|
US$359.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5489-2018: Printed circuit board draw
Status: Valid GB/T 5489: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 5489-2018 | English | 359 |
Add to Cart
|
4 days [Need to translate]
|
Printed circuit board draw
| Valid |
GB/T 5489-2018
|
| GB/T 5489-1985 | English | 479 |
Add to Cart
|
3 days [Need to translate]
|
Printed board drawing
| Obsolete |
GB/T 5489-1985
|
PDF similar to GB/T 5489-2018
Standard similar to GB/T 5489-2018 GB/T 12631 GB/T 4725 GB/T 4721 Basic data | Standard ID | GB/T 5489-2018 (GB/T5489-2018) | | Description (Translated English) | Printed circuit board draw | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L30 | | Classification of International Standard | 31.180 | | Word Count Estimation | 18,147 | | Date of Issue | 2018-09-17 | | Date of Implementation | 2019-04-01 | | Older Standard (superseded by this standard) | GB/T 5489-1985 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 5489-2018: Printed circuit board draw---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Printed circuit board draw
ICS 31.180
L30
National Standards of People's Republic of China
Replace GB/T 5489-1985
Printed board drawing
Published on.2018-09-17
Implementation of.2019-04-01
State market supervision and administration
China National Standardization Administration issued
Content
Foreword I
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Requirements 1
4.1 Labeling method 1
4.1.1 General 1
4.1.2 Dimensional Line Method 1
4.1.3 Grid Method 1
4.1.4 Mixed method 4
4.2 Drawing 5
4.2.1 Drawing No. 5
4.2.2 Graphic layer selection 5
4.2.3 Origin 5
4.2.4 Conductive pattern 5
4.2.5 Solder Mask Figure 7
4.2.6 Hole Bit Pattern 8
4.2.7 Structural Elements Figure 10
4.2.8 Character Graphics 10
4.2.9 Printed Board Graphics 11
4.2.10 Printed board assembly assembly graphic 12
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 5489-1985 "Printed board drawing", compared with GB/T 5489-1985, the main technical changes are as follows.
--- Clearly the scope is only suitable for hand-drawing printed board drawings and printed board assembly assembly drawings, automatic CAD design can refer to this
Standard (see Chapter 1);
--- Added terms and definitions (see Chapter 3);
--- Increased the requirements for graphics drawing, such as the figure number, graphics layer and origin requirements (see 4.2);
--- Increased the color drawing method and diagram outside the two-line outline of the conductive pattern; increase the conductive pattern drawing to indicate the wire width, the most
Dimensional data requirements for small pitch, lands, ring width, margins, etc.; increase the need to consider large area conductive when drawing conductive patterns
Area, balanced wire, isolation area, and spacer disk size; added the contents of the inner isolation area and isolation disk for drawing multilayer printed boards
(see 4.2.4);
--- Added solder mask patterns such as resist pads, apertures and pad shapes (see 4.2.5);
--- Increased hole pattern, deleted the contents of holes and hole resistance (see 4.2.6);
--- Added structural element graphics (see 4.2.7);
--- Change the original standard marker symbol and marker symbol map to character graphics (see 4.2.8, 2.5 of the 1985 edition);
--- Added printed board graphics, including single-panel, double-panel, multi-layer board, imposition map, and surface mount component diagrams on printed boards
(see 4.2.9);
--- Added printed board assembly graphics, including printed board assembly drawings, component and structural drawing, conductive patterns and cross-overs, etc.
(see 4.2.10).
Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying these patents.
This standard is under the jurisdiction of the National Printed Circuit Standardization Technical Committee (SAC/TC47).
This standard was drafted. Ningbo Economic and Technological Development Zone East Asia Circuit Board Co., Ltd., China Electronics Technology Standardization Institute.
The main drafters of this standard. Zhu Min, Lou Fangshou, Cao Yi.
The previous versions of the standards replaced by this standard are.
---GB/T 5489-1985.
Printed board drawing
1 Scope
This standard specifies the drawing of printed board drawings and assembly drawings of printed board assemblies (hereinafter referred to as printed board assembly drawings).
This standard is applicable to the orthographic and symbolic drawings of printed board drawings and printed board assembly drawings marked by the dimension line method and the grid method.
Drawing.
When using the automatic CAD to draw the printed board diagram, you can refer to it.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 1360 printed circuit grid system
GB/T 2036 printed circuit terminology
GB/T 4458.4 mechanical drawing size note
GB/T 4728 (all parts) Graphical symbols for electrical diagrams
3 Terms and definitions
The following terms and definitions as defined in GB/T 2036 apply to this document.
3.1
Represents conductive patterns, solder mask patterns, character graphics, structural elements, technical requirements, and related specifications.
Note. Dimensions are usually used.
4 requirements
4.1 Labeling method
4.1.1 General
The position and size of the conductive patterns, lead holes, and other structural elements of the printed board are generally specified by the dimension line method, the grid method, and the hybrid method.
4.1.2 Dimension line method
Unless otherwise specified, the standard for the size line shall comply with the provisions of GB/T 4458.4.
4.1.3 Grid method
4.1.3.1 Classification
The classification and requirements of the grid method are as follows.
a) Coordinate grid method of Cartesian coordinate system (hereinafter referred to as Cartesian grid method). The spacing of the Cartesian grid is in accordance with GB/T 1360
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 5489-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 5489-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 5489-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5489-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 5489-2018?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5489-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|