GB/T 26073-2010 English PDFUS$229.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 26073-2010: Safety guiding for the evaluation of toxic and flammable gas detection systems Status: Valid
Basic dataStandard ID: GB/T 26073-2010 (GB/T26073-2010)Description (Translated English): Safety guiding for the evaluation of toxic and flammable gas detection systems Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G86 Classification of International Standard: 71.040.40 Word Count Estimation: 10,112 Date of Issue: 1/10/2011 Date of Implementation: 10/1/2011 Regulation (derived from): Announcement of Newly Approved National Standards 2011 No. (No. 166 overall) 1 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Standard specifies terms and definitions used in safety monitoring of fixed gas detection system evaluation, projects and content, and gas detection techniques. This Standard is applicable to the safety evaluation of toxic and flammable gas detection systems. This standard does not apply to prescribed fire and safety regulations. GB/T 26073-2010: Safety guiding for the evaluation of toxic and flammable gas detection systems---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Safety guideling for the evaluation of toxic and flammable gas detection systems ICS 71.040.40 G86 National Standards of People's Republic of China Toxic and flammable gas detection systems Safety Evaluation Guide Issued on. 2011-01-10 2011-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThe standard equipment by the National Standardization Technical Committee and the semiconductor material (SAC/TC203) proposed. The standard equipment by the National Standardization Technical Committee and a semiconductor material gas Technical Committee (SAC/TC203/SC1) centralized. This standard was drafted. Southwest Chemical Industry Research and Design Institute, Shanghai Institute of Measurement and Testing. The main drafters of this standard. Chen Ying, Zhou Pengyun. Toxic and flammable gas detection systems Safety Evaluation Guide1 ScopeThis standard specifies the terms and definitions for safety monitoring of fixed gas detection systems evaluation, and project content, and gas detection technology. This standard applies to the safety evaluation of toxic and flammable gas detection systems. This standard does not apply to the provisions of fire and safety regulations.2 Terms and definitionsThe following terms and definitions apply to this standard. 2.1 Aging conditioning The gas sensor is exposed to the gas to be measured steps necessary to quickly stabilize its performance in. 2.2 Fail-safe relay fail-saferelay Power failure, fail-safe automatic return to the operating conditions of the alarm relay. 2.3 Filter delay filterlag Sensor due to chemical, mechanical or electronic filter caused detectable lag time. 2.4 Locking latching The alarm relay is not automatically reset after the alarm condition is removed, the alarm must be manually lifted. 2.5 Poisoning poisoning Other gases than the measured gas sensor temporarily or permanently unable to work. 2.6 Span drift spandrift Deviation from the calibration point or range of the sensor or gas detection system after running for some time. 2.7 Alternative gas surrogategas To simulate the interaction of the gas being measured and the sensor for calibration of the sensor in order to avoid or reduce the highly toxic or corrosive gases use. 2.8 Zero drift zerodrift Under normal operating conditions within the specified time interval and drift amount of zero indication. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 26073-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 26073-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 26073-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 26073-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
