062 has not been published, it is removed in 3.1, "for example, when the filling of the mold cavity
Case, you can use the method specified in ISO 15062 measured minimum torque Ms as a measure basis. "
This part made the following editorial changes.
--- Delete footnote in Chapter 2;
--- Adjust the sequence table.
1) Table 3 to Table 1, and delete table footnote;
2) Table 4 to Table 2;
3) Table 1 to Table 3;
4) Table 2 to Table 4.
--- On the part of the international standard's number was revised;
--- Of a table format has been modified.
This part is proposed by the China Petroleum and Chemical Industry Association.
This part of the National Technical Committee of Standardization Technical Committee plastic thermosetting plastics (SAC/TC15/SC11) centralized.
This section is drafted. Guangdongrongtai Industrial Co., Ltd., Jieyang City, Guangdong Province Quality and Technology Association, provided Chenguang Chemical Research
Design Institute Co., Ltd., Fujian Province Shaxian Hongguang Chemical Co., Ltd. Changshu Southeast plastics, synthetic resin National Quality Supervision and Inspection
center.
Drafters of this section. Lilin Kai, Yang Tiesheng, Chen Dongyang, Song Guirong, Linwei Peng, Wei Yuqing, Chen Yingui, Chen Jiwei, Wei Wei.
Plastic powdered melamine - formaldehyde molding compounds (MF-PMCs)
Part 2. Sample preparation and determination of properties
1 Scope
GB/T 13454 in the provisions of this section for powdered melamine - Preparation of formaldehyde molding compound (MF-PMCs) performance test specimens
Processes and test methods.
This section specifies the method of test material to be treated and the state of the molding material samples to be tested before the pre-test and adjustment requirements.
This section applies to melamine-formaldehyde powder molding compounds (MF-PMCs) and sample preparation procedures and conditions for use of these samples test material
Performance with method also applies to characterize the performance of their testing methods MF-PMCs required.
Performance Project selected generic test method GB/T 19467.1-2004. Some other particularly important or broad MF-PMCs make
Test methods are also included in this part of GB/T 13454, the characteristic performance can be GB/T 13454.1 found in.
In order to obtain comparable and have a reproducible test results should be in accordance with the process of sample preparation and status adjustment method provided herein, specimens
Dimensions and test methods. Using different sample size or sample preparation method of test data may not be consistent.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
1033.1-2008 non-plastic foam density measurement GB/T Part 1. Immersion method, liquid pyknometer method and titration method
(ISO 1183-1.2004, IDT)
GB/T 1034-2008 Plastics Determination of water absorption (ISO 62.2008, IDT)
GB /1040.1-2006 Plastics Determination of tensile properties T Part 1. General (ISO 527-1.1993, IDT)
GB /1040.2-2006 Plastics Determination of tensile properties T - Part 2. Test plastics molding and extrusion conditions (ISO 527-
2.1993, IDT)
GB /1043.1-2008 plastic Charpy impact properties measured T Part 1. Non-instrumented impact test (ISO 179-1.
2000, IDT)
GB/T 1408.1-2006 electrical insulating materials strength test methods - Part 1. Tests at power frequencies (IEC 60243-1.1998, IDT)
GB/T 1409-2006 Measurement of electrical insulating materials at power, audio, high-frequency (including meter wavelengths included) of the permittivity and dielectric loss
Consumption factor recommended method (IEC 60250. 1969, MOD)
GB/T 1410-2006 solid insulating material volume resistivity and surface resistivity test methods (IEC 60093. 1980, IDT)
GB/T 1634.2-2004 Determination of plastic deflection temperature under load - Part 2. Plastics, ebonite and long-fiber-reinforced composite materials
Material (ISO 75-2.2003, IDT)
GB/T 1636-2008 Determination of plastic material from a predetermined apparent density of the outflow funnel (ISO 60. 1977, MOD)
GB/T 2035 plastic terms and their definitions (GB/T 2035-2008, ISO 472.1999, IDT)
GB/T 2406.2-2009 Plastics - Determination of burning behavior by oxygen index Part 2 Method. room temperature test (ISO 4589-2.1996, IDT)
GB/T 2407-2008 Determination of plastic rigid plastic when small specimens in contact with a hot rod combustion characteristics (ISO 181. 1981, IDT)
GB/T 2408-2008 Plastics - Determination of burning behavior of horizontal and re-direct methods (IEC 60695-11-10.1999, IDT)
GB/T 2918 standard plastic sample conditioning and environmental tests (GB/T 2918-1998, idt ISO 291.1997)
GB/T 3398.1-2008 Plastics - Determination of hardness - Part 1. Ball indentation method (ISO 2039-1.2001, IDT)
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13454.2-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 13454.2-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 13454.2-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13454.2-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|