|
Std ID |
Description (Standard Title) |
|
GB/T 26069-2010
|
Specification for silicon annealed wafers
|
|
GB/T 26070-2010
|
Characterization of subsurface damage in polished compound semiconductor wafers by reflectance difference spectroscopy method
|
|
GB/T 26071-2010
|
Mono-crystalline silicon as cut slices for photovoltaic solar cells
|
|
GB/T 26072-2010
|
Germanium single crystal for solar cell
|
|
GB/T 26073-2010
|
Safety guiding for the evaluation of toxic and flammable gas detection systems
|
|
GB/T 26074-2010
|
Germanium monocrystal -- Measurement of resistivity -- DC linear four-point probe
|
|
GB/T 26075-2010
|
Steel bars for sucker rods
|
|
GB/T 26076-2010
|
Metal sheets and strips -- Axial-force-controlled fatigue testing method
|
|
GB/T 26077-2010
|
Metallic materials -- Fatigue testing -- Axial-strain-controlled method
|
|
GB/T 26078-2010
|
Metallic materials -- Welding residual stresses -- Method with explosion treatment
|
|
GB/T 26079-2010
|
Beam-type lifting device
|
|
GB/T 26080-2010
|
Roll-forming rectangle steel tube for tower crane
|
|
GB/T 26081-2010
|
Ductile iron pipes, fittings and accessories for sewage applications
|
|
GB/T 2608-1987
|
Silica refractory bricks
|
|
GB/T 2608-2001
|
Silica refractory bricks
|
|
GB/T 2608-2012
|
Silica refractory bricks
|
|
GB/T 26084-2010
|
General specification for electric rubber products of ship
|
|
GB/T 26085-2010
|
Test method and determination of total tin in antifouling paints for ship
|
|
GB/T 26086-2010
|
Retro-reflective sheeting for use on life-saving appliances
|
|
GB/T 26087-2010
|
Small craft -- Anchoring, mooring and towing -- Strong points
|
|
GB/T 26088-2010
|
Shipbuilding -- Water-cooled four cycle diesel engines for propelling
|
|
GB/T 26089-2010
|
Guidelines for instruction of marine diesel engines
|
|
GB/T 26090-2010
|
Gear circular pitch measuring instrument
|
|
GB/T 26091-2010
|
Gear single-flank meshing integrated error measuring instrument
|
|
GB/T 2609-1996
|
Microscope--Objectives
|
|
GB/T 2609-2006
|
Microscopes -- Objectives
|
|
GB/T 2609-2015
|
Microscopes -- Objectives
|
|
GB/T 26092-2010
|
Gear helix measuring instrument
|
|
GB/T 26093-2010
|
Gear dual-flank meshing measuring instrument
|
|
GB/T 26094-2010
|
Inductive length measuring instrument
|
|
GB/T 26095-2010
|
Electronic column micrometer
|
|
GB/T 26096-2010
|
Peak inductance micrometer
|
|
GB/T 26097-2010
|
Inductive length measuring instrument with digital display
|
|
GB/T 26098-2010
|
Roundness measuring instrument
|
|
GB/T 26099.1-2010
|
General principles of three-dimensional modeling for mechanical products -- Part 1: General requirements
|
|
GB/T 26099.2-2010
|
General principles of three-dimensional modeling for mechanical products -- Part 2: Part modeling
|
|
GB/T 26099.3-2010
|
General principles of three-dimensional modeling for mechanical products -- Part 3: Assembly modeling
|
|
GB/T 26099.4-2010
|
General principles of three-dimensional modeling for mechanical products -- Part 4: Model projection drawings
|
|
GB/T 26100-2010
|
General principles of digital mock-up for mechanical products
|
|
GB/T 26101-2010
|
General technology requirements of virtual assembly for mechanical products
|
|
GB/T 26102-2010
|
Guideline for computer aided process planning
|
|
GB/T 26103.1-2010
|
Curved tooth coupling GⅡCL
|
|
GB/T 26103.1-2011
|
GIICL drum shape gear coupling
|
|
GB/T 26103.3-2010
|
Curved tooth coupling GCLD
|
|
GB/T 26103.4-2010
|
NGCL curved tooth coupling with brake wheel
|
|
GB/T 26103.5-2010
|
NGCLZ curved tooth coupling with brake wheel
|
|
GB/T 26104-2010
|
WGJ Crowned teeth couplings with interconnecting shaft
|
|
GB/T 26105-2010
|
Test of rust preventive oil for rust preventing ability -- Electrochemical measurement with wire beam electrode
|
|
GB/T 26106-2010
|
Mechanically deposited coatings of zinc -- Specification and test methods
|
|
GB/T 26107-2010
|
Metallic and other inorganic coatings -- Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods -- Inclined wedge method
|
|
GB/T 26108-2010
|
Trivalent chromium electroplating specification
|
|
GB/T 26109-2010
|
Test of aqueous protective fluids for rust preventing ability -- Electrochemical measurement with wire beam electrode
|
|
GB/T 26110-2010
|
Specification of zinc-aluminium flake coatings
|
|
GB/T 26111-2010
|
Micro-electromechanical system technology -- Terms
|
|
GB/T 2611-1992
|
General requirements for testing machines
|
|
GB/T 2611-2007
|
General requirements for testing machines
|
|
GB/T 26112-2010
|
Micro-electromechanical system technology -- General rules for the assessment of micro-mechanical parameters
|
|
GB/T 26113-2010
|
Micro-electromechanical system technology -- General rules for the assessment of micro-geometrical parameters
|
|
GB/T 26114-2010
|
Filter for liquid filtration -- General technical specification
|
|
GB/T 26115-2010
|
Centrifugal pulp pump
|
|
GB/T 26116-2010
|
Internal combustion engine coaxial pump test method
|
|
GB/T 26117-2010
|
Testing method of micro electric pump
|
|
GB/T 26118.1-2010
|
Safety of machinery -- Assessment and reduction of risks arising from radiation emitted by machinery -- Part 1: General principles
|
|
GB/T 26118.2-2010
|
Safety of machinery -- Assessment and reduction of risks arising from radiation emitted by machinery -- Part 2: Radiation emission measurement procedure
|
|
GB/T 26118.3-2010
|
Safety of machinery -- Assessment and reduction of risks arising from radiation emitted by machinery -- Part 3: Reduction of radiation by attenuation or screening
|
|
GB/T 26119-2010
|
Green manufacturing -- Life cycle assessment for mechanical products -- General
|
|
GB/T 261-1983
|
Petroleum products--Determination of flash point--Closed cup method
|
|
GB/T 261-2008
|
Determination of flash point -- Pensky-Martens closed cup method [including MODIFICATION 1]
|
|
GB/T 26120-2010
|
Pipework -- Stainless steel threaded fittings
|
|
GB/T 26121-2010
|
Flexible rubber joint
|
|
GB/T 2612-1989
|
DDZ-2 Series process electronic control system--Operating signal
|
|
GB/T 26124-2011
|
In Vitro Diagnostic Reagent (kit) for Clinical Chemistry
|
|
GB/T 10397-2003
|
Small and medium power engines -- Evaluation of vibration
|
|
GB/T 26126-2010
|
Specifications of pulverized coal for small and medium-sized industrial boilers
|
|
GB/T 26127-2010
|
Compressed coalbed methane as vehicle fuel
|
|
GB/T 26128-2010
|
Classification and utilization of scarce and special coal resources
|
|
GB/T 26129-2010
|
Contact-type transmitter-receiver headset for fireman
|
|
GB/T 2613-1989
|
DDZ-IIISeries process electronic control system--Operating signal
|
|
GB/T 2613-2008
|
Electronic instrument general technical specification for industrial-process measurement and control system
|
|
GB/T 26135-2010
|
High Pressure cleaning unit
|
|
GB/T 26136-2010
|
Ultra-high pressure waterjet cutting machine
|
|
GB/T 26137-2010
|
Thermodynamic performance testing for blast furnace gas energy recovery turbo-expander
|
|
GB/T 26140-2010
|
Non-destructive testing -- Standards test method for determining residual stresses by neutron diffraction
|
|
GB/T 26141.1-2010
|
Non-destructive testing -- Qualification of radiographic film digitization systems -- Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
|
|
GB/T 26141.2-2010
|
Non-destructive testing -- Qualification of radiographic film digitization systems -- Part 2: Minimum requirements
|
|
GB/T 2614-1985
|
Nickel-chromium/Nickel-silicon thermocouple wires and reference table
|
|
GB/T 2614-1998
|
Nickel-Chromium/Nickel-Silicon thermocouple wires
|
|
GB/T 26142.1-2010
|
Pneumatic fluid power -- Five-port directional control valves, sizes 18mm and 26mm -- Part 1: Mounting interface surfaces without electrical connector
|
|
GB/T 26142.2-2010
|
Pneumatic fluid power -- Five-port directional control valves, size 18 mm and 26 mm -- Part 2: Mounting interface surfaces with optional electrical connector
|
|
GB/T 2614-2010
|
Nickel-Chromium/Nickel-Silicon thermocouple wires
|
|
GB/T 26143-2010
|
Connectors for hydraulic fluid power -- Test methods
|
|
GB/T 26144-2010
|
Liner fluoroplastics for flanged and wafer steel butterfly valve
|
|
GB/T 26145-2010
|
Drain valve
|
|
GB/T 26146-2010
|
Eccentric semi-ball value
|
|
GB/T 26147-2010
|
Specification for ball of ball valve
|
|
GB/T 26149-2010
|
TPM Sensor Module based tire pressure monitoring systems for motor vehicles
|
|
GB/T 26150-2010
|
Exempts washes Chinese jujube
|
|
GB/T 26151-2010
|
E-business invoice message based on XML
|
|
GB/T 26152-2010
|
E-business order message based on XML
|
|
GB/T 26153.1-2010
|
Flexible manufacturing system of off-line programming robots -- Part 1: General requirements
|