|
US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26076-2010: Metal sheets and strips -- Axial-force-controlled fatigue testing method
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 26076-2010 | English | 209 |
Add to Cart
|
3 days [Need to translate]
|
Metal sheets and strips -- Axial-force-controlled fatigue testing method
| Valid |
GB/T 26076-2010
|
PDF similar to GB/T 26076-2010
Basic data | Standard ID | GB/T 26076-2010 (GB/T26076-2010) | | Description (Translated English) | Metal sheets and strips -- Axial-force-controlled fatigue testing method | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | H22 | | Classification of International Standard | 77.040.10 | | Word Count Estimation | 9,989 | | Date of Issue | 1/10/2011 | | Date of Implementation | 10/1/2011 | | Quoted Standard | GB/T 3075; GB/T 3505; GB/T 16825.1; GB/T 25917 | | Regulation (derived from) | Announcement of Newly Approved National Standards 2011 No. (No. 166 overall) 1 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Standard specifies room temperature under a metal sheet (with) the sample (without introducing stress concentration) axial force controlled fatigue testing terms and definitions, sample, test conditions, test procedures and test results, said the report. This Standard is applicable to a thickness of 0. 3mm ~ 3mm sheet metal (with) the sample (not including notched specimen) to withstand any type shown in Figure 1, the axial load fatigue testing constant amplitude cyclic stress; specimens of rectangular cross Minimum cross sectional area less than 30m per square. | GB/T 26076-2010: Metal sheets and strips -- Axial-force-controlled fatigue testing method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Metal sheets and strips. Axial-force-controlled fatigue testing method
ICS 77.040.10
H22
National Standards of People's Republic of China
Sheet metal (strip)
Fatigue Test Method for controlling axial force
Issued on. 2011-01-10
2011-10-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
The standard proposed by China Iron and Steel Association.
This standard is under the jurisdiction of the National Steel Standardization Technical Committee.
This standard is drafted by. Beijing North Ye Functional Materials Co., Ltd., Wuhan Iron and Steel (Group) Corporation, Metallurgical Industry Information Standards Institute
Study hospital.
The main drafters of this standard. LI Li-min, Li Xin, IRON Dong Li, Ni Xingtao.
Sheet metal (strip)
Fatigue Test Method for controlling axial force
1 Scope
This standard specifies the metal sheet (strip) samples at room temperature (without introducing stress concentration) axial force control terms and definitions fatigue test,
Sample, test conditions, test procedures, and test results are shown reports.
This standard applies to a thickness of 0.3mm ~ 3mm sheet metal (with) a sample (not including notched specimens) bear either shown in Figure 1
Type constant axial load stress amplitude cyclic fatigue tests; minimum cross-sectional area of \u200b\u200bthe sample rectangular cross-section less than 30mm2.
σm --- mean stress;
σa --- stress amplitude;
R --- stress ratio.
Type 1 cyclic stress
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 3075 metal fatigue test axial force control method (GB/T 3075-2008, ISO 1099.2006, MOD)
GB/T 3505 Geometrical Product Specifications Surface texture Profile method and parameters of surface structure Definition (GB/T 3505-
2000, eqv ISO 4287.1997, GeometricalProductSpecification (GPS) -Surfacetexture. Profilemethod-
terms, definitionsandsurfacetextureparameters.)
Inspection and correction tension and (or) pressure testing machine force measuring system. GB/T 16825.1 of static uniaxial testing machines - Part 1
Associate (GB/T 16825.1-2008, ISO 7500-1.2004, IDT)
GB/T 25917 axial loading fatigue testing machine dynamic force calibration
3 Terms and Definitions
GB/T 3075 and established the following terms and definitions apply to this standard.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 26076-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 26076-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 26076-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 26076-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|