|
US$294.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 17738.4-2013: Radio frequency and coaxial cable assemblies -- Part 4: Sectional specification for semi-rigid coaxial cable assemblies
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 17738.4-2013 | English | 294 |
Add to Cart
|
3 days [Need to translate]
|
Radio frequency and coaxial cable assemblies -- Part 4: Sectional specification for semi-rigid coaxial cable assemblies
| Valid |
GB/T 17738.4-2013
|
PDF similar to GB/T 17738.4-2013
Basic data | Standard ID | GB/T 17738.4-2013 (GB/T17738.4-2013) | | Description (Translated English) | Radio frequency and coaxial cable assemblies -- Part 4: Sectional specification for semi-rigid coaxial cable assemblies | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L26 | | Classification of International Standard | 33.120.10 | | Word Count Estimation | 15,120 | | Older Standard (superseded by this standard) | GB/T 15867-1995 | | Quoted Standard | GB/T 17738.1-2013; GB/T 19000-2008; IEC 60096-2-1988; IEC 60410-1973; IEC 61169-1; IEC 61169-1-1; IEC 61169-2; IEC 61169-4; IEC 61169 -8; IEC 61169-14; IEC 61169-16; IEC 61169-18; IEC 61169-19; IEC 61169-24; IEC 61169-26; IEC 61169-29; IEC 61169-31; IEC 6 | | Adopted Standard | IEC 60966-4-2003, IDT | | Regulation (derived from) | National Standards Bulletin No. 25 of 2013 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard provides a uniform requirements for electrical, mechanical and environmental performance test by the semi-rigid coaxial cable and coaxial connector cable assemblies composed. This standard applies to transfer transverse electromagnetic mode | GB/T 17738.4-2013: Radio frequency and coaxial cable assemblies -- Part 4: Sectional specification for semi-rigid coaxial cable assemblies
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Radio frequency and coaxial cable assemblies Part 4. Sectional specification for semi-rigid coaxial cable assemblies
ICS 33.120.10
L26
National Standards of People's Republic of China
Replacing GB/T 15867-1995
RF coaxial cable assemblies
Part 4. semi-rigid coaxial cable assemblies
Part 4. Sectionalspecificationforsemi-rigidcoaxialcableassemblies
(IEC 60966-4.2003, IDT)
Issued on. 2013-12-17
2014-06-15 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 1 Design and construction requirements
5 processing quality, marking and packaging 2
6 Quality Assessment 3
7 General Test Method 3
8 Electrical Test 3
9 Mechanical Strength Test 4
10 Environmental Test 4
Specific test methods 11 5
5 12 test schedule
References 11
Foreword
GB/T 17738 "RF coaxial cable assembly" is divided into the following sections.
--- Part 1. Generic specification and test methods - General requirements;
--- Part 2. Sectional specification for flexible coaxial cable assemblies;
--- Part 3. semi-flexible coaxial cable assemblies;
--- Part 4. semi-rigid coaxial cable assemblies.
This section GB/T Part of 417,738.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This section replaces the GB/T 15867-1995 "RF coaxial cable assemblies - Part 4. Semi-rigid coaxial cable assemblies."
This section compared with the GB/T 15867-1995, the main technical changes are as follows.
--- Delete a chapter division, the "Range 1" and "Objective 2" into the "Range 1" (see Chapter 1, GB/T 15867-1995 of the first
Chapter 21 and Chapter);
--- Remove the "definition" of the content, direct reference to GB/T 17738.1-2013 provisions (see Chapter 3,
Chapter GB/T 15867-1995 4th);
--- Increasing the length of the cable assembly and the definition of the legend (see 4.3);
--- Added "processing quality, marking and packaging" and "quality assessment" (see Chapters 5 and 6);
--- Remove the "phase change with temperature" (see GB/T 15867-1995 9.8);
--- Remove the pressure test on the test voltage specified preferred value (see GB/T 15867-1995 of 9.10.1);
--- Increased test methods "vibration, impact and shock" (see 10.2.1);
--- Delete "special test methods" in the content, direct reference to GB/T 17738.1-2013 provisions (see Chapter 11,
Chapter GB/T 15867-1995 No. 12);
--- The "bending fatigue" to "bend durability" (see 9.3, GB/T 15867-1995 10.3), "Torque" to "reverse" (see
Tables 1 and 2, GB/T 15867-1995 12.2, Tables 1 and 2);
--- Added "multiple bend" (see 9.6), "Resistance to solvents and contaminating fluids" (see Tables 1 and 2), "dust test" (see Table 1 and Table
2) and "Flammability (see Tables 1 and 2)";
--- Refine the capability approval procedure (see 12.3).
This section uses the translation method is equivalent to using IEC 60966-4.2003 "RF coaxial cable assemblies - Part 4. semi-rigid coaxial cable assemblies
Specification. "
This part made the following editorial changes.
--- Modified representation 4.3 cable assembly length;
--- Fixed Table 2 pilot projects in the sample.
Please note that some of the content of this standard may involve patents, the issuing authority of this standard does not assume the responsibility to identify these patents.
This part is proposed by the Ministry of Industry and Information Technology of the People's Republic of China.
This section is under the jurisdiction of the National electronic equipment with a high-frequency cables and connectors Standardization Technical Committee (SAC/TC190).
This section drafted by. China Electronics Technology Group Corporation No. 23 Research Institute.
The main drafters of this section. Wuxi Fei, Zhang Jianping, Wang Yi, Wu Zhengping.
This part of the standard replaces the previous editions are.
--- GB/T 15867-1995.
RF coaxial cable assemblies
Part 4. semi-rigid coaxial cable assemblies
1 Scope
This section provides a uniform electrical, mechanical and environmental performance test by the semi-rigid coaxial cable and coaxial connector cable assemblies consisting of
Claim.
This section semi-rigid coaxial cable assemblies (hereinafter referred to as cable assemblies) suitable for transmitting transverse electromagnetic mode (TEM) of.
Note 1. reg number consistent with the overall specification.
Note 2. For this part, cable assemblies always be seen as an integral unit. All the provisions applicable to the finished cable assemblies not suitable for the individual, not
Assembled parts.
Note 3. This section is supplemented by detailed specification, detail specification shall specify the additional details of the specific application needs, this application is not necessarily required for all tests.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 17738.1-2013 RF coaxial cable assemblies - Part 1. Generic specification - General requirements and test methods
(IEC 60966-1.1999, IDT)
GB/T 19000-2008 Quality Management System - Fundamentals and vocabulary (ISO 9000.2005, IDT)
IEC 60096-2. 1988 Radio-frequency cables - Part 2. relevant cable specifications (Radio-frequencycables-Part 2.
Relevantcablespecifications)
IEC 60410. 1973 count inspection sampling plans and procedures (Samplingplansandproceduresforinspectionbyat-
tributes)
IEC 61169 (alparts) RF connectors (Radio-frequencyconnectors)
IEC 61196 (alparts) RF cable (Radio-frequencycables)
3 Terms and Definitions
Terms and definitions GB/T 17738.1-2013 defined apply to this document.
4 Design and construction requirements
GB/T 17738.1-2013 in Chapter 4 is replaced by the following.
4.1 cable design and structure
Cable shall comply with IEC 60096-2 or IEC 61196 relevant portion. When these standards need to be different cable design, electrical
Cable should comply with detailed specifications.
If necessary, to meet the detailed specifications, the manufacturer may use additional protective pipes or cables different from IEC 61196, it
Compliance with detailed specifications.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 17738.4-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 17738.4-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 17738.4-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17738.4-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|