GB/T 26099.2-2010 English PDF

US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26099.2-2010: General principles of three-dimensional modeling for mechanical products -- Part 2: Part modeling
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 26099.2-2010	229	Add to Cart	3 days	General principles of three-dimensional modeling for mechanical products -- Part 2: Part modeling	Valid

Similar standards

GB/T 26641   GB/T 23901.5   GB/T 23906   GB/T 26099.4   GB/T 26100   GB/T 26099.3   

Basic data

Standard ID: GB/T 26099.2-2010 (GB/T26099.2-2010)
Description (Translated English): General principles of three-dimensional modeling for mechanical products -- Part 2: Part modeling
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J04
Classification of International Standard: 01.100.01
Word Count Estimation: 10,152
Date of Issue: 1/10/2011
Date of Implementation: 10/1/2011
Quoted Standard: GB/T 4458.5; GB/T 6403.1; GB/T 6403.2; GB/T 6403.3; GB/T 6403.4; GB/T 6403.5; GB/T 24734.1; GB/T 24734.11; GB/T 26099.1
Regulation (derived from): Announcement of Newly Approved National Standards 2011 No. (No. 166 overall) 1
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Standard specifies general principles part modeling, general requirements, the detailed requirements and model simplification, inspection, and application publishing. This Standard is applicable to mechanical parts to build a three-dimensional model of the modeling process, application and management.

GB/T 26099.2-2010: General principles of three-dimensional modeling for mechanical products -- Part 2: Part modeling

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General principles of three-dimensional modeling for mechanical products Part 2. Part modeling ICS 01.100.01 J04 National Standards of People's Republic of China General rules for three-dimensional modeling of mechanical products Part 2. Part Modeling Part 2. Partmodeling Issued on. 2011-01-10 2011-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 26099-2010 "General rules for three-dimensional modeling of mechanical products" is divided into four parts. --- Part 1. General requirements; --- Part 2. part modeling; --- Part 3. assembly modeling; --- Part 4. The model projection drawing. This section GB/T 26099-2010 Part 2, "three-dimensional modeling of mechanical products general rule," the. Appendix A of this section and Appendix B is an informative annex. This part of the National Technical product documentation Standardization Technical Committee (SAC/TC146) and focal points. This part mainly drafted by. The machine Productivity Promotion Center, China Electronics Technology Group Corporation 28th Research Institute, Beijing Digital Grand Technology Company Limited, Guangxi Yuchai Machinery Co., Ltd., SAIC-GM-Wuling Automobile Co., LiuGong has Limited. The main drafters of this section. Hongqi Zhang, Xiao Chengxiang, Wang Lu, Chen Weidong, Yan Guangrong, seized Liu Hua, Yong Chun sea, Wenqiu Sheng, He Dandan, Zhang Yan, Hanlin Lin, Chen Xingyu, Wang Rui. General rules for three-dimensional modeling of mechanical products Part 2. Part Modeling

1 Scope

This section GB/T 26099 specifies the general principles of part modeling, general requirements, detailed requirements and model simplification, inspection, release And Applications. Suitable for three-dimensional modeling of mechanical parts during the construction of this part of the model, application and management.

2 Normative references

The following documents contain provisions which, through reference GB/T 26099 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 4458.5 Mechanical drawings with dimensional tolerances and injection method GB/T 6403.1 spherical radius GB/T 6403.2 lubrication grooves GB/T 6403.3 knurled GB/T 6403.4 parts rounding chamfer GB/T 6403.5 wheel overrun groove GB/T 24734.1 Technical product documentation - Digital product definition data practices - Part 1. Terms and definitions (GB/T 24734.1-2009, ISO 16792.2006, NEQ) GB/T 24734.11 Technical product documentation - Digital product definition data practices - Part 11. model geometry detail level GB/T 26099.1 General rules for three-dimensional modeling of mechanical products - Part 1. General requirements

3 Terms and Definitions

Terms and definitions GB/T 24734.1 and GB/T 26099.1 established applicable to GB/T 26099 in this section.

4 general principles and general requirements

4.1 General Principles a) part model should be able to accurately express the design information of parts; b) part model contains geometric elements of parts, elements and engineering elements of constraint; c) information on the expression of the part model should have the ability under the circumstances to ensure the design intent can be correctly updated or modified; d) does not allow the existence of redundant elements, it must not contain extraneous results and modeling geometric elements; e) Part Modeling data should be considered between links and references to the relationship between, for example, the geometric elements of the model, constraints, elements and engineering elements Between the right to establish relations of logical relationships and references, should be able to meet all kinds of information updated in real time model needs; f) should be fully reflected in the modeling design for manufacturing [DesignforManufacturing (DFM)] guidelines, improve parts can be made Manufacturability. 4.2 general requirements a) participate in three-dimensional design of mechanical parts should be three-dimensional modeling, which includes not only the self-made parts, including standard and purchased parts, etc; ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 26099.2-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 26099.2-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 26099.2-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 26099.2-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.