GB/T 26104-2010 English PDF

US$419.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26104-2010: WGJ Crowned teeth couplings with interconnecting shaft
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 26104-2010	419	Add to Cart	3 days	WGJ Crowned teeth couplings with interconnecting shaft	Valid

Similar standards

GB/T 5015   GB/T 5014   GB/T 30819   GB/T 26103.1   GB/T 26103.3   GB/T 26103.1   

Basic data

Standard ID: GB/T 26104-2010 (GB/T26104-2010)
Description (Translated English): WGJ Crowned teeth couplings with interconnecting shaft
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J19
Classification of International Standard: 21.120.20
Word Count Estimation: 18,126
Date of Issue: 1/10/2011
Date of Implementation: 10/1/2011
Quoted Standard: GB/T 191; GB/T 1184; GB/T 3098.1; GB/T 3141; GB/T 3852; GB/T 4879; GB/T 6388; GB/T 6403.4; GB/T 7324; GB/T 10095.2; GB/T 13384; JB/T 5000.15; JB/T 6396; GB/T 10095.1
Regulation (derived from): Announcement of Newly Approved National Standards 2011 No. (No. 166 overall) 1
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Standard specifies WGJ intermediate shaft connection type drum gear coupling (hereinafter referred to as the coupling) of the type, the basic parameters, the main dimensions and technical requirements. Angular displacement of the ������ �� When This Standard is applicable to the coupling of two different axes drive pumping system, rotary coupling diameter ��130 mm-��1000mm, transfer nominal torque is 6. 3kN �� m-3150kN �� m, there are workloads 1. 5 ��, when no workload angular displacement of the ������ �� 2 �� of the intermediate shaft connection WGJ type drum gear coupling.

GB/T 26104-2010: WGJ Crowned teeth couplings with interconnecting shaft

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
WGJ Crowned teeth couplings with interconnecting shaft ICS 21.120.20 J19 National Standards of People's Republic of China WGJ intermediate shaft connection type drum gear coupling Issued on. 2011-01-10 2011-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard by the National Standardization Technical Committee of the machine shaft and accessories (SAC/TC109) and focal points. This standard was drafted. China's second heavy machinery company, the machine Productivity Promotion Center, the coupling plant Jizhou. The main drafters of this standard. Guang hair, bright green new, Liu Jingsheng, Deng Takami. WGJ intermediate shaft connection type drum gear coupling

1 Scope

This standard specifies the WGJ type joint intermediate shaft drum gear coupling (hereinafter referred to as the coupling) the type, basic parameters and the main dimensions Technical requirements. This standard applies to join two different axes of drive shafts, couplings turning diameter of φ130mm ~ φ1000mm, transfer nominal revolution Moment of 6.3kN · m ~ 3150kN · m, when the workload angular displacement of Δα≤ ± 1.5 °, the angular displacement of the load when there is no work Δα≤ ± 2 ° of the intermediate shaft connection WGJ type drum gear coupling.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 191 Packaging - Pictorial signs (GB/T 191-2008, ISO 780.1997, MOD) GB/T 1184 shape and position tolerances without individual tolerance value (GB/T 1184-1996, eqv ISO 2768-2. 1989) GB/T 3098.1 Mechanical properties of fasteners Bolts, screws and studs (GB/T 3098.1-2010, ISO 898-1.2009, MOD) GB/T 3141 Industrial liquid lubricants - ISO viscosity classification (GB/T 3141-1994, eqv ISO 3448.1992) GB/T 3852 and the coupling shaft hole coupling type and size GB/T 4879 rust-proof packaging GB/T 6388 transport package shipping mark GB/T 6403.4 parts rounding chamfer GB/T 7324 General Lithium Grease GB/T 10095.1 cylindrical gear accuracy system - Part 1. Definitions tooth surface deviation and ipsilateral tooth allowable value (GB/T 10095.1-2008, ISO 1328-1.1995, IDT) GB/T 10095.2 cylindrical gear accuracy system - Part 2. radial composite deviations and runout Definitions and allowable values (GB/T 10095.2-2008, ISO 1328-2.1997, IDT) GB/T 13384 mechanical and electrical products packaging General technical conditions Part 15 JB/T 5000.15 Heavy mechanical general techniques. non-destructive testing of steel forgings JB/T 6396 Large alloy steel forgings 3 Types, basic parameters and the main dimensions Type 3.1 A basic type ---, see Figure 1. Type B --- axial buffered, shown in Figure 2. --- C-ring gear combination for WGJ7 ~ WGJ23, shown in Figure 3. 3.2 Model WGJ WGJ intermediate shaft connection type drum gear coupling Specifications sequence number Type code A, B, C (A type may mark) ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 26104-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 26104-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 26104-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 26104-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.