GB/T 40797-2021 PDF in English
GB/T 40797-2021 (GB/T40797-2021, GBT 40797-2021, GBT40797-2021)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 40797-2021 | English | 205 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Rubber, vulcanized or thermoplastic -- Determination of resistance to abrasion -- Driven, vertical abrasive disc method
| Valid |
Standards related to (historical): GB/T 40797-2021
PDF Preview
GB/T 40797-2021: PDF in English (GBT 40797-2021) GB/T 40797-2021
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 83.060
CCS G 40
GB/T 40797-2021 / ISO 23233:2016
Rubber, vulcanized or thermoplastic - Determination of
resistance to abrasion - Driven, vertical abrasive disc
method
(ISO 23233:2016, Rubber, vulcanized or thermoplastic - Determination of resistance
to abrasion using a driven, vertical abrasive disc, IDT)
ISSUED ON: OCTOBER 11, 2021
IMPLEMENTED ON: MAY 01, 2022
Issued by: State Administration for Market Regulation;
Standardization Administration of the People's Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Terms and definitions... 6
4 Test principle ... 7
5 Instruments and equipment ... 7
6 Specimen ... 10
7 Adjustment ... 10
8 Test temperature ... 10
9 Test conditions ... 11
10 Steps ... 13
11 Result expression ... 14
12 Test report ... 15
Bibliography... 16
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2020
“Directives for standardization - Part 1: Rules for the structure and drafting of
standardizing documents”.
This Standard uses translation method to identically adopt ISO 23233:2016 “Rubber,
vulcanized or thermoplastic - Determination of resistance to abrasion using a driven,
vertical abrasive disc”.
The Chinese documents which have consistency with the international normative
references in this Standard are as follows:
- GB/T 2481.1-1998, Bonded abrasives - Determination and designation of grain
size distribution - Part 1: Macrogrits F4 to F220 (eqv ISO 8486-1:1996);
- GB/T 2484-2018, Bonded abrasive products - General requirements (ISO 525:2013,
MOD);
- GB/T 2941-2006, Rubber - General procedures for preparing and conditioning test
pieces for physical test methods (ISO 23529:2004, IDT).
This Standard made the following editorial modifications:
- Changed the standard name to “Rubber, vulcanized or thermoplastic -
Determination of resistance to abrasion - Driven, vertical abrasive disc method”;
- Included the content of the amendment of ISO 23233:2016/AMD1:2017.
Attention is drawn to the possibility that some of the elements of this Standard may be
the subject of patent rights. The issuing authority shall not be held responsible for
identifying any or all such patent rights.
This Standard was proposed by China Petroleum and Chemical Industry Federation.
This Standard shall be under the jurisdiction of Subcommittee on General Test methods
of National Technical Committee on Rubber and Rubber Products of Standardization
Administration of China (SAC/TC 35/SC 2).
The drafting organizations of this Standard: Zhongce Rubber Group Co., Ltd.,
Shuangqian Group Shanghai Tire Research Institute Co., Ltd., Wanli Tire Co., Ltd.,
Shandong Linglong Tire Co., Ltd., Triangle Tire Co., Ltd., Sailun Group Co., Ltd.,
Double Star Group Co., Ltd., Gotwell Scientific Instruments (Qingdao) Co., Ltd.,
Fengshen Tire Co., Ltd., Guizhou Tire Co., Ltd., Beijing Rubber Industry Research and
Design Institute Co., Ltd.
Rubber, vulcanized or thermoplastic - Determination of
resistance to abrasion - Driven, vertical abrasive disc
method
WARNING 1 -- Persons using this document shall have practical experience with
formal laboratory work. This document does not point out all possible safety issues.
It is the user's responsibility to take appropriate safety and health measures and
to ensure compliance with the relevant national regulations.
WARNING 2 -- Some of the steps specified in this document may involve the use
or generation of certain wastes, which may be hazardous to the local environment.
Appropriate safe handling and post-use disposal provisions shall be specified in
the relevant documentation.
1 Scope
This Standard describes a method for determining the abrasion resistance of rubber with
a vertically driven abrasive disc.
The wheel-shaped rubber specimen and the grinding disc are perpendicular to each
other and are pressed against each other according to the set load. Abrasion mass loss
is determined by setting different slip angles, rotational speeds and certain loads
between the wheel-shaped specimen and the grinding disc for slippage. Test results are
expressed in terms of mass loss per unit run distance and/or abrasion resistance index
compared to a reference compound.
This document applies to comparative testing, quality control, normative compliance
testing, arbitration testing, and R&D work.
Since the test device can independently set various wear parameters, such as: slip angle,
grinding disc rotation speed and load, this method can be widely used in the wear test
of various rubber products (especially tires).
2 Normative references
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
ISO 525, Bonded abrasive products - General requirements
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|