|
Std ID |
Description (Standard Title) |
|
GB/T 13652-1992
|
Surface quality of aircraft tyre
|
|
GB/T 13653-1992
|
X-ray inspection method for aircraft tyre
|
|
GB/T 13654-1992
|
Method of holographic inspection for aircraft tyre
|
|
GB/T 13655-1992
|
Static unbalance test method for aircraft tyre
|
|
GB/T 13656-1992
|
Physical properties test method for aircraft tyres
|
|
GB/T 1702-1992
|
Tyres for cycles
|
|
GB/T 1703-1992
|
Liner tubes for cycles
|
|
GB/T 1190-1991
|
Off-the-road tyres
|
|
GB/T 1192-1991
|
Agricultural tyres
|
|
GB/T 12939-1991
|
Rim contours for industrial trucks
|
|
GB/T 13202-1991
|
Series of motorcycle rims
|
|
GB/T 13203-1991
|
Strength test for motorcycle tyres
|
|
GB/T 13204-1991
|
High speed performance test for motorcycle tyres (Drum method)
|
|
GB/T 13205-1991
|
Endurance test for motorcycle tyres Drum method
|
|
GB/T 2979-1991
|
Series of agricutural tyres
|
|
GB/T 2980-1991
|
Series of off-the-road tyres
|
|
GB/T 2981-1991
|
Industrial tyres
|
|
GB/T 2982-1991
|
Series of industrial tyres
|
|
GB/T 2983-1991
|
Series of motorcycle tyres
|
|
GB/T 3900-1991
|
Tyre valve series
|
|
GB/T 2978-1989
|
Series of passenger car tyres
|
|
GB/T 3372-1989
|
Rims series for tractors, agricultural and forestry machines
|
|
GB/T 11191-1989
|
Burst pressure test method for aircraft type
|
|
GB/T 11192-1989
|
Test method of static loaded performance for aircraft tyre
|
|
GB/T 11193-1989
|
Method of measuring pneumatic aircraft tyre peripheral dimensions
|
|
GB/T 11194-1989
|
Air retention test method for tubeless aircraft tyre
|
|
GB/T 11195-1989
|
Bead fit test method for aircraft tyre
|
|
GB/T 11196-1989
|
Section diagnose and measure method for aircraft tyre
|
|
GB/T 9747-1988
|
Dynamometer test methods for aircraft tyres
|
|
GB/T 9749-1988
|
Strength performance testing method for cycle tyres
|
|
GB/T 9762-1988
|
Endurance test for cycle tyres (Drum method)
|
|
GB/T 9763-1988
|
Unseat by water pressure testing method for cycle tyres
|
|
GB/T 9768-1988
|
Regulation of application and maintenance of tyres
|
|
GB/T 9769-1988
|
Rim contour inspection
|
|
GB/T 7377-1987
|
Series of cycle tyres
|
|
GB/T 7034-1986
|
High speed test for passenger car tyres--Drum method
|
|
GB/T 4501-1984
|
Endurance test for truck and bus tyres--Drum methods
|
|
GB/T 4502-1984
|
Endurance test for passenger car tyres--Drum methods
|
|
GB/T 4504-1984
|
Bead unseating resistance test for tubeless passenger car tyres
|
|
GB/T 15340-2025
|
Rubber, raw natural and raw synthetic - Sampling and further preparative procedures
|
|
GB/T 1232.2-2025
|
Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 2: Determinations of pre-vulcanization characteristics
|
|
GB/T 18396-2025
|
Rubber latex - Determination of surface tension
|
|
GB/T 2941-2025
|
Rubber - General procedures for preparing and conditioning test pieces for physical test methods
|
|
GB/T 4498.1-2025
|
Rubber - Determination of ash - Part 1: Muffle furnace method
|
|
GB/T 45596-2025
|
Raw rubber or unvulcanized compounds - Determination of green strength
|
|
GB/T 9869.1-2025
|
Rubber - Measurement of vulcanization characteristics using curemeters - Part 1: Introduction
|
|
GB/T 9869.2-2025
|
Rubber - Measurement of vulcanization characteristics using curemeters - Part 2: Oscillating disc curemeter
|
|
GB/T 46325-2025
|
(Vulcanized rubber - Determination of free sulfur content - Gas chromatography (GC) method and high performance liquid chromatography (HPLC) method)
|
|
GB/T 46326.2-2025
|
(Rubber products - Determination of toxic and harmful substances - Part 2: Short chain chlorinated paraffins (SCCPs))
|
|
GB/T 39693.2-2025
|
Rubber, vulcanized or thermoplastic - Determination of hardness - Part 2: Hardness between 10 IRHD and 100 IRHD
|
|
GB/T 39693.4-2025
|
Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)
|
|
GB/T 39693.5-2025
|
Rubber, vulcanized or thermoplastic - Determination of hardness - Part 5: Indentation hardness by IRHD pocket meter method
|
|
GB/T 46232-2025
|
Rubber, unvulcanized - Determination of bound-rubber content
|
|
GB/T 9869.3-2025
|
Rubber - Measurement of vulcanization characteristics using curemeters - Part 3: Rotorless curemeter
|
|
GB/T 43751-2024
|
Rubber and rubber products - Guidance on the application of statistics to physical testing
|
|
GB/T 3516-2024
|
Rubber - Determination of solvent extract
|
|
GB/T 42519-2023
|
Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
|
|
GB/T 8291-2023
|
Rubber latex - Determination of coagulum content(sieve residue)
|
|
GB/T 3510-2023
|
Rubber, unvulcanized - Determination of plasticity - Rapid-plastimeter method
|
|
GB/T 41939-2022
|
Rubber - Determination of magnesium content by atomic absorption spectrometry
|
|
GB/T 41940-2022
|
Rubber - Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
|
|
GB/T 41941-2022
|
Rubber, vulcanized - Measurement of fatigue crack growth rate
|
|
GB/T 41945-2022
|
Rubber, raw, vulcanized - Determination of metal content by ICP-OES
|
|
GB/T 41946-2022
|
Rubber - Determination of total sulfur content - Ion chromatography method
|
|
GB/T 42122-2022
|
Rubber, vulcanized or thermoplastic - Determination of abrasion resistance(the method of Improved Lambourn test machine)
|
|
GB/T 42278-2022
|
Rubber, vulcanized - Determination of stress in tension upon heating
|
|
GB/T 42279-2022
|
Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
|
|
GB/T 39693.3-2021
|
Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3: Dead-load hardness using the very low rubber hardness(VLRH) scale
|
|
GB/T 1232.3-2021
|
Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 3: Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR
|
|
GB/T 1687.4-2021
|
Rubber, vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - Part 4: Constant-stress flexometer
|
|
GB/T 18012-2021
|
Rubber latex - Determination of pH
|
|
GB/T 29614-2021
|
Vulcanized rubber - Determination the content of polycyclic aromatic hydrocarbons
|
|
GB/T 39693.9-2021
|
Rubber, vulcanized or thermoplastic - Determination of hardness - Part 9: Calibration and verification of hardness testers
|
|
GB/T 40719-2021
|
Rubber, vulcanized or thermoplastic - Determination of volume and/or surface resistivity
|
|
GB/T 40720-2021
|
Rubber, vulcanized rubber - Determination of insulation resistance
|
|
GB/T 40721-2021
|
Rubber - Determination of frictional properties
|
|
GB/T 40723-2021
|
Rubber - Determination the contents of total sulfur and total nitrogen - Automatic analyser method
|
|
GB/T 40797-2021
|
Rubber, vulcanized or thermoplastic - Determination of resistance to abrasion - Driven, vertical abrasive disc method
|
|
GB/T 8290-2021
|
Rubber latex - Sampling
|
|
GB/T 39059-2020
|
Determination of harmful substance emissions from synthetic sports surfaces - Environmental chambers method
|
|
GB/T 39692-2020
|
Rubber, vulcanized or thermoplastic. Low temperature testing. General introduction and guide
|
|
GB/T 39695-2020
|
Identification of volatile components of rubber fumes. Thermodesorption and gas chromatographic method with mass spectrometric detection
|
|
GB/T 39699-2020
|
Rubber. Identification of polymers. Pyrolytic gas-chromatographic method using mass-spectrometric detection
|
|
GB/T 6036-2020
|
Rubber, vulcanized or thermoplastic. Determination of low-temperature stiffening(Gehman test)
|
|
GB/T 7758-2020
|
Rubber, vulcanized. Determination of low-temperature characteristics. Temperature-retraction procedure (TR test)
|
|
GB/T 7528-2019
|
Rubber and plastics hoses and hose assemblies - Vocabulary
|
|
GB/T 1685.2-2019
|
Rubber, vulcanized or thermoplastic -- Determination of stress relaxation in compression -- Part 2: Testing with temperature cycling
|
|
GB/T 17783-2019
|
Rubber, vulcanized or thermoplastic - Chemical tests - Preparation of samples and test piece
|
|
GB/T 7755.2-2019
|
Rubber, vulcanized or thermoplastic -- Determination of permeability to gases -- Part 2: Equal-pressure methods
|
|
GB/T 1683-2018
|
Rubber, Vulcanized - Determination of Compression Set at Constant Strain
|
|
GB/T 35804-2018
|
Rubber, vulcanized or thermoplastic -- Resistance to ozone cracking -- Test methods for determining the ozone concentration in laboratory test chambers
|
|
GB/T 35807-2018
|
Rubber, vulcanized -- Determination of thermal diffusivity -- Flash method
|
|
GB/T 3511-2018
|
Rubber, vulcanized or thermoplastic -- Resistance to weathering
|
|
GB/T 35858-2018
|
Rubber, vulcanized -- Test method of salt mist aging
|
|
GB/T 14837.3-2018
|
Rubber and rubber products -- Determination of the composition of vulcanizates and uncured compounds by thermogravimetry -- Part 3: Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers after extraction
|
|
GB/T 15904-2018
|
Rubber -- Determination of polyisoprene content
|
|
GB/T 24131.1-2018
|
Rubber, raw -- Determination of volatile matter content -- Part 1: Hot-mill method and oven method
|
|
GB/T 3513-2018
|
Rubber, vulcanized -- Determination of adhesion to single wire -- Pull out test
|
|
GB/T 36691-2018
|
Methyl vinyl silicone rubber -- Determination of vinyl content -- Near infrared spectroscopy
|
|
GB/T 36763-2018
|
General requirements for electromagnetic shielding elastomer
|