|
Std ID |
Description (Standard Title) |
|
GB/T 4779.1-1984
|
Phosphors for color picture tubes use--Phosphor Y22-G3
|
|
GB/T 4779.2-1984
|
Phosphors for color picture tubes use--Phosphor Y22-B2
|
|
GB/T 4779.3-1984
|
Phosphors for color picture tubes use--Phosphor Y22-R4
|
|
GB/T 41180-2021
|
General specification for the E-book reader
|
|
GB/T 14199-1993
|
General specification for pocket hearing aids
|
|
GB/T 11454-1989
|
Magnetic field strength in audio-frequency induction loops for hearing aid purposes
|
|
GB/T 11455-1989
|
Hearing aid equipment not entirely worn on the listener
|
|
GB/T 7614-1987
|
An artificial ear of wide band type for the calibration of earphones used in audiometry
|
|
GB/T 6832-1986
|
Methods of measurement on headphones
|
|
GB/T 19405.3-2025
|
Surface mounting technology - Part 3: Standard method for the specification of components for through hole reflow(THR) soldering
|
|
GB/T 45638-2025
|
Product package labels for electronic components using bar code and two-dimensional symbologies
|
|
GB/T 33772.2-2025
|
Quality assessment systems - Part 2: Selection and use of sampling plans for inspection of electronic components and packages
|
|
GB/T 45660-2025
|
Electronics assembly technology - Electronic modules
|
|
GB/T 45713.4-2025
|
Electronics assembly technology - Part 4: Endurance test methods for solder joint of area array type package surface mount devices
|
|
GB/T 45714.54-2025
|
Printed circuit board materials - Part 5-4: Sectional specification set for conductive foils and films with or without coatings - Conductive pastes
|
|
GB/T 45723-2025
|
Test method for printed board - Monitoring of single plated-through hole (PTH)resistance change during temperature cycling
|
|
GB/T 19247.6-2024
|
Printed board assemblies - Part 6: Evaluation criteria for voids in soldered joints of BGA and LGA and measurement method
|
|
GB/T 43799-2024
|
Sectional specification for high density interconnect printed boards
|
|
GB/T 43801-2024
|
Measurement of relative permittivity and loss tangent for copper clad laminate at microwave frequency - Split post dielectric resonator method
|
|
GB/T 43863-2024
|
Format for LSI - Package - Board interoperable design
|
|
GB/T 44295-2024
|
Epoxide woven E-glass prepreg for multilayer printed boards
|
|
GB/T 4725-2022
|
Epoxide woven glass fabric copper-clad laminated sheets for printed circuits
|
|
GB/T 4721-2021
|
General rules for rigid copper clad laminates for printed circuits
|
|
GB/T 9491-2021
|
Flux for tin soldering
|
|
GB/T 14515-2019
|
Sectional specification for single and double sided flexible printed board
|
|
GB/T 36476-2018
|
General specification for metal base copper-clad laminates for printed circuits
|
|
GB/T 5489-2018
|
Printed circuit board draw
|
|
GB/T 12631-2017
|
Test method for resistance of conductors of printed boards
|
|
GB/T 16261-2017
|
General specification for printed circuit boards
|
|
GB/T 33772.1-2017
|
Quality assessment systems -- Part 1: Registration and analysis of defects on printed board assemblies
|
|
GB/T 4722-2017
|
Test methods for rigid copper clad laminates for printed circuits board
|
|
GB/T 13557-2017
|
Test methods for copper-clad material for flexible printed circuits
|
|
GB/T 16315-2017
|
Polymide woven glass fabric copper clad laminated sheets for printed circuits
|
|
GB/T 4588.4-2017
|
Sectional specification for rigid multilayer printed boards
|
|
GB/T 4723-2017
|
Phenolic cellulose paper copper clad laminated sheets for printed circuit
|
|
GB/T 4724-2017
|
Composite base copper clad laminated sheets for printed circuits
|
|
GB/T 14708-2017
|
Adhesive coated polyester film for flexible printed circuits
|
|
GB/T 13555-2017
|
Copper-clad polyimide film laminates for flexible printed circuits
|
|
GB/T 13556-2017
|
Copper-clad polyester film laminates for flexible printed circuits
|
|
GB/T 14709-2017
|
Adhesive coated polyimide film for flexible printed circuits
|
|
GB/T 33015-2016
|
General rules for bonding sheet for multilayer printed boards
|
|
GB/T 33016-2016
|
Test methods for bonding sheet for multilayer printed boards
|
|
GB/T 31471-2015
|
General specification for metal foil for printed circuits
|
|
GB/T 31988-2015
|
Aluminium base copper clad laminate for printed circuits
|
|
GB/T 30091-2013
|
Specifications for membrane key board
|
|
GB/T 4588.3-2002
|
Design and use of printed boards
|
|
GB/T 4677-2002
|
Test methods of printed boards
|
|
GB/T 9491-2002
|
Liquid flux for soldering (Rosin base)
|
|
GB/T 18334-2001
|
Specification for flexible multilayer printed boards with through connections
|
|
GB/T 18335-2001
|
Specification for flex-rigid multilayer printed boards with through connections
|
|
GB/T 4588.12-2000
|
Specification for mass lamination panels (semi-manufactured multilayer printed boards)
|
|
GB/T 1360-1998
|
Grid systems for printed circuits
|
|
GB/T 16261-1996
|
Generic specification of printed boards
|
|
GB/T 4588.1-1996
|
Sectional specification: single and double sided printed boards with plain holes
|
|
GB/T 4588.2-1996
|
Sectional specification: single and double sided printed boards with plated-through holes
|
|
GB/T 4588.4-1996
|
Sectional specification. Multilayer printed boards
|
|
GB/T 4588.10-1995
|
Printed boards. Part 10: Specification for flex-rigid double-sided printed boards with through connections
|
|
GB/T 2036-1994
|
Terms for printed ciruits
|
|
GB/T 14708-1993
|
Adhesive coated polyester film for flexibleprinted circuits
|
|
GB/T 14709-1993
|
Adhesive coated polyimide film for flexible printed circuits
|
|
GB/T 13555-1992
|
Flexible copper clad material for printed circuits
|
|
GB/T 13556-1992
|
Flexible copper-clad polyester film for printed circuits
|
|
GB/T 13557-1992
|
Test methods for flexible copper-clad material for printed circuits
|
|
GB/T 4721-1992
|
General rules for copper-clad laminated sheets for printed circuits
|
|
GB/T 4722-1992
|
Test methods for copper-clad laminatedsheets for printed circuits
|
|
GB/T 4723-1992
|
Phenolic cellulose paper copper-clad laminated sheets for printed circuits
|
|
GB/T 4724-1992
|
Epoxide cellulose paper copper-clad laminated sheets for printed circuits
|
|
GB/T 4725-1992
|
Epoxide woven glass fabric copper-clad laminated sheets for printed circuits
|
|
GB/T 12629-1990
|
Thin epoxide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards
|
|
GB/T 12630-1990
|
Thin epoxide woven glass fabric copper-clad laminated sheet, general purpose grade, For use in the fabrication of multilayer printed boards
|
|
GB/T 12631-1990
|
Test method for resistance of conductor of printed boards
|
|
GB/T 4588.3-1988
|
Design and use of printed boards
|
|
GB/T 4677.12-1988
|
Test method of interconnection resistance for printed boards
|
|
GB/T 4677.13-1988
|
Test method of change in resistance of plated-through holes-thermal cycling for printed boards
|
|
GB/T 4677.14-1988
|
Test method of steam/oxygen accelerated ageing of printed boards
|
|
GB/T 4677.15-1988
|
Test method for solvent and flux resistance of insulating coating on printed boards
|
|
GB/T 4677.16-1988
|
General examination method for printed boards
|
|
GB/T 4677.17-1988
|
Test method for insulation resistance within inner layers of multilayer printed boards
|
|
GB/T 4677.18-1988
|
Test method for insulation resistance between layers of multilayer printed boards
|
|
GB/T 4677.19-1988
|
Test methods for electrical integrity of printed boards
|
|
GB/T 4677.20-1988
|
Test method for plating adhesion of printed boards--Burnishing
|
|
GB/T 4677.21-1988
|
Test method for plating porosity of printed boards--the gas exposure method
|
|
GB/T 4677.22-1988
|
Test methods for surface ionic contamination of printed boards
|
|
GB/T 4677.23-1988
|
Test method for flammability of printed boards
|
|
GB/T 9315-1988
|
Series for printed boards outside dimension
|
|
GB/T 7613.1-1987
|
Test method for current proof of conductors on printed board
|
|
GB/T 7613.2-1987
|
Test methods for voltage proof of surface layers on printed boards
|
|
GB/T 7613.3-1987
|
Test methods for current proof of plated-through holes on printed boards
|
|
GB/T 5489-1985
|
Printed board drawing
|
|
GB/T 4677.10-1984
|
Test method of solderability for printed boards
|
|
GB/T 4677.11-1984
|
Test methods of thermal shock for printed boards
|
|
GB/T 4677.1-1984
|
Test method of surface insulation resistance for printed boards
|
|
GB/T 4677.2-1984
|
Micro-resistance test method of plating thickness of plated through holes for printed boards
|
|
GB/T 4677.3-1984
|
Test methods of pull strength for printed boards
|
|
GB/T 4677.4-1984
|
Test methods of peel strength for printed boards
|
|
GB/T 4677.5-1984
|
Test methods of platness for printed boards
|
|
GB/T 4677.6-1984
|
Test methods for thickness of metal and oxide coating by microscopical examination of cross-section
|
|
GB/T 4677.7-1984
|
Test methods of plating adhesion by adhesive type for printed boards
|
|
GB/T 4677.8-1984
|
Test methods of plating and coating thickness by beta backscattering for printed boards
|
|
GB/T 4677.9-1984
|
The electrographic test method of plating porosity for printed boards
|