|
US$199.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 17737.801-2022: Coaxial communication cables - Part 8-1: Blank detail specification for semi-flexible cables with polytetrafluoroethylene(PTFE) dielectric
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 17737.801-2022 | English | 199 |
Add to Cart
|
3 days [Need to translate]
|
Coaxial communication cables - Part 8-1: Blank detail specification for semi-flexible cables with polytetrafluoroethylene(PTFE) dielectric
| Valid |
GB/T 17737.801-2022
|
PDF similar to GB/T 17737.801-2022
Basic data | Standard ID | GB/T 17737.801-2022 (GB/T17737.801-2022) | | Description (Translated English) | Coaxial communication cables - Part 8-1: Blank detail specification for semi-flexible cables with polytetrafluoroethylene(PTFE) dielectric | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L26 | | Word Count Estimation | 10,180 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 17737.801-2022: Coaxial communication cables - Part 8-1: Blank detail specification for semi-flexible cables with polytetrafluoroethylene(PTFE) dielectric
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 33.120.10
CCSL26
National Standards of People's Republic of China
Coaxial Communication Cables Part 8-1.Polytetrafluoroethylene
Blank detail specification for insulated semi-flexible cables
(IEC 61196-8-1.2012, MOD)
Published on 2022-03-09
2022-10-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"
drafted.
This document is part 8 of GB/T 17737 "Coaxial Communication Cables". GB/T 17737 has published the following parts.
--- Part 1.General Specifications General Principles, Definitions and Requirements.
● Part 1-100.General Requirements for Electrical Test Methods;
● Part 1-101.Electrical test method Conductor DC resistance test;
● Part 1-102.Electrical test method Cable dielectric insulation resistance test;
● Part 1-103.Electrical test method Capacitance test of cables;
● Part 1-104.Electrical Test Methods Capacitance Stability Test of Cables;
● Part 1-105.Electrical test methods for the withstand voltage test of cable media;
● Part 1-106.Electrical test methods for the withstand voltage test of cable jackets;
● Part 1-107.Electrical Test Methods Cable Microphonic Charge Level (Mechanical Induced Noise) Test;
● Part 1-108.Electrical Test Methods Characteristic Impedance, Phase Delay, Group Delay, Electrical Length and Propagation Velocity Tests;
● Part 1-112.Electrical Test Methods Return Loss (Impedance Consistency) Test;
● Part 1-115.Electrical Test Methods Impedance Uniformity (Pulse/Step Function Return Loss) Test;
● Part 1-122.Electrical test methods for crosstalk between coaxial cables;
● Part 1-200.General Requirements for Environmental Test Methods;
● Part 1-201.Environmental test method for cold bending performance test of cables;
● Part 1-203.Environmental test methods for water seepage test of cables;
● Part 1-205.Environmental Test Methods Solvent Resistance and Contaminated Liquid Test;
● Part 1-301.Mechanical Test Methods Ovality Test;
● Part 1-302.Mechanical Test Method Eccentricity Test;
● Part 1-308.Mechanical test methods for tensile strength and elongation of copper-clad metals;
● Part 1-310.Mechanical test methods for torsional properties of copper-clad metals;
● Part 1-313.Mechanical Test Methods for Adhesion of Media and Sheathing;
● Part 1-314.Mechanical test methods for bending test of cables;
● Part 1-316.Mechanical test method Maximum tensile force test of cables;
● Part 1-317.Mechanical Test Methods Cable Compression Test;
● Part 1-318.Mechanical Test Methods Thermal Performance Test;
● Part 1-324.Mechanical Test Methods Cable Abrasion Test;
● Part 1-325.Mechanical test methods Wind-induced vibration test.
--- Part 2.Polytetrafluoroethylene (PTFE) insulated semi-rigid radio frequency coaxial cable sub-specification;
--- Part 3.Sub-specification for coaxial cables for local area networks;
--- Part 4.Sub-specification for leaky cables;
--- Part 5.Sub-specification for trunk and distribution cables for CATV;
--- Part 8.PTFE insulated semi-flexible cable sub-specification.
● Part 8-1.Blank detail specification for PTFE insulated semi-flexible cables;
This document uses the redrafted method to modify the use of IEC 61196-8-1.2012 "Coaxial Communication Cables Part 8-1.Polytetrafluoroethylene Insulation
Blank Detail Specification for Edge Semi-Flexible Cables.
The structure of this document has been adjusted compared to IEC 61196-8-1.2012.Due to the addition of Chapter 3 in accordance with the requirements of GB/T 1.1-2020
"Terms and Definitions", resulting in the extension of subsequent chapter numbers.
The technical differences between this document and IEC 61196-8-1.2012 and their reasons are as follows.
--- Regarding normative reference documents, this document has made adjustments with technical differences to adapt to the technical conditions of our country and the adjustment situation
Centrally reflected in Chapter 2 "Normative References", the specific adjustments are as follows.
● Replace IEC 61196-1 with GB/T 17737.1-2013 which is equivalent to adopting international standards;
● Replacing IEC 61196-8 with GB/T 17737.8-2022, which adopts the international standard;
● Replace IEC 62037-1 with GB/T 21021.1-2021 which is equivalent to adopting international standards;
● Replace IEC 62037-4 with GB/T 21021.4-2021 which is equivalent to adopting international standards.
--- Deleted the frequency range 500MHz~18GHz in Chapter 1 to improve operability;
--- Change "NS (not specified)" to "A (when applicable)" to adapt to domestic customs and avoid ambiguity;
---According to GB/T 17737.8-2022, Chapter 4 was revised, and "inner conductor continuity", "phase consistency (when required)" and "resistance" were added.
Stress cracking (applicable to FEP sheathed cables)" "Temperature Shock", changed "Average Characteristic Impedance" to "Characteristic Impedance", revised "Conductor"
"Adhesion", "Bendability", "Repetitive Bending" and "Cable Tensile Resistance (Longitudinal Tensile)" requirements, delete "Impedance Consistency".
The following editorial changes have been made to this document.
--- In accordance with the requirements of GB/T 1.1-2020, the preparation of the "Scope" chapter is standardized.
Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents.
This document is proposed by the Ministry of Industry and Information Technology of the People's Republic of China.
This document is under the jurisdiction of the National Standardization Technical Committee of High Frequency Cables and Connectors for Electronic Equipment (SAC/TC190).
This document was drafted by. Jiangsu Tongguang Electronic Cable Co., Ltd., China Electronics Standardization Institute.
The main drafters of this document. Chen Hui, Wu Zhengping, Ding Chunfeng, Tian Xin.
Introduction
Coaxial cables are widely used in mobile communication systems and other communication systems such as radar and satellite.
With the advantages of strong capability, compact size and wide temperature range, it plays an important role in the transmission of communication signals in the communication system. GB/T 17737 is
The coaxial communication cable series product standard and test method standard are intended to consist of the following 11 parts.
--- Part 1.General Specifications General Principles, Definitions and Requirements. The purpose is to establish the general principles and definitions of coaxial cable design and test methods
and requirements.
--- Part 3.Sub-specification of coaxial cables for local area networks. The purpose is to establish the characteristics and versatility of coaxial communication cables for local area networks
performance requirements, quality assessment procedures, test and test methods, and recommended ratings.
--- Part 4.Leaky cable sub-specification. The purpose is to establish the characteristics and general performance requirements, quality evaluation of leaky coaxial communication cables.
procedures, test and test methods, and recommended ratings.
--- Part 5.Sub-specification of trunk and distribution cables for CATV. The purpose is to establish for CATV trunk and CATV distribution
Characteristics and general performance requirements, quality assessment procedures, test and test methods, and recommended ratings for coaxial communication cables.
--- Part 6.CATV drop-in cable sub-specification. The purpose is to establish the characteristics and general use of CATV drop-in coaxial communication cables
Performance requirements, quality assessment procedures, test and test methods, and recommended ratings.
--- Part 7.Cable sub-specification for BCT. The purpose is to establish the characteristics and general performance requirements of coaxial communication cables for BCT,
Quality assessment procedures, test and test methods, and recommended ratings.
--- Part 8.Sub-specification for PTFE insulated semi-flexible cables. The purpose is to establish PTFE insulated semi-soft coaxial communication
Cable characteristics and general performance requirements, quality assessment procedures, test and test methods, and recommended ratings.
● Part 8-1.Blank detail specification for PTFE insulated semi-flexible cables. The purpose is to establish PTFE insulating semi-flexible
Format and requirements for a detailed specification for flexible coaxial communication cables.
--- Part 9.Sub-specification for flexible cables. The purpose is to establish the characteristics and general performance requirements, quality evaluation of flexible coaxial communication cables.
procedures, test and test methods, and recommended ratings.
--- Part 10.PTFE insulated semi-rigid cable sub-specification. The purpose is to establish the teflon insulated semi-rigid coaxial communication
Cable characteristics and general performance requirements, quality assessment procedures, test and test methods, and recommended ratings.
--- Part 11.Sub-specification for polyethylene insulated semi-rigid cables. The purpose is to establish the characteristics of polyethylene insulated semi-rigid coaxial communication cables
and general performance requirements, quality assessment procedures, test and test methods, and recommended ratings.
This document is the blank detail specification of GB/T 17737.8.GB/T 17737.8 specifies the teflon insulated semi-flexible cable
Usability requirements, excluding specific index requirements, are the basis for the preparation of blank detailed specifications for PTFE insulated semi-flexible cables. This document specifies
The format and requirements of the detailed specification for PTFE insulated semi-flexible cables need to be used together with GB/T 17737.8 and cannot be used alone.
Coaxial Communication Cables Part 8-1.Polytetrafluoroethylene
Blank detail specification for insulated semi-flexible cables
1 Scope
This document specifies the format and requirements for a detail specification for polytetrafluoroethylene (PTFE) insulated semi-flexible coaxial communication cables.
This document applies to microwave and wireless equipment and other communication equipment described in GB/T 17737.8 with polytetrafluoroethylene (PTFE) insulation
Semi-flexible coaxial communication cable.
This document and the detailed specifications developed in accordance with this document are used in conjunction with GB/T 17737.1-2013 and GB/T 17737.8-2022.
Manufacturers and users can develop detailed specifications based on this document.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations
documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to
this document.
GB/T 17737.1-2013 Coaxial Communication Cable Part 1.General Specifications General Principles, Definitions and Requirements (IEC 61196-1.2005,
IDT)
GB/T 17737.8-2022 Coaxial communication cables - Part 8.PTFE insulated semi-flexible cable sub-specification (IEC 61196-8.
2012, MOD)
100 (all parts)]
GB/T 17737.115-2018 Coaxial Communication Cable Part 1-105.Electrical Test Method Dielectric Withstand Voltage Test of Cable
(IEC 61196-1-105.2005, IDT)
200 (all parts)]
300 (all parts)]
GB/T 21021.1-2021 Intermodulation level measurement of passive radio frequency and microwave components - Part 1.General requirements and measurement methods
(IEC 62037-1.2012, IDT)
GB/T 21021.4-2021 Intermodulation level measurement of passive radio frequency and microwave components - Part 4.Passive intermodulation of coaxial cables
Measurement (IEC 62037-4.2012, IDT)
IEC 62230 Electric cable spark test method (Electriccables-Spark-testmethod)
|