|
Std ID |
Description (Standard Title) |
|
GB/T 24824-2009
|
Measurement methods of LED modules for general lighting
|
|
GB/T 24826-2009
|
Terms and definitions of LEDs and LED modules for general lighting
|
|
GB/T 21656-2008
|
International lamp coding system (ILCOS)
|
|
GB/T 22908-2008
|
Fluorescent lamp waste recycling technical specifications
|
|
GB/T 23113-2008
|
Measurement of mercury level in fluorescent lamps
|
|
GB/T 23138-2008
|
Cathode for neon lamps
|
|
GB/T 3978-2008
|
Standard illuminants and geometric conditions
|
|
GB/T 21094-2007
|
Pre-heat requirements for starterless tubular fluorescent lamps
|
|
GB/T 21096-2007
|
Health requirements and methods of measurement of the ultraviolet radiation of the UV lamp
|
|
GB/T 20143-2006
|
Procedure for use in the preparation of maximum lamp outlines
|
|
GB/T 20145-2006
|
Photobiological safety of lamps and lamp systems
|
|
GB/T 20146-2006
|
CIE standard illuminants for colorimetry
|
|
GB/T 20147-2006
|
CIE standard colorimetric observers
|
|
GB/T 20148-2006
|
Spatial Distribution of Daylight -- CIE Standard General Sky
|
|
GB/T 20149-2006
|
Road traffic lights -- Photometric properties of 200 mm roundel signals
|
|
GB/T 20150-2006
|
Erythema reference action spectrum and standard erythema dose
|
|
GB/T 20152-2006
|
Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps
|
|
GB/T 20153-2006
|
Classification and interpretation of new lighting products
|
|
GB/T 19658-2005
|
Reflector lamps center beam intensity and beam angle measurement method
|
|
GB/T 2900.65-2004
|
Electrotechnical terminology -- Lighting
|
|
GB/T 7249-2002
|
The incandescent largest Dimension
|
|
GB/T 14218-1993
|
Electronic lighting control equipment. Performance, Parameters and measurement methods
|
|
GB/T 13582-1992
|
Generic specification for electronic lighting control equipments
|
|
GB/T 7249-1987
|
Maximum lamp outlines for general lighting lamps
|
|
GB/T 7451-1987
|
Electric light source vocabulary
|
|
GB/T 18034-2000
|
Specification for the platinum rhodium thermocouple thin wires used in mini-thermocouples
|
|
GB/T 32517-2024
|
Installation couplers intended for permanent connection in fixed installations
|
|
GB/T 19215.5-2023
|
Cable trunking systems and cable ducting systems for electrical installations - Part 2: Particular requirements - Section 3: Slotted cable trunking systems intended for installation in cabinets
|
|
GB/T 42324-2023
|
Cable glands for electrical installations
|
|
GB/T 42394-2023
|
Cable cleats for electrical installations
|
|
GB/T 42827-2023
|
A. C. ventilating fans and regulators for household and similar purposes - Methods for measuring performance
|
|
GB/T 43552-2023
|
Comfort fans and regulators for household and similar purposes - Methods for measuring performance
|
|
GB/T 17466.21-2022
|
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 21: Particular requirements for boxes and enclosures with provision for suspension means
|
|
GB/T 17466.22-2022
|
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 22: Particular requirements for connecting boxes and enclosures
|
|
GB/T 17466.23-2022
|
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 23: Particular requirements for floor boxes and enclosures
|
|
GB/T 17465.1-2022
|
Appliance couplers for household and similar general purposes - Part 1: General requirements
|
|
GB/T 17465.6-2022
|
Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges
|
|
GB/T 38127-2019
|
Articulated systems and flexible systems for cable guiding
|
|
GB/T 17466.1-2019
|
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations -- Part 1: General requirements
|
|
GB/T 38280-2019
|
Cable management systems - Specifications for conduit fittings and accessories for cable installations for extra heavy-duty electrical steel conduit
|
|
GB/T 38281.1-2019
|
Indicator light units for household and similar fixed-electrical installations -- Part 1: General requirements
|
|
GB/T 13380-2018
|
A.C. electric fans and regulators
|
|
GB/T 23639-2017
|
Energy conservation and corrosion-resistant steel-made cable support system
|
|
GB/T 17465.5-2017
|
Appliance couplers for household and similar general purposes -- Part 2-1: Sewing machine couplers
|
|
GB/T 17466.24-2017
|
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations -- Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment
|
|
GB/T 19215.4-2017
|
Cable trunking and ducting systems for electrical installations -- Part 2: Particular requirements -- Section 4: Service poles
|
|
GB/T 19637-2017
|
Electrical accessories -- Cable reels for household and similar purposes
|
|
GB/T 20041.21-2017
|
Conduit systems for cable management -- Part 21: Particular requirement for rigid conduit systems
|
|
GB/T 34135-2017
|
Industrial cable reels
|
|
GB/T 20041.25-2016
|
Conduit systems for cable management -- Part 25: Particular requirements for conduit fixing devices
|
|
GB/T 32517-2016
|
Installation couplers intended for permanent connection in fixed installations
|
|
GB/T 20041.1-2015
|
Conduit systems for cable management -- Part 1: General requirements
|
|
GB/T 31463.1-2015
|
Devices for the connection of luminaires for household and similar purposes -- Part 1: General requirements
|
|
GB/T 31463.2-2015
|
Devices for the connection of luminaires for household and similar purposes -- Part 2: Standard sheets for DCL
|
|
GB/T 17465.4-2015
|
Appliance couplers for household and similar general purposes -- Part 2-4: Couplers dependent on appliance weight for engagement
|
|
GB/T 28198-2011
|
Ventilator for windows
|
|
GB/T 23639-2009
|
Energy conservation and corrosion-resistant steel-made cable support system
|
|
GB/T 21762-2008
|
Cable management -- Cable tray systems and cable ladder systems
|
|
GB/T 22763-2008
|
Electrical accessories -- Big size sealed screwed plug
|
|
GB/T 13380-2007
|
A.C. electric fans and regulators
|
|
GB/T 19637-2005
|
Electrical accessories -- Cable reels for household and similar purposes
|
|
GB/T 20041.1-2005
|
Electrical Installation Conduit systems -- Part 1: General requirements
|
|
GB/T 19215.1-2003
|
Cable trunking and ducting systems for electrical installations -- Part 1: General requirements
|
|
GB/T 19215.2-2003
|
Cable trunking and ducting systems for electrical installations -- Part 2: Particular requirements Section 1: Cable trunking and ducting systems intended for mounting on walls or ceilings
|
|
GB/T 8623-1988
|
Metal tube far infraed heater
|
|
GB/T 7287.10-1987
|
Measuring method for normal spectral emittance of infrared heater
|
|
GB/T 7287.11-1987
|
Test method for lifetime of infrared heater
|
|
GB/T 7287.1-1987
|
Detecting method for size, shape and exterior of infrared heater
|
|
GB/T 7287.12-1987
|
Test method for vibration of infrared heater
|
|
GB/T 7287.2-1987
|
Measuring method for the surface temperature distribution of infrared heater
|
|
GB/T 7287.3-1987
|
Measuring method for the radio between radiant surface and rear surface of infrared heater
|
|
GB/T 7287.4-1987
|
Measuring method for temperature rise time and fall time of infrared heater
|
|
GB/T 7287.5-1987
|
Testing method for bearing cold and hot alternating change of infrared heater
|
|
GB/T 7287.6-1987
|
Measuring method for insulation resistance of infrared heater
|
|
GB/T 7287.7-1987
|
Measuring method for electric-to-radiant power transfer efficiency of infrared heater
|
|
GB/T 7287.8-1987
|
Measuring method for power deviation rate of infrared heater
|
|
GB/T 7287.9-1987
|
Measuring method for normal total emittance of infrared heater
|
|
GB/T 9536.1-2024
|
Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification
|
|
GB/T 15092.3-2023
|
Switches for appliances - Part 2-5: Particular requirements for change-over selectors
|
|
GB/T 15092.2-2023
|
Switches for appliances - Part 2-1: Particular requirements for cord switches
|
|
GB/T 15092.4-2023
|
Switches for appliances - Part 2-4: Particular requirements for independently mounted switches
|
|
GB/T 3883.208-2023
|
Safety of motor-operated hand-held, transportable and garden tools - Part 208: Particular requirements for hand-held shears and nibblers
|
|
GB/T 3883.217-2023
|
Safety of motor-operated hand-held, transportable and garden tools - Part 217: Particular requirements for hand-held routers
|
|
GB/T 3883.401-2023
|
Safety of motor-operated hand-held, transportable and garden tools - Part 401: Particular requirements for chain saws
|
|
GB/T 3883.402-2023
|
Safety of motor-operated hand-held, transportable and garden tools - Part 402: Particular requirements for hedge trimmers
|
|
GB/T 3883.215-2022
|
Safety of motor-operated hand-held, transportable and garden tools - Part 215: Particular requirements for hand-held mixers
|
|
GB/T 3883.209-2021
|
Safety of motor-operated hand-held, transportable and garden tools - Part 209: Particular requirements for hand-held tappers and threaders
|
|
GB/T 3883.211-2021
|
Safety of motor-operated hand-held, transportable and garden tools - Part 211: Particular requirements for hand-held reciprocating saws
|
|
GB/T 3883.302-2021
|
Safety of motor-operated hand-held, transportable and garden tools - Part 302: Particular requirements for transportable table saws
|
|
GB/T 3883.305-2021
|
Safety of motor-operated hand-held, transportable and garden tools - Part 305: Particular requirements for transportable bench grinders
|
|
GB/T 3883.309-2021
|
Safety of motor-operated hand-held, transportable and garden tools - Part 309: Particular requirements for transportable mitre saws
|
|
GB/T 4706.110-2021
|
Safety of household and similar electrical appliances - Part 2: Particular requirements for robotic battery powered electrical lawnmowers
|
|
GB/T 15092.101-2020
|
Switches for appliances - Part 1-1: Requirements for mechanical switches
|
|
GB/T 15092.102-2020
|
Switches for appliances - Part 1-2: Requirements for electronic switches
|
|
GB/T 15092.1-2020
|
Switches for appliances - Part 1: General requirements
|
|
GB/T 4343.2-2020
|
Electromagnetic compatibility requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity
|
|
GB/T 3883.202-2019
|
Safety of motor-operated hand-held, transportable and garden tools -- Part 202: Particular requirements for hand-held screwdrivers and impact wrenches
|
|
GB/T 3883.204-2019
|
Safety of motor-operated hand-held, transportable and garden tools -- Part 204: Particular requirements for hand-held sanders and polishers other than disc type
|
|
GB/T 3883.205-2019
|
Safety of motor-operated hand-held, transportable and garden tools -- Part 205: Particular requirements for hand-held circular saws
|
|
GB/T 3883.210-2019
|
Safety of motor-operated hand-held, transportable and garden tools -- Part 210: Particular requirements for hand-held planers
|