GB/T 2614-2010 English PDFUS$419.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 2614-2010: Nickel-Chromium/Nickel-Silicon thermocouple wires Status: Valid GB/T 2614: Historical versions
Basic dataStandard ID: GB/T 2614-2010 (GB/T2614-2010)Description (Translated English): Nickel-Chromium/Nickel-Silicon thermocouple wires Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: N11 Classification of International Standard: 17.200.20 Word Count Estimation: 18,156 Date of Issue: 2010-12-01 Date of Implementation: 2011-05-01 Older Standard (superseded by this standard): GB/T 2614-1998 Quoted Standard: GB/T 16701; GB/T 16839.1-1997; JB/T 6819.2 Regulation (derived from): Announcement of Newly Approved National Standards No. 9, 2010 (No. 164 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the nickel-chromium nickel silicon thermocouple wire product classification, technical requirements, test methods, inspection rules, modes of supply, packaging and marking. This standard applies to the manufacture of industrial nickel-chromium nickel silicon thermocouple (K -type thermocouple) alloy wire (hereinafter referred to as dual wire). GB/T 2614-2010: Nickel-Chromium/Nickel-Silicon thermocouple wires---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Nickel-Chromium/Nickel-Silicon thermocouple wires ICS 17.200.20 N11 National Standards of People's Republic of China Replacing GB/T 2614-1998 Nickel-chromium - nickel silicon thermocouple wire Issued on. 2010-12-01 2011-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard replaces GB/T 2614-1998 "nickel-chromium - nickel silicon thermocouple wire." The main difference between this standard and GB/T 2614-1998 compared as follows. --- Thermal EMF reference ASTM E230-2003 tolerance requirements, and the original standard thermal electromotive force tolerance is used IEC 584-2.1995 requirements. --- For ease of use, it is listed in Appendix C of the standard nickel-chromium - nickel aluminum thermocouple wire unipolar platinum thermal electromotive force, in order to facilitate reference. --- The standard according to GB/T 1.1-2000 and GB/T 20000.3-2003 standard requirements of the original were edited text on modify. The Standard Appendix A, Appendix B and Appendix C are informative appendices. The standard proposed by China Machinery Industry Federation. The standard instrument functional materials by the National Standardization Technical Committee (SAC/TC419) centralized. This standard is drafted by. Chongqing Instrument Materials Research Institute. Participated in the drafting of this standard. Jiangsu Huaxin Alloy Co., Ltd., Yueqing City, east China Factory Changzhou Lucheng Albert Alloy Factory, Texas group Force Alloys Ltd., Shaoxing Chunhui Automation Instrumentation Co., Ltd., Chongqing Sichuan Instrument Automation Co., Ltd. metal functional materials at public Secretary, Shenyang Alloy Co., Ltd., China Testing Technology Research Institute, Anhui Rand Group Co., Ltd. The main drafters of this standard. Chen Lixin, Ho Ying-lun, Yuan Qin Hua, Wu Xinghua, Wang Bowei, tension group, Zou Hua, Lee joint text, Zhang Xiaohua, Zhaopu Jun, Yin into the floor. This standard replaces the standards previously issued as follows. --- GB/T 2614-1981, GB/T 2614-1985, GB/T 2614-1998. Nickel-chromium - nickel silicon thermocouple wire1 ScopeThis standard specifies the nickel-chromium - nickel silicon thermocouple wire product classification, technical requirements, test methods, inspection rules, modes of supply, packaging and Mark. This standard applies to the manufacture of industrial nickel-chromium - nickel silicon thermocouple (K type thermocouple) alloy wire (hereinafter referred to as dual wire).2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 16701 precious metal, metal thermocouple wire thermal EMF measurement GB/T 16839.1-1997 Thermocouples - Part 1. indexing table JB/T 6819.2 meter material term temperature materials3 Terms and DefinitionsTerms and definitions JB/T 6819.2 established apply to this standard.4 Products4.1 Product name, code and nominal chemical composition Product name, code and the name of the chemical composition as shown in Table 1. Table 1 Categories and nominal chemical composition Product Name polarity code Nominal chemical composition (mass fraction) /% Ni Cr Si Al Nichrome wire cathode KP 90 10 - - Nickel-silicon alloy wire negative KN 97 - 3 - NOTE. The agreement between, can supply nickel-chromium - nickel-aluminum thermocouple wire, in addition to its unipolar emf of platinum, the other technical indicators and nickel-chromium - nickel silicon thermocouple wire consistent. 4.2 grade thermocouple wire Thermocouple wire according to requirements and thermoelectric properties were divided into grade Ⅰ, grade Ⅱ and Ⅲ grade. 4.3 dual wire recommended upper temperature limit Thermocouple wire of various diameters recommended upper temperature limit as shown in Table 2. Table 2 Recommended temperature thermocouple wire Even wire diameter/mm Long-term use temperature limit/℃ Short-term temperature limit/℃ 0.3 700 800 0.5 800 900 0.8,1.0 9001000 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 2614-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 2614-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 2614-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 2614-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 2614-2010?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2614-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
