GB/T 26119-2010 English PDF

US$459.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26119-2010: Green manufacturing -- Life cycle assessment for mechanical products -- General
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 26119-2010	459	Add to Cart	4 days	Green manufacturing -- Life cycle assessment for mechanical products -- General	Valid

Similar standards

GB/T 26641   GB/T 23901.5   GB/T 23906   GB/T 30565   GB/T 33523.600   GB/T 19799.3   

Basic data

Standard ID: GB/T 26119-2010 (GB/T26119-2010)
Description (Translated English): Green manufacturing -- Life cycle assessment for mechanical products -- General
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J04
Classification of International Standard: 25.010
Word Count Estimation: 20,287
Date of Issue: 1/10/2011
Date of Implementation: 10/1/2011
Quoted Standard: GB/T 24040-2008; GB/T 24044-2008
Regulation (derived from): Announcement of Newly Approved National Standards 2011 No. (No. 166 overall) 1
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Standard specifies the mechanical product life cycle assessment of the basic principles and frameworks, evaluation methods and general reporting requirements. This Standard is applicable to mechanical products and application life cycle assessment study for the evaluation of mechanical product lifecycle stage or specify potential environmental impacts.

GB/T 26119-2010: Green manufacturing -- Life cycle assessment for mechanical products -- General

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Green manufacturing. Life cycle assessment for mechanical products. General ICS 25.010 J04 National Standards of People's Republic of China Green manufacturing machinery General Life Cycle Assessment Issued on. 2011-01-10 2011-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ Introduction Ⅱ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Principles and Framework 4 5 Evaluation Method 7 6 Report 12 Appendix A (informative) machinery inventory analysis Example 13 Annex B (informative) Example of calculation results of 14 types of parameters References 15

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard by the National Green Manufacturing Technology Standardization Technical Committee (SAC/TC337) and focal points. This standard was drafted. the machine Productivity Promotion Center, Shandong University, Tsinghua University and the Guangdong Provincial Institute of Standardization. The main drafters of this standard. Ding Hongyu, Xidao Yun, Lifang Yi, Wang Xiaowei, Liu Hongqi, Xiaocheng Xiang, Guo Yingling, east, Liu Hua.

Introduction

Mechanical products through life cycle assessment to identify and evaluate mechanical product life cycle stages or designated potential environmental impacts of the entire life, mechanical Green product manufacturing decisions provide a scientific basis. Mechanical life cycle assessment based on full life-cycle concept, by mechanical products obtained from raw materials, production, storage, transportation, Use the treatment, recycling and final disposal of the end of life, including the entire life cycle of energy, material consumption and waste discharge data Collection and analysis, quantification and evaluation of mechanical systems potential environmental impacts of products, improve the mechanical product design, process and methods, Achieve green manufacturing machinery products. Mechanical life cycle assessment comprises the following four stages. 1) to determine the purpose and scope; 2) inventory analysis; 3) impact assessment; 4) interpretation. This standard is not given in the data collection, detailed impact assessment requirements. Green manufacturing machinery General Life Cycle Assessment

1 Scope

This standard specifies the general requirements for mechanical life cycle assessment framework and basic principles, methods and evaluation reports. This standard is applicable to mechanical products research and application of life cycle assessment for the evaluation of mechanical product lifecycle stage potential or designated Environmental impact.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 24040-2008 Environmental management - Life cycle assessment - Principles and framework GB/T 24044-2008 Environmental management - Life cycle assessment - Requirements and guidelines

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 Lifecycle lifecycle Mechanical products obtained from raw materials to product design, production, packaging, transportation, use, recycling and eventual disposal of the whole process. 3.2 Life Cycle Assessment lifecycleassessment (LCA) Product lifecycle mechanical system input, output and the compilation and evaluation of potential environmental impacts. 3.3 Life cycle inventory analysis lifecycleinventoryanalysis (LCI) Life Cycle Assessment of mechanical products throughout the life cycle of the input and output stages of compilation and quantification. 3.4 Life cycle inventory analysis lifecycleinventoryanalysisresult (LCIresult) Life cycle inventory results accordingly through the system boundary flow of energy and material flow are classified as affecting life cycle The starting point for evaluation. [GB/T 24040-2008, the definition 3.24] 3.5 Life Cycle Impact Assessment lifecycleimpactassessment (LCIA) LCA understand and evaluate the potential environmental production system in the entire product life cycle affect the size and importance stage. [GB/T 24040-2008, the definition 3.4] 3.6 Life cycle interpretation lifecycleinterpretation Life cycle assessment in accordance with the provisions of the inventory analysis of the purpose and scope of the requirements and (or) the results of the evaluation to assess the impact to form ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 26119-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 26119-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 26119-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 26119-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.