|
Std ID |
Description (Standard Title) |
|
GB/T 32967.1-2016
|
Metallic materials -- Torsional test method at high strain rates -- Part 1: Method of test at room temperature
|
|
GB/T 33163-2016
|
Metallic materials -- Residual stress -- With ultrasonic impact treatment
|
|
GB/T 33362-2016
|
Metallic materials -- Conversion of hardness values
|
|
GB/T 5027-2016
|
Metallic materials -- Sheet and strip -- Determination of plastic strain ratio
|
|
GB/T 228.2-2015
|
Metallic materials -- Tensile testing -- Part 2: Method of test at elevated temperature
|
|
GB/T 31930-2015
|
Metallic materials -- Ductility testing -- Compression test for porous and cellular metals
|
|
GB/T 4337-2015
|
Metallic materials -- Fatigue testing -- Rotating bar bending method
|
|
GB/T 8358-2014
|
Steel wire ropes -- Determination of measured breaking force
|
|
GB/T 17394.1-2014
|
Metallic materials - Leeb hardness test - Part 1: Test method
|
|
GB/T 17394.4-2014
|
Metallic materials - Leeb hardness test - Part 4: Tables of hardness values conversation
|
|
GB/T 21143-2014
|
Metallic materials -- Unified method of test for determination of quasi-static fracture toughness
|
|
GB/T 31093-2014
|
Test method for stress of monocrystalline sapphire ingot
|
|
GB/T 31218-2014
|
Metallic materials -- Determination of residual stress -- Sectioning relaxation strain-gage method
|
|
GB/T 31310-2014
|
Metallic material -- Determination of residual stress -- Hole drilling strain-gauge method
|
|
GB/T 4341.1-2014
|
Metallic materials -- Shore hardness test -- Part 1: Test method
|
|
GB/T 16865-2013
|
Test pieces and method for tensile test for wrought aluminium and magnesium alloys products
|
|
GB/T 10120-2013
|
Metallic materials -- Tensile stress relaxation -- Method of test
|
|
GB/T 29515-2013
|
Cold rolled steel sheet for enameling -- Fish-scaling sensitivity test -- Hydrogen permeation method
|
|
GB/T 30064-2013
|
Metallic materials -- Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
|
|
GB/T 30069.1-2013
|
Metallic materials -- Tensile testing at high strain rates -- Part 1: Elastic-bar-type systems
|
|
GB/T 29459.1-2012
|
Small punch test methods of metallic materials for in-service pressure equipment - Part 1: General requirements
|
|
GB/T 29459.2-2012
|
Small punch test methods of metallic materials for in-service pressure equipment - Part 2: Method of test for tensile properties at room temperature
|
|
GB/T 2039-2012
|
Metallic materials -- Uniaxial creep testing method in tension
|
|
GB/T 239.1-2012
|
Metallic materials -- Wire -- Part 1: Simple torsion test
|
|
GB/T 28289-2012
|
Test methods for composite performances of aluminium alloy thermal barrier profiles
|
|
GB/T 28896-2012
|
Metallic Materials -- Method of test for the determination of quasi-static fracture toughness of welds
|
|
GB/T 228.1-2010
|
Metallic materials -- Tensile testing -- Part 1: Method of test at room temperature
|
|
GB/T 14984.1-2010
|
Ferroalloys -- Vocabulary -- Part 1: Materials
|
|
GB/T 14984.2-2010
|
Ferroalloys -- Vocabulary -- Part 2: Sampling and sample preparation
|
|
GB/T 14984.3-2010
|
Ferroalloys -- Vocabulary -- Part 3: Sieve analysis
|
|
GB/T 26076-2010
|
Metal sheets and strips -- Axial-force-controlled fatigue testing method
|
|
GB/T 26077-2010
|
Metallic materials -- Fatigue testing -- Axial-strain-controlled method
|
|
GB/T 26078-2010
|
Metallic materials -- Welding residual stresses -- Method with explosion treatment
|
|
GB/T 231.1-2009
|
Metallic materials -- Brinell hardness test -- Part 1: Test method
|
|
GB/T 18449.1-2009
|
Metallic materials -- Knoop hardness test -- Part 1: Test method
|
|
GB/T 18449.4-2009
|
Metallic materials -- Knoop hardness test -- Part 4: Tables of hardness values
|
|
GB/T 230.1-2009
|
Metallic materials -- Rockwell hardness test -- Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)
|
|
GB/T 231.4-2009
|
Metallic materials -- Brinell hardness test -- Part 4: Tables of hardness values
|
|
GB/T 24171.1-2009
|
Metallic materials -- Sheet and strip -- Determination of forming limit curves -- Part 1: Measurement and application of forming limit diagrams in press shop
|
|
GB/T 24171.2-2009
|
Metallic materials -- Sheet and strip -- Determinations of forming limit curves -- Part 2: Determinations of forming limit curves in laboratory
|
|
GB/T 24172-2009
|
Method for evaluation of tensile properties of metallic superplastic materials
|
|
GB/T 24173-2009
|
Steel sheets -- Secondary work embrittlement testing method
|
|
GB/T 24174-2009
|
Steel -- Determination of Bake-Hardening-Index (BH2)
|
|
GB/T 24176-2009
|
Metallic materials -- Fatigue testing -- Statistical planning and analysis of data
|
|
GB/T 24179-2009
|
Metallic materials -- Residual stress determination -- The indentation strain-gage method
|
|
GB/T 24182-2009
|
Mechanical testing of metals -- Symbols and definitions in published standard
|
|
GB/T 24183-2009
|
Metallic materials -- Earing test
|
|
GB/T 24185-2009
|
Test method for measurement of hydrogen embrittlement threshold in steel by the incremental step loading method
|
|
GB/T 24522-2009
|
Metallic materials -- Method of test for the determination of resistance to stable crack extension using specimens of low constraint
|
|
GB/T 24523-2009
|
Test method for rapid indentation (Brinell) hardness testing of metallic materials
|
|
GB/T 24524-2009
|
Metallic materials -- Sheet and strip -- Hole expanding test
|
|
GB/T 24584-2009
|
Metallic materials -- Tensile testing -- Method of test in liquid helium
|
|
GB/T 4340.1-2009
|
Metallic materials -- Vickers hardness test -- Part 1: Test method
|
|
GB/T 4340.4-2009
|
Metallic materials -- Vickers hardness test -- Part 4: Tables of hardness values
|
|
GB/T 12347-2008
|
Steel wire ropes -- Bending fatigue testing
|
|
GB/T 12778-2008
|
Determination of Charpy impact fracture surface for metallic materials
|
|
GB/T 15248-2008
|
The test method for axial loading constant-amplitude low-cycle fatigue of metallic materials
|
|
GB/T 21838.1-2008
|
Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 1: Test method
|
|
GB/T 21838.4-2008
|
Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 4: Test method for metallic and non-metallic coatings
|
|
GB/T 22315-2008
|
Metallic materials -- Determination of modulus of elasticity and Poisson ratio
|
|
GB/T 22565-2008
|
Metallic materials -- Sheet and strip -- Method for spring back evaluation in stretch bending
|
|
GB/T 3075-2008
|
Metallic materials -- Fatigue testing -- Axial-force-controlled method
|
|
GB/T 10623-2008
|
Metallic material -- Mechanical testing -- Vocabulary
|
|
GB/T 4337-2008
|
Metallic materials -- Fatigue testing -- Rotating bar bending method
|
|
GB/T 5028-2008
|
Metallic materials -- Sheet and strip -- Determination of tensile strain hardening exponent
|
|
GB/T 5125-2008
|
Method for deep drawing cups testing of non-ferrous metals
|
|
GB/T 6396-2008
|
Clad steel plates -- Mechanical and technological test
|
|
GB/T 6803-2008
|
Test method for drop-weight test to determine nil-ductility transition temperature of ferritic steels
|
|
GB/T 7732-2008
|
Metallic materials -- Fracture toughness testing method with surface crack tension specimens
|
|
GB/T 4161-2007
|
Metallic materials -- Determination of plane-strain fracture toughness
|
|
GB/T 229-2007
|
Metallic materials -- Charpy pendulum impact test method
|
|
GB/T 12443-2007
|
Metallic materials -- Torsional stress fatigue testing method
|
|
GB/T 10128-2007
|
Metallic materials -- Torsion test at ambient temperature
|
|
GB/T 20832-2007
|
Metallic materials -- Designation of test specimen axes in relation to product texture
|
|
GB/T 21143-2007
|
Metallic materials -- Unified method of test for determination of quasi-static fracture toughness
|
|
GB/T 3250-2007
|
Aluminium and aluminium alloys shear test method for rivet wire and rivets and riveting test method for rivet wire
|
|
GB/T 5027-2007
|
Metallic materials -- Sheet and strip -- Determination of plastic strain ratio
|
|
GB/T 5482-2007
|
Test method of metallic materials -- Dynamic tear
|
|
GB/T 6400-2007
|
Metallic materials -- Shear test method for wires and rivets
|
|
GB/T 8363-2007
|
Test method for drop -- Weight tear tests of steel products
|
|
GB/T 12444-2006
|
Metallic materials -- Wear test method -- Block-on-ring sliding wear test
|
|
GB/T 13239-2006
|
Metallic materials -- Tensile testing at low temperature
|
|
GB/T 20568-2006
|
Metallic materials -- Tube ring hydraulic pressure test
|
|
GB/T 3251-2006
|
Compression test method for aluminium and aluminium alloys tubes
|
|
GB/T 4338-2006
|
Metallic materials -- Tensile testing at elevated temperature
|
|
GB/T 8358-2006
|
Breaking rope tensile test method
|
|
GB/T 16825.2-2005
|
Verification of static uniaxial testing machines -- Part 2: Tension creep testing machines -- Verification of the applied force
|
|
GB/T 19744-2005
|
Determining plane-strain crack-arrest fracture toughness, KIa, of ferritic steels
|
|
GB/T 19748-2005
|
Steel -- Charpy V-notch pendulum impact test -- Instrumented test method
|
|
GB/T 7314-2005
|
Metallic materials -- Compression testing at ambient temperature
|
|
GB/T 230.1-2004
|
Metallic Rockwell hardness test -- Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)
|
|
GB/T 4160-2004
|
Steel-strain ageing sensibility test (Charpy impact method)
|
|
GB/T 228-2002
|
Metallic materials -- Tensile testing at ambient temperature
|
|
GB/T 16825.1-2002
|
Verification of static uniaxial testing machines -- Part 1: Tension/compression testing machines -- Verification and calibration of the force-measuring system
|
|
GB/T 230.2-2002
|
Metallic Rockwell hardness test -- Part 2: Verification and calibration of hardness testers (scales A, B, C, D, E, F, G, H, K, N, T)
|
|
GB/T 230.3-2002
|
Metallic Rockwell hardness test -- Part 3: Calibration of hardness reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)
|
|
GB/T 231.1-2002
|
Metallic materials -- Brinell hardness test -- Part 1: Test method
|
|
GB/T 231.2-2002
|
Metallic Brinell hardness test -- Part 2: Verification and calibration of hardness testers
|
|
GB/T 231.3-2002
|
Metallic Brinell hardness test -- Part 3: Calibration of hardness reference blocks
|
|
GB/T 238-2002
|
Metallic materials – Wire -- Reverse bend test
|