GB/T 26099.3-2010 English PDF

US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26099.3-2010: General principles of three-dimensional modeling for mechanical products -- Part 3: Assembly modeling
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 26099.3-2010	229	Add to Cart	3 days	General principles of three-dimensional modeling for mechanical products -- Part 3: Assembly modeling	Valid

Similar standards

GB/T 26641   GB/T 23901.5   GB/T 23906   GB/T 26099.4   GB/T 26100   GB/T 26099.2   

Basic data

Standard ID: GB/T 26099.3-2010 (GB/T26099.3-2010)
Description (Translated English): General principles of three-dimensional modeling for mechanical products -- Part 3: Assembly modeling
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J04
Classification of International Standard: 01.100.01
Word Count Estimation: 10,146
Date of Issue: 1/10/2011
Date of Implementation: 10/1/2011
Quoted Standard: GB/T 24734.1; GB/T 26099.1; GB/T 26101
Regulation (derived from): Announcement of Newly Approved National Standards 2011 No. (No. 166 overall) 1
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Standard specifies the mechanical product assembly modeling of general principles, general requirements, detailed requirements definition assembly hierarchy principle, the general requirements of assembly constraints, regulatory requirements tree assembly, assembly modeling, and model package. This Standard is applicable to construct mechanical product assembly modeling process assembly model, application and management.

GB/T 26099.3-2010: General principles of three-dimensional modeling for mechanical products -- Part 3: Assembly modeling

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General principles of three-dimensional modeling for mechanical products Part 3. Assembly modeling ICS 01.100.01 J04 National Standards of People's Republic of China General rules for three-dimensional modeling of mechanical products Part 3. Assembly Modeling Part 3. Assemblymodeling Issued on. 2011-01-10 2011-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 26099-2010 "General rules for three-dimensional modeling of mechanical products" is divided into four parts. --- Part 1. General requirements; --- Part 2. part modeling; --- Part 3. assembly modeling; --- Part 4. The model projection drawing. This section GB/T 26099-2010 Part 3 "three-dimensional modeling of mechanical products general rule," the. Appendix A of this section and Appendix B is an informative annex. This part of the National Technical product documentation Standardization Technical Committee (SAC/TC146) and focal points. This part mainly drafted by. The machine Productivity Promotion Center, Beijing Extech Information Co., Ltd., China Electronics Technology Group Corporation Thirty-eighth Institute, Guangxi Yuchai Machinery Co., Ltd., SAIC-GM-Wuling Automobile Co., LiuGong has Limited. The main drafters of this section. Zhang Hongqi, Wenqiu Sheng, Xiao Chengxiang, Wang Lu, Chen Weidong, Liu seized Hua Yan Guangrong, Yong Jun sea, He Dandan, Zhang Yan, Hanlin Lin, Chendi Jiang Peng fifty-four. General rules for three-dimensional modeling of mechanical products Part 3. Assembly Modeling

1 Scope

This section GB/T 26099 specifies the general principles of mechanical product assembly modeling, general requirements, the definition of the principle of the assembly hierarchy, The general requirements of assembly constraints, the detailed requirements of the assembly tree management requirements, assembly modeling and modeling of the package. This section is applicable to mechanical product assembly modeling process to build, use and manage assembly model.

2 Normative references

The following documents contain provisions which, through reference GB/T 26099 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 24734.1 Technical product documentation - Digital product definition data practices - Part 1. Terms and definitions (GB/T 24734.1-2009, ISO 16792.2006, NEQ) GB/T 26099.1 General rules for three-dimensional modeling of mechanical products - Part 1. General requirements GB/T 26101 Mechanical Product Virtual Assembly General technical requirements

3 Terms and Definitions

GB/T 24734.1, GB/T 26099.1 and GB/T 26101 and established the following terms and definitions apply GB/T 26099 Of this section. 3.1 Assembly modeling assemblymodeling Three-dimensional CAD software for mechanical parts and components for assembly design, and assembly process of the formation of the model. 3.2 Assembly constraints assemblyconstraint Relationship between the two assembly units established, it can reflect the static positioning and dynamic motion pair relationship between the assembly unit. 3.3 Assembly unit assemblyunit Assembly model parts or components involved in assembly operations. 3.4 Layout Model layoutmodel Also known as the skeleton model or control model for controlling the assembly model attitude, overall layout and key interfaces and assembly geometry letter Interest rates, mainly composed of planes, axes, points, coordinate, control curves, and surfaces, in top-down design parameters often designed as an assembly unit According to the benchmark.

4 General Principles

In the assembly modeling design should follow the following general principles. a) All the assembly unit should have a unique and stability, does not allow the existence of redundant elements; ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 26099.3-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 26099.3-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 26099.3-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 26099.3-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.