HOME   Cart(12)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 17737.316-2018 English PDF

US$119.00 ยท In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 17737.316-2018: Coaxial communication cables -- Part 1-316: Mechanical test methods -- Test for maximum pulling force of cable
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 17737.316-2018English119 Add to Cart 2 days [Need to translate] Coaxial communication cables -- Part 1-316: Mechanical test methods -- Test for maximum pulling force of cable Valid GB/T 17737.316-2018

PDF similar to GB/T 17737.316-2018


Standard similar to GB/T 17737.316-2018

GB/T 17737.102   GB/T 17737.101   GB/T 17737.103   GB/T 17737.314   GB/T 17737.317   GB/T 17737.310   

Basic data

Standard ID GB/T 17737.316-2018 (GB/T17737.316-2018)
Description (Translated English) Coaxial communication cables -- Part 1-316: Mechanical test methods -- Test for maximum pulling force of cable
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard L26
Classification of International Standard 33.120.10
Word Count Estimation 6,632
Date of Issue 2018-03-15
Date of Implementation 2018-10-01
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GB/T 17737.316-2018: Coaxial communication cables -- Part 1-316: Mechanical test methods -- Test for maximum pulling force of cable


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Coaxial communication cables--Part 1-316. Mechanical test methods--Test for maximum pulling force of cable ICS 33.120.10 L26 National Standards of People's Republic of China Coaxial communication cable Section 1-316. Mechanical Test Methods Maximum tensile strength test of cable Part 1-316. Mechanical test methods- (IEC 61196-1-316.2005, IDT) Published by.2018-03-15 2018-10-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Administration released

Foreword

GB/T 17737 "Coaxial Communication Cable" has or plans to issue the following parts. --- Part 1. General rules General rules, definitions, and requirements --- Section 1-31 . Mechanical test methods ; Ellipticity test ; -- Part 1-302 . Mechanical test methods ; eccentricity test ; -- Part 1-304 . Mechanical test methods ; Impact test ; Part 1-108 . Mechanical test methods -- Tensile strength and elongation test of copper clad metal ; --- Part 1-310. Mechanical test methods Torsional characteristics of copper clad metal; --- Part 1-313. Mechanical test methods Adhesion of media and sheath; --- Part 1-314. Mechanical test methods Bending test of cables; --- Part 1-316. Mechanical test methods Maximum tensile strength test of cables; --- Part 1-317. Mechanical test methods Cable compression test; --- Sections 1-318. Mechanical test methods Thermal performance test; --- Part 1-324 . Mechanical test methods Cable abrasion resistance test ; --- Part 1-325 . Mechanical test methods Wind - induced vibration test ; This part is part 1-316 of GB/T 17737. This section was drafted in accordance with the rules given in GB/T 1.1-2009. This section uses the translation method equivalent to the use of IEC 61196-1-316.2005 "coaxial communication cable part 1-316. mechanical test side Maximum tensile strength test method." The Chinese documents that have a consistent correspondence with the normatively quoted international documents in this section are as follows. ---GB/T 17737.1-2013 Coaxial telecommunication cables Part 1. General specifications General, definitions and requirements (IEC 61196-1. 2005, IDT); ---GB/T 17737.115-2018 Coaxial communication cables Part 1-115. Electrical test methods Impedance uniformity (pulse/ Step function return loss test) (IEC 61196-1-115.2006, IDT). Please note that some of the contents of this document may involve patents. The issuing agency of this document does not assume responsibility for identifying these patents. This section was proposed by the Ministry of Industry and Information Technology of the People's Republic of China. This part is under the jurisdiction of the National Standardization Technical Committee for High Frequency Cables and Connectors for Electronic Equipment (SAC/TC190). This section was drafted. Jiaozuo Railway Cable Co., Ltd. The main drafters of this section. Wang Yongqing, Wang Shengjun, Shang Aimin, Wang Ruixi, Wu Zhengping, Tian Xin. Coaxial communication cable Section 1-316. Mechanical Test Methods Maximum tensile strength test of cable

1 Scope

This part of GB/T 17737 applies to coaxial communication cables. It specifies that the coaxial cable should withstand the maximum allowable load (longitudinal pull Extension) Test method for capacity.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. IEC 61196-1 Coaxial Communication Cables Part 1. Generic Specification General, Definitions and Requirements (Coaxialcommunicationca- bles-Part 1.Generic specification-General,definitionsandrequirements) IEC 61196-1-115 Coaxial communication cables Part 1-115. Electrical test methods Impedance uniformity (Pulse/step function back Wave Loss Test) [Coaxialcommunicationcables-Part 1-115. Electricaltestmethods-Testforregularity Ofimpedance(pulse/stepfunctionreturnloss)]

3 Terms and definitions

The terms and definitions defined by IEC 61196-1 apply to this document.

4 Maximum tensile test of cables

4.1 Principle This test determines the ability of the cable to withstand the maximum allowable load specified by the sub-specific specification or detailed specification. 4.2 Sample preparation Take a sample of a finished cable at least 6m long for testing. Prepare and equip adapters at both ends for test power The characteristic impedance of the cable sample. 4.3 Procedures Install the cable clamps as close to both ends of the cable as possible (not on the connector) and install it on the tensioning device on. One end is fixed and the other end is equipped with a tension gauge and ratchet traction device. Connect the sample to the impedance tester. Apply 10% of the maximum tensile force specified by the relevant cable specification between the cable gripping devices and do two on the cable Baseline markers, 1.5m apart. Note. Be careful not to damage the connection between the cable and the connector during the test. Test the characteristic impedance of the cable between the reference marks as specified in IEC 61196-1-115 (Procedure B); gradually increase the tension to the specified load

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 17737.316-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 17737.316-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 17737.316-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 17737.316-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.