|
Std ID |
Description (Standard Title) |
|
GB/T 4825.1-1984
|
Test method for partial discharge of conductors on printed boards
|
|
GB/T 4825.2-1984
|
Test method for current carrying capacity of conductors on printed boards
|
|
GB/T 1360-1978
|
Printed circuits--Grides system
|
|
GB/T 11313.201-2018
|
Radio-frequency connectors -- Part 201: Electrical test methods -- Reflection coefficient and voltage standing wave ratio
|
|
GB/T 11313.202-2018
|
Radio-frequency connectors -- Part 202: Electrical test methods -- Insertion loss
|
|
GB/T 17738.1-1999
|
Radio-frequency and coaxial cable assemblies. Part 1: Generic specification. General requirements and test methods
|
|
GB/T 15867-1995
|
Radio frequency and coaxial cable assemblies. Part 4: Sectional specification for semi-rigid coaxial cable assemblies
|
|
GB/T 15285-1994
|
Sectional specification for leaky coaxial cables
|
|
GB/T 12269-1990
|
Generic specification for radio-frequency cables
|
|
GB/T 11323-1989
|
General requirements and tests for single-unit coaxial cables for use in cabled distribution systems
|
|
GB/T 9023-1988
|
Methods of measurement of screening efficiency for radio-frequency coaxial cables (Test method for transfer impedance)
|
|
GB/T 7556-1987
|
General characteristics complying with the network performance objectives for 60 channel carrier telephone systems on symmetric cable pairs
|
|
GB/T 7557-1987
|
General characteristics complying with the network performance objectives for 300 channel carrier telephone systems on standardized 1. 2/4. 4mm coaxial cable pairs
|
|
GB/T 6643-1986
|
General purpose rigid coaxial transmission lines and their associated flange connectors. Generic specification
|
|
GB/T 4098.10-1983
|
Test method of dimensional stability for radio-frequency cables
|
|
GB/T 4098.1-1983
|
Test method of corona for radio-frequency cables
|
|
GB/T 4098.2-1983
|
Methods for measurement of capacitance and capacitance unbalance for radio-frequency cables
|
|
GB/T 4098.3-1983
|
Methods of measurement of characteristic impedance for radio-frequency cables
|
|
GB/T 4098.4-1983
|
Methods of measurement of attenuation constant for radio-frequency cables
|
|
GB/T 4098.5-1983
|
Test method of capacitance stability for radio-frequency cables
|
|
GB/T 4098.6-1983
|
Test method of attenuation stability for radio-frequency cables
|
|
GB/T 4098.7-1983
|
Test method of high-temperature for radio-frequency cables
|
|
GB/T 4098.8-1983
|
Test method of low-temperature for radio-frequency cables
|
|
GB/T 4098.9-1983
|
Test method of flow for radio-frequency cables
|
|
GB/T 17737.10-2024
|
Coaxial communication cables - Part 10: Sectional specification for semi-rigid cables with fluoropolymer dielectric
|
|
GB/T 17737.11-2024
|
Coaxial communication cables - Part 11: Sectional specification for semi-rigid cables with polyethylene(PE) dielectric
|
|
GB/T 17737.113-2024
|
Coaxial communication cables - Part 1-113: Electrical test methods - Test for attenuation constant
|
|
GB/T 17737.119-2024
|
Coaxial communication cables - Part 1-119: Electrical test methods - RF power for coaxial cables and cable assemblies
|
|
GB/T 17737.9-2024
|
Coaxial communication cables - Part 9: Sectional specification for flexible RF coaxial cables
|
|
GB/T 17737.801-2022
|
Coaxial communication cables - Part 8-1: Blank detail specification for semi-flexible cables with polytetrafluoroethylene(PTFE) dielectric
|
|
GB/T 17737.8-2022
|
Coaxial communication cables - Part 8: Sectional specification for semi-flexible cables with polytetrafluoroethylene (PTFE) dielectric
|
|
GB/T 21021.1-2021
|
Intermodulation level measurement for passive RF and microwave devices - Part 1: General requirements and measuring methods
|
|
GB/T 21021.2-2021
|
Intermodulation level measurement for passive RF and microwave devices - Part 2: Measurement of passive intermodulation in coaxial cable assemblies
|
|
GB/T 21021.3-2021
|
Intermodulation level measurement for passive RF and microwave devices - Part 3: Measurement of passive intermodulation in coaxial connectors
|
|
GB/T 21021.4-2021
|
Intermodulation level measurement for passive RF and microwave devices - Part 4: Measurement of passive intermodulation in coaxial cables
|
|
GB/T 31723.412-2021
|
Metallic communication cable test methods - Part 4-12: Electromagnetic compatibility (EMC) - Coupling attenuation or screening attenuation of connecting hardware - Absorbing clamp method
|
|
GB/T 31723.413-2021
|
Metallic communication cable test methods - Part 4-13: Electromagnetic compatibility (EMC) - Coupling attenuation of links and channels(laboratory conditions) - Absorbing clamp method
|
|
GB/T 31723.414-2021
|
Metallic communication cable test methods - Part 4-14: Electromagnetic compatibility (EMC) - Coupling attenuation of cable assemblies (field conditions) - Absorbing clamp method
|
|
GB/T 17737.100-2018
|
Coaxial communication cables -- Part 1-100: Electrical test methods -- General requirements
|
|
GB/T 17737.101-2018
|
Coaxial communication cables -- Part 1-101: Electrical test methods -- Test for conductor d.c. resistance of cable
|
|
GB/T 17737.102-2018
|
Coaxial communication cables -- Part 1-102: Electrical test methods -- Test for insulation resistance of cable dielectric
|
|
GB/T 17737.103-2018
|
Coaxial communication cables -- Part 1-103: Electrical test methods -- Test for capacitance of cable
|
|
GB/T 17737.104-2018
|
Coaxial communication cables -- Part 1-104: Electrical test methods -- Test for capacitance stability of cable
|
|
GB/T 17737.105-2018
|
Coaxial communication cables -- Part 1-105: Electrical test methods -- Test for withstand voltage of cable dielectric
|
|
GB/T 17737.106-2018
|
Coaxial communication cables -- Part 1-106: Electrical test methods -- Test for withstand voltage of cable sheath
|
|
GB/T 17737.108-2018
|
Coaxial communication cables -- Part 1-108: Electrical test methods -- Test for characteristic impedance, phase and group delay, electrical length and propagation velocity
|
|
GB/T 17737.112-2018
|
Coaxial communication cables -- Part 1-112: Electrical test methods -- Test for return loss (uniformity of impedance)
|
|
GB/T 17737.115-2018
|
Coaxial communication cables -- Part 1-115: Electrical test methods -- Test for regularity of impedance (pulse/step function return loss)
|
|
GB/T 17737.122-2018
|
Coaxial communication cables -- Part 1-122: Electrical test methods -- Test for crosstalk between coaxial cables
|
|
GB/T 17737.200-2018
|
Coaxial communication cables -- Part 1-200: Environmental test methods -- General requirements
|
|
GB/T 17737.203-2018
|
Coaxial communication cables -- Part 1-203: Environmental test methods -- Test for water penetration of cable
|
|
GB/T 17737.205-2018
|
Coaxial communication cables -- Part 1-205: Environmental test methods -- Resistance to solvents and contaminating fluids
|
|
GB/T 17737.301-2018
|
Coaxial communication cables -- Part 1-301: Mechanical test methods -- Test for ovality
|
|
GB/T 17737.308-2018
|
Coaxial communication cables -- Part 1-308: Mechanical test methods -- Test for tensile strength and elongation for copper-clad metals
|
|
GB/T 17737.310-2018
|
Coaxial communication cables -- Part 1-310: Mechanical test methods -- Test for torsion characteristics of copper-clad metals
|
|
GB/T 17737.314-2018
|
Coaxial communication cables -- Part 1-314: Mechanical test methods -- Test for cable bending
|
|
GB/T 17737.316-2018
|
Coaxial communication cables -- Part 1-316: Mechanical test methods -- Test for maximum pulling force of cable
|
|
GB/T 17737.317-2018
|
Coaxial communication cables -- Part 1-317: Mechanical test methods -- Test for crush resistance of cable
|
|
GB/T 17737.318-2018
|
Coaxial communication cables -- Part 1-318: Mechanical test methods -- Heat performance tests
|
|
GB/T 17737.324-2018
|
Coaxial communication cables -- Part 1-324: Mechanical test methods -- Test for abrasion resistance of cable
|
|
GB/T 17737.325-2018
|
Coaxial communication cables -- Part 1-325: Mechanical test methods -- Aeolian vibration
|
|
GB/T 17737.107-2018
|
Coaxial communication cables -- Part 1-107: Electrical test methods -- Test for cable microphone charge level (mechanically induced noise)
|
|
GB/T 17737.302-2018
|
Coaxial communication cables -- Part 1-302: Mechanical test methods -- Test for eccentricity
|
|
GB/T 31723.411-2018
|
Metallic communication cable test methods -- Part 4-11: Electromagnetic compatibility (EMC) -- Coupling attenuation or screening attenuation of patch cords, coaxial cable assemblies, pre-connectorized cables -- Absorbing clamp method
|
|
GB/T 17737.201-2015
|
Coaxial communication cables -- Part 1-201: Environmental test methods -- Test for cold bend performance of cable
|
|
GB/T 17737.313-2015
|
Coaxial communication cables -- Part 1-313: Mechanical test methods -- Adhesion of dielectric and sheath
|
|
GB/T 31723.405-2015
|
Metallic communication cable test methods -- Part 4-5: Electromagnetic compatibility (EMC) -- Coupling or screening attenuation -- Absorbing clamp method
|
|
GB/T 31723.406-2015
|
Metallic communication cable test methods -- Part 4-6: Electromagnetic compatibility (EMC) -- Surface transfer impedance -- Line injection method
|
|
GB/T 11322.1-2013
|
Radio frequency cables -- Part 0: Guide to the design of detail specifications -- Section 1: Coaxial cables
|
|
GB/T 14864-2013
|
Solid-polyethene insulated flexible radio-frequency cables
|
|
GB/T 17737.1-2013
|
Coaxial communication cables -- Part 1: Generic specification -- General, definitions and requirements
|
|
GB/T 17737.4-2013
|
Coaxial communication cables -- Part 4: Sectional specification for leaky cables
|
|
GB/T 17737.5-2013
|
Coaxial communication cables -- Part 5: Sectional specification for CATV trunk and distribution cables
|
|
GB/T 17738.1-2013
|
Radio frequency and coaxial cable assemblies -- Part 1: Generic specification -- General requirements and test methods
|
|
GB/T 17738.2-2013
|
Radio frequency and coaxial cable assemblies -- Part 2: Sectional specification for flexible coaxial cable assemblies
|
|
GB/T 17738.3-2013
|
Radio frequency and coaxial cable assemblies -- Part 3: Sectional specification for semi-flexible coaxial cable assemblies
|
|
GB/T 17738.4-2013
|
Radio frequency and coaxial cable assemblies -- Part 4: Sectional specification for semi-rigid coaxial cable assemblies
|
|
GB/T 29197-2012
|
Copper-clad aluminum wire
|
|
GB/T 17737.3-2001
|
Radio frequency cables -- Part 3: Sectional specification for coaxial cables for local area networks
|
|
GB/T 17737.1-2000
|
RF cables - Part 1: Generic specification - General, definitions, requirements and test methods
|
|
GB/T 17737.2-2000
|
Radio-frequency cables. Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation
|
|
GB/T 17737.1-1999
|
Radio-frequency cables. Part 1: Generic specification. Section 1: Definitions and requirements
|
|
GB/T 13415-1992
|
Mixers, radio frequency, general specification for
|
|
GB/T 13416-1992
|
Switches (coaxial), RF transmission line, general specification for
|
|
GB/T 12774-1991
|
General specification for coaxial line electrical dummy loads
|
|
GB/T 11321-1989
|
Guide for choosing modular dimensions for waveguide components
|
|
GB/T 11449.1-1989
|
Flanges for waveguides. Part 1: General requirements
|
|
GB/T 11449.2-1989
|
Flanges for waveguides. Part 2: Relevant specification for flanges for ordinary rectangular waveguides
|
|
GB/T 11449.3-1989
|
Flanges for waveguides. Part 3: Relevant specification for flanges for flat rectangular waveguides
|
|
GB/T 11449.4-1989
|
Flanges for waveguides. Part 4: Relevant specification for flanges for circular waveguides
|
|
GB/T 11449.5-1989
|
Flanges for waveguides. Part 6: Relevant specification for flanges for medium flat rectangular waveguides
|
|
GB/T 11449.6-1989
|
Flanges for waveguides. Part 7: Relevant specification for flanges for square waveguides
|
|
GB/T 11450.1-1989
|
Hollow metallic waveguides. Part 1: General requirement and measuring methods
|
|
GB/T 11450.2-1989
|
Hollow metallic waveguides. Part 2: Relevant specifications for ordinary rectangular waveguides
|
|
GB/T 11450.3-1989
|
Hollow metallic waveguides. Part 3: Relevant specifications for flat rectangular waveguides
|
|
GB/T 11450.4-1989
|
Hollow metallic waveguides. Part 4: Relevant specifications for circular waveguides
|
|
GB/T 11450.5-1989
|
Hollow metallic waveguides. Part 6: Relevant specifications for medium flat rectangular waveguides
|
|
GB/T 11450.6-1989
|
Hollow metallic waveguides. Part 7: Relevant specifications for square waveguides
|
|
GB/T 11451-1989
|
Flexible waveguide assembly performance
|
|
GB/T 21711.10-2025
|
Electromechanical elementary relays - Part 10: Additional functional aspects and safety requirements for high-capacity relays
|