GB/T 26101-2010 English PDF

US$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26101-2010: General technology requirements of virtual assembly for mechanical products
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 26101-2010	169	Add to Cart	3 days	General technology requirements of virtual assembly for mechanical products	Valid

Similar standards

GB/T 26641   GB/T 23901.5   GB/T 23906   GB/T 26099.2   GB/T 26099.3   GB/T 26099.1   

Basic data

Standard ID: GB/T 26101-2010 (GB/T26101-2010)
Description (Translated English): General technology requirements of virtual assembly for mechanical products
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J04
Classification of International Standard: 01.100.01
Word Count Estimation: 7,794
Date of Issue: 1/10/2011
Date of Implementation: 10/1/2011
Quoted Standard: GB/T 24734.1; GB/T 26099.1; GB/T 26099.3
Regulation (derived from): Announcement of Newly Approved National Standards 2011 No. (No. 166 overall) 1
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Standard specifies the general requirements of mechanical products virtual assembly model, the general requirements of virtual assembly, the assembly process and requirements for planning and evaluation of the results of the virtual assembly. This Standard is applicable to assemble three-dimensional model of mechanical product assembly modeling design formation.

GB/T 26101-2010: General technology requirements of virtual assembly for mechanical products

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General technology requirements of virtual assembly for mechanical products ICS 01.100.01 J04 National Standards of People's Republic of China Mechanical Product Virtual Assembly General technical requirements Issued on. 2011-01-10 2011-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard by the National Technical product documentation Standardization Technical Committee (SAC/TC146) and focal points. This standard is mainly drafted by. Mechanical Science Research Institute, China Electronics Technology Group Corporation 28th Research Institute, Beijing Digital generous Science and Technology Co., Ltd., machine Productivity Promotion Center, Shanghai Jiaotong University, Xi'an University of Electronic Science and Technology, Guangxi Yuchai Machinery Co., SAIC-GM-Wuling Automobile Co., Ltd., Guangxi Liugong Machinery Co., Ltd. The main drafters. Zhang Hongqi, single Zhongde, Chen Weidong, Xiao Chengxiang, Wang Lu, Chendi Jiang, Yan Guangrong, seized Liu Hua, He Qichang, Liang Wu Temple, Shao Xiaodong, Li Nailiang, Yong Jun sea, Wenqiu Sheng, Zhang Yan, Han Linlin, Lidai Song, Liu Jing. Mechanical Product Virtual Assembly General technical requirements

1 Scope

This standard specifies the general requirements for mechanical product virtual assembly model, the general requirements of virtual assembly, virtual assembly process planning and assembly Evaluation of results and requirements. This standard applies to assemble three-dimensional model of mechanical product assembly modeling design formation.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 24734.1 Technical product documentation - Digital product definition data practices - Part 1. Terms and definitions (GB/T 24734.1- 2009, ISO 16792.2006, NEQ) GB/T 26099.1 General rules for three-dimensional modeling of mechanical products - Part 1. General requirements Part 3 GB/T 26099.3 three-dimensional modeling of mechanical products general rules. Assembly Modeling

3 Terms and Definitions

GB/T 26099.1, GB/T 26099.3 and GB/T 24734.1 and established the following terms and definitions apply to this standard. 3.1 Virtual Assembly virtualassembly The assembly model assembly modeling of formation of a process assembly analysis and simulation. The process consists of one or more of the assembly sequence regulation Planning, assembly path planning and assembly simulation can be used for assembly interference checking and assembly process optimization purposes. 3.2 The virtual assembly model virtualassemblymodel Three-dimensional digital model of the desired product virtual assembly activities, which includes assembly model, model assembly environment, the virtual operator model. 3.3 Assembly Environment Model assemblyenvironmentmodel It refers to the related environmental model virtual assembly required, usually including assembly tool model, assembly space model and assembly flow information. 3.4 Assembly flow information assemblyflowinformation Event information for each assembly link assembly involved the entire assembly process is described, for example, the assembly of upstream and downstream information to each link assembly Demand and so on. 3.5 Assembly tool model assemblytoolmodel It refers to virtual assembly environment modeling tools used in the assembly process, tooling and related equipment information expression. 3.6 Assembly space model assemblyspacemodel That describes assembly tools, virtual operators and virtual assembly model during assembly activities in the form of an envelope space model. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 26101-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 26101-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 26101-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 26101-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.