GB/T 26141.1-2010 English PDF

US$274.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26141.1-2010: Non-destructive testing -- Qualification of radiographic film digitization systems -- Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 26141.1-2010	274	Add to Cart	3 days	Non-destructive testing -- Qualification of radiographic film digitization systems -- Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control	Valid

Similar standards

GB/T 26641   GB/T 23901.5   GB/T 23906   GB/T 19799.3   GB/T 30565   GB/T 26140   

Basic data

Standard ID: GB/T 26141.1-2010 (GB/T26141.1-2010)
Description (Translated English): Non-destructive testing -- Qualification of radiographic film digitization systems -- Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J04
Classification of International Standard: 19.100; 37.040.25
Word Count Estimation: 14,123
Date of Issue: 2011-01-14
Date of Implementation: 2011-10-01
Quoted Standard: GB/T 19348.1; GB/T 26141.2
Adopted Standard: ISO 14096-1-2005, IDT
Regulation (derived from): National Standard Approval Announcement 2011 No.2
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the digitized radiographs basic performance parameters evaluation procedures, such as: spatial shoot, spatial linearity, density range, density contrast sensitivity and the characteristics of the transfer curve. They can be used with standard reference film (see Chapter 5) are integrated together into a software system, the digitization process quality control. Providing the reference to the backsheet side of the performance evaluation of a series of test target. Side of the test objectives applicable to evaluate the spatial resolution down to 25 ��m, density contrast sensitivity down to 0. 02 optical density, density in the range of 0. 5-4. 5, film size (350 X 430) m m digital system. This does not deal with the digital data signal processing and display.

GB/T 26141.1-2010: Non-destructive testing -- Qualification of radiographic film digitization systems -- Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Non-destructive testing Qualification of radiographic film digitisation systems Part 1. Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control ICS 19.100; 37.040.25 J04 National Standards of People's Republic of China NDT radiographic film digitization systems Qualification - Part 1. Definitions, image quality parameters Quantitative measurements, standard reference film and qualitative control Part 1. Definitions, quantitativemeasurementsofimagequalityparameters, (ISO 14096-1.2005, IDT) Issued on. 2011-01-14 2011-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 26141 "NDT Qualification of radiographic film digitization systems" is divided into two parts. --- Part 1. Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control; --- Part 2. Minimum requirements. This section GB/T 26141 Part 1. This part identical with ISO 14096-1.2005 qualification "NDT radiographic film digitization systems - Part 1. Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control "(in English). This section is equivalent translation ISO 14096-1.2005. For ease of use, this section made the following editorial changes. --- "This International Standard" be replaced by "this section"; "." --- With a decimal point instead of a comma as the decimal point, ""; --- Remove the foreword and introduction of international standards; --- With GB/T 1.1-2000 predetermined key words instead of the international standard introductory phrase. This part of the National NDT Standardization Committee (SAC/TC56) and focal points. This section is drafted. Jinan tome Inspection Technologies Co., Ltd. Shanghai IAC detected, Shanghai Research Institute of Materials, Shanghai Yasushi Detection Technology Co., Ltd., Shanghai - Friends Industrial Co., Ltd., Shanghai Wei Cheng Banda Detection Technology Co., Ltd., Shanghai Automation bamboo sun set Preparation Ltd., Shuo Germany (Beijing) Technology Co., Ltd., GE Inspection Technologies Limited. The main drafters of this section. Rae, Fan Qin, Jin Yufei Zhang YIMING, Zhao, Ding Minghua, Zhang Ying, Hong Yong, Sunbao Jiang.

Introduction

Radiographic film systems for industrial X-ray and gamma radiographic testing. In order to take advantage of computer data analysis, storage and transmission Advanced storage areas, the information should be stored within the radiographs are converted into digital data (digital). GB/T 26141 of the present Part of the minimum requirements to ensure that the film digitization process, effectively save the information for the assessment of the digitized data. NDT radiographic film digitization systems Qualification - Part 1. Definitions, image quality parameters Quantitative measurements, standard reference film and qualitative control

1 Scope

This section GB/T 26141 specifies the radiographs digitized basic performance parameters of the evaluation procedures, such as. spatial resolution Force, spatial linearity, density range, density contrast sensitivity and characteristic transfer curve. They can be a standard reference film (see Chapter 5) together It is integrated into the software system, the digitization process quality control. Reference film provides a series of performance evaluation tests aims. Test objectives apply to evaluate the spatial resolution as small as 25μm, density contrast sensitivity down to 0.02 optical density, density range 0.5 to 4.5, the film size (350 × 430) mm2 digital systems. This section does not involve digital signal processing and display of data.

2 Normative references

The following documents contain provisions which, through reference GB/T 26141 in this section constitute provisions of this section. For dated references, All subsequent amendments (excluding corrections) or revisions do not apply to this section, however, encourage an agreement under this section Parties to study the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 19348.1 destructive testing - Industrial radiographic film - Part 1. Classification of film systems for industrial radiography (GB/T 19348.1-2003, ISO 11699-1.1998, IDT) Qualification GB/T 26141.2 NDT radiographic film digitization systems - Part 2. Minimum requirements (GB/T 26141.2-2010, ISO 14096-2.2005, IDT)

3 Terms and Definitions

The following terms and definitions apply to this part of the GB/T 26141 of. 3.1 Radiographic film digitization systems radiographicfilmdigitisationsystem Digitizer (scanner) Followed by the completion of the following two functions. a) by means of an optical detector pair backsheet small area (pixel image unit) diffuse transmittance detection, output signals (Geometrical digitization); b) the said electrical signal into a digital value (optical density digital). 3.2 Scanning aperture scanningaperture SA It refers to the spatial extent (area) on the radiograph, digitizer to complete the scan of a pixel in this area for geometry digitization. Corresponding to the scanning aperture size. --- Rectangular aperture. Take the long sides; --- Annular aperture. Take diameter. Scanning aperture limits the spatial resolution digitizer. 3.3 Pixel size pixelsize On the scanned image, a row (horizontal) or a column (vertical) pixels from the geometric center to center adjacent. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 26141.1-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 26141.1-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 26141.1-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 26141.1-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.