HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 17737.313-2015 English PDF

US$114.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 17737.313-2015: Coaxial communication cables -- Part 1-313: Mechanical test methods -- Adhesion of dielectric and sheath
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 17737.313-2015English114 Add to Cart 3 days [Need to translate] Coaxial communication cables -- Part 1-313: Mechanical test methods -- Adhesion of dielectric and sheath Valid GB/T 17737.313-2015

PDF similar to GB/T 17737.313-2015


Standard similar to GB/T 17737.313-2015

GB/T 17737.102   GB/T 17737.101   GB/T 17737.103   GB/T 17737.314   GB/T 17737.316   GB/T 17737.310   

Basic data

Standard ID GB/T 17737.313-2015 (GB/T17737.313-2015)
Description (Translated English) Coaxial communication cables -- Part 1-313: Mechanical test methods -- Adhesion of dielectric and sheath
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard L26
Classification of International Standard 33.120.10
Word Count Estimation 6,665
Date of Issue 2015-06-02
Date of Implementation 2016-02-01
Quoted Standard GB/T 17737.1-2013
Adopted Standard IEC 61196-1-313-2009, IDT
Regulation (derived from) National Standard Announcement 2015 No.19
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This Standard applies to coaxial communication cables, coaxial cable medium test methods specified internal and outer conductor and jacket outer conductor adhesion.

GB/T 17737.313-2015: Coaxial communication cables -- Part 1-313: Mechanical test methods -- Adhesion of dielectric and sheath


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Coaxial communication cables Part 1-313. Mechanical test methods Adhesion of dielectric and sheath ICS 33.120.10 L26 National Standards of People's Republic of China Coaxial communication cables Part 1-313. Mechanical test methods Medium and sheath adhesion Part 1-313. Mechanicaltestmethods- (IEC 61196-1-313.2009, IDT) Issued on. 2015-06-02 2016-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 17737 "Coaxial communication cables" Mechanical Test Methods section or plan to release the following sections. --- The first part 1-301. Mechanical test methods ovality test; --- - Part 1-302. Mechanical test methods eccentricity test; --- Section 1-304. Mechanical test methods for impact test; --- Section 1-308. Mechanical test methods for copper clad metal of tensile strength and elongation test; --- - Part 1-310. Mechanical test methods copper clad metal distortion performance test; --- Section 1-313. Mechanical test methods for medium and sheath adhesion; --- Section 1-314. Mechanical test methods for cable bending test; --- Part 1-316. Mechanical test methods for cables maximum tensile test; --- The first part 1-317. Mechanical test methods for cables compression testing; --- The first part 1-318. Mechanical test methods for thermal performance test; --- Section 1-324. Mechanical test methods for cables abrasion test; --- The first part 1-325. Mechanical test methods - Aeolian vibration test. This section GB/T Part of 1-31317737. This standard was drafted in accordance with GB/T 1.1-2009 given rules. This section uses the translation method is equivalent to using IEC 61196-1-313.2009 "Coaxial communication cables - Part 1-313. Mechanical test methods Medium and sheath adhesion. " This part made the following editorial changes. --- Edit "internal conductor medium" to "medium internal and external conductor" (see Chapter 1); --- Edit "length" to "length (l)" (see Chapter 5, Chapter 6, Chapter 7); --- Modify the cable each test site and marked the wrong perspective (Figure 1, Figure 2). Please note that some content of this document may involve patents, the issuing authority of this document does not assume responsibility for the identification of these patents. This part is proposed by the Ministry of Industry and Information Technology of the People's Republic of China. This section is under the jurisdiction of the National electronic equipment with a high-frequency cables and connectors Standardization Technical Committee (SAC/TC190). This section drafted by. China Electronics Technology Group Corporation No. 23 Research Institute. The main drafters of this section. to wear unique, Fang Xu, Jianping. Coaxial communication cables Part 1-313. Mechanical test methods Medium and sheath adhesion

1 Scope

GB/T 17737 in this section applies to coaxial communications cables, coaxial cable media provides internal and outer conductor and outer conductor sheath Adhesion Test Method.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 17737.1-2013 Coaxial communication cables - Part 1. Generic specification - General, definitions and requirements (IEC 61196-1.2005, IDT)

3 Terms and Definitions

Definitions GB/T 17737.1-2013 given apply to this document. Test Method 4 4.1 Sample Preparation Unless otherwise specified in the relevant cable, should the finished cable respectively intercept at least two samples of not less than 300mm in length. each Figure 1 root samples should be prepared. Stripping head should be very careful so as not to affect the adhesion of the sample. Rally test should be applied to that part of the two parts of smaller diameter, the portion should be long enough can be tensile testing machine Collet clamping. 4.2 Program Specimens shall be as shown in Figure 2, into the tensile testing machine and test fixture. Diameter orifice plate test should be higher than the test sites in both diameter A small portion of a large 0.10mm ± 0.03mm. Tension should not exceed 100mm/min is applied to the speed and stability, according to the different parts of the test until the dielectric, the outer conductor or sheath Completely removed. Avoid sudden pull and yank. Physical treatment of the sample should be as little as possible, so as not to damage the sample. 4.3 The results are shown Defined as the maximum adhesion tension measured. Test report adhesion value should measurements median.

5 Requirements

Length (l) and adhesion values \u200b\u200bshould comply with the relevant cable specification. Conductor surface may leave a small presence of insulating material residue.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 17737.313-2015_English be delivered?

Answer: Upon your order, we will start to translate GB/T 17737.313-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 17737.313-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 17737.313-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.