|
US$454.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 3883.211-2021: Safety of motor-operated hand-held, transportable and garden tools - Part 211: Particular requirements for hand-held reciprocating saws
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 3883.211-2021 | English | 454 |
Add to Cart
|
5 days [Need to translate]
|
Safety of motor-operated hand-held, transportable and garden tools - Part 211: Particular requirements for hand-held reciprocating saws
| Valid |
GB/T 3883.211-2021
|
PDF similar to GB/T 3883.211-2021
Basic data | Standard ID | GB/T 3883.211-2021 (GB/T3883.211-2021) | | Description (Translated English) | Safety of motor-operated hand-held, transportable and garden tools - Part 211: Particular requirements for hand-held reciprocating saws | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K64 | | Word Count Estimation | 24,257 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 3883.211-2021: Safety of motor-operated hand-held, transportable and garden tools - Part 211: Particular requirements for hand-held reciprocating saws
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Safety of motor-operated hand-held, transportable and garden tools-Part 211.Particular requirements for hand-held reciprocating saws
ICS 25.140.20
CCSK64
National Standards of People's Republic of China
Replace GB/T 3883.11-2012
Safety of hand-held and portable electric tools and garden tools
Part 211.Particular requirements for hand-held reciprocating saws
(IEC 62841-2-11.2015, Electricmotor-operatedhand-heldtools, transportable
Released on 2021-04-30 and implemented on 2021-11-01
State Administration of Market Supervision and Administration
Issued by the National Standardization Management Committee
Table of contents
Foreword Ⅲ
Introduction Ⅴ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 General requirements 1
5 Test general conditions 1
6 Radiation, toxicity and similar hazards 2
7 Category 2
8 Signs and instructions 2
9 Protection against touching live parts 2
10 Start 2
11 Input power and current 2
12 Fever 2
13 Heat resistance and flame resistance 3
14 Moisture resistance 3
15 Anti-rust 3
16 Overload protection of transformers and related circuits 3
17 Durability 3
18 Abnormal operation 3
19 Mechanical hazards 3
20 Mechanical strength 4
21 Structure 4
22 Internal wiring 4
23 Components 4
24 Power connection and external flexible cord 5
25 Terminals for external wires 5
26 Grounding device 5
27 Screws and connectors 5
28 Creepage distance, electrical clearance and insulation penetration distance 5
Appendix 9
Appendix I (informative) Measurement of noise and vibration 10
Appendix K (Normative) Battery-powered tools and battery packs 16
Appendix L (Normative) Battery-powered tools and battery packs that provide power connections or non-isolated sources 17
Reference 18
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"
Drafting.
This document is part 211 of GB/T 3883 "Safety of Handheld and Portable Electric Tools and Garden Tools". "Handheld, removable
Hand-held power tools in Part 2 of "Safety of Portable Power Tools and Garden Tools", currently consists of the following 7 parts.
---GB/T 3883.201-2017 Safety of hand-held and portable electric tools and garden tools Part 2.Electric drills and impact
Special requirements for electric drills;
---GB/T 3883.202-2019 Safety of hand-held and portable electric tools and garden tools Part 202.Hand-held screws
Special requirements for wire cutters and impact wrenches;
---GB/T 3883.204-2019 The safety of hand-held, portable electric tools and garden tools Part 204.Hand-held non-
Special requirements for disc sander and polishing machine;
---GB/T 3883.205-2019 Safety of hand-held and portable electric tools and garden tools Part 205.Hand-held circular
Special requirements for saws;
---GB/T 3883.209-2021 Safety of hand-held, portable electric tools and garden tools Part 209.Hand-held attack
Special requirements for threading machine and pipe threading machine;
---GB/T 3883.210-2019 Safety of hand-held and portable electric tools and garden tools Part 210.Hand-held electric tools
Special requirements for planing;
Special requirements for double sawing.
This document replaces GB/T 3883.11-2012 "Safety of hand-held electric tools Part 2.Reciprocating saws (jig saws, knife saws)
Compared with GB/T 3883.11-2012, the main technical changes are as follows.
1) Test general conditions. increase the description of the quality of the reciprocating saw (see Chapter 5, Chapter 5 of the.2012 edition);
2) Marks and instructions. the original 8.12.1.1 was moved to 8.14.1.101, and b) was added; the description of 8.14.2b) and c) was added (see Chapter 8,
Chapter 8 of the.2012 edition);
3) Abnormal operation. Modify Table 4 of Part 1 (see Chapter 18, Chapter 18 of the.2012 edition);
4) Mechanical hazard. the original content of 19.1 is moved to 19.101, and relevant modifications are made (see Chapter 19, Chapter 19 of the.2012 edition);
5) Structure. add 21.18.1.1 (see Chapter 21, Chapter 21 of the.2012 edition);
6) Components. 23.3 Replacement of the first paragraph (see Chapter 23, Chapter 23 of the.2012 edition);
7) Add an informative appendix "Measurement of Noise and Vibration" (see Appendix I).
The translation method used in this document is equivalent to IEC 62841-2-11.2015 ``Electric Motor Driven Handheld and Portable Electric Tools and Gardens
Machine Safety Part 2-11.Particular Requirements for Hand-held Reciprocating Saws.
This document has made the following editorial changes.
---The standard name was revised to "Safety of hand-held, portable electric tools and garden tools Part 211.Hand-held reciprocating saws
Specific requirements";
---Incorporated the revised content of IEC 62841-2-11.2015/AMD1.2018, 8.14.1.101 and K.8.14.1.101 warning addition
Serial number; 19.1012) Change the sawtooth plane to the center plane of the saw blade, and add Figure 104; add 20.5; add 21.18.1.2 and 21.35
Not applicable; increase by 21.30.The position of the outer margin of the terms involved is marked with a vertical double line (‖).
This document shall be in accordance with GB/T 3883.1-2014 "Safety of Handheld and Portable Electric Tools and Garden Tools Part 1.General Requirements"
Seek to be used together.
The “applicable” part of this document indicates that the corresponding clauses in GB/T 3883.1-2014 apply; the “replacement” part of this document,
The terms in this document shall prevail; the part in this document that states "modification" indicates the relevant provisions of GB/T 3883.1-2014
The content shall be subject to the revised content of this document, and the other content in this clause still applies; the “increase” part of this document indicates that in addition to
In addition to complying with the corresponding provisions of GB/T 3883.1-2014, it should also comply with the additional provisions of this document.
This document was proposed by the China Electrical Equipment Industry Association.
This document is under the jurisdiction of the National Electric Tool Standardization Technical Committee (SAC/TC68).
Drafting organizations of this document. Baoshide Technology (China) Co., Ltd., Shanghai Power Tool Research Institute (Group) Co., Ltd., Zhejiang Yate Electric
Co., Ltd., Jiangsu SUMEC Hardware Tools Co., Ltd., Nanjing Deshuo Industrial Co., Ltd., Ruiqi Holding Co., Ltd.
The main drafters of this document. Ding Yucai, Pan Shunfang, Ding Junfeng, Lin Youyu, Gao Yang, Zhu Xianbo, Cao Zhenhua, Chen Jianqiu.
The previous versions of the documents replaced by this document are as follows.
---GB 3883.11-1985, GB 3883.11-1991, GB 3883.11-2005, GB/T 3883.11-2012.
Introduction
In.2014, my country issued the national standard GB/T 3883.1-2014 ``Safety No. of Handheld and Portable Power Tools and Garden Tools''
Part 1.General Requirements, the original GB/T 3883 (part of hand-held power tools), GB/T 13960 (part of portable power tools) and
The common technical requirements of the general safety standards for the three major series of electric tools in GB/T 4706 (only for garden power tools) have been integrated.
There are 3 parts in the special requirements for specific types of small products that are used in conjunction with GB/T 3883.1-2014.
Portable power tools part), part 3 (portable power tools part), and part 4 (garden power tools part), all transform the corresponding country
The specific requirements of the international standard IEC 62841 series.
The main element of the standard name is expanded to "safety of hand-held, portable power tools and garden tools", and the original hand-held power tools are used
Part of the standard number GB/T 3883.The standard sub-part number of each sub-category product consists of three digits, of which the first digit
Indicates the corresponding part, the 2nd and 3rd digits indicate different subcategories.
The new version of the GB/T 3883 series of standards will form a more scientific, complete, universal, and unified series of safety standards for electric tool products
The system makes the implementation of the standard more practical and convenient to use.
At present, the new version of GB/T 3883 series standard "Handheld Power Tools Part" has published standards as follows.
---GB/T 3883.201-2017 Safety of hand-held and portable electric tools and garden tools Part 2.Electric drills and impact
Special requirements for electric drills;
---GB/T 3883.202-2019 Safety of hand-held and portable electric tools and garden tools Part 202.Hand-held screws
Special requirements for wire cutters and impact wrenches;
---GB/T 3883.204-2019 The safety of hand-held, portable electric tools and garden tools Part 204.Hand-held non-
Special requirements for disc sander and polishing machine;
---GB/T 3883.205-2019 Safety of hand-held and portable electric tools and garden tools Part 205.Hand-held circular
Special requirements for saws;
---GB/T 3883.209-2021 Safety of hand-held, portable electric tools and garden tools Part 209.Hand-held attack
Special requirements for threading machine and pipe threading machine;
---GB/T 3883.210-2019 Safety of hand-held and portable electric tools and garden tools Part 210.Hand-held electric tools
Special requirements for planing;
Special requirements for double sawing.
The following standards will be revised in the future.
---GB/T 3883.3-2007 The safety of hand-held electric tools Part 2.The specialization of grinders, polishing machines and disc sanders
Use requirements;
---GB/T 3883.7-2012 Safety of hand-held electric tools Part 2.Special requirements for hammer tools;
---GB/T 3883.8-2012 Safety of hand-held electric tools Part 2.Special requirements for electric scissors and electric punching shears;
---GB/T 3883.12-2012 Safety of hand-held electric tools Part 2.Specific requirements for concrete vibrators;
---GB/T 3883.13-1992 Safety of hand-held electric tools Part 2.Special requirements for non-flammable liquid electric spray guns;
---GB/T 3883.16-2008 Safety of hand-held electric tools Part 2.Special requirements for nailing machines;
---GB/T 3883.17-2005 Safety of hand-held electric tools Part 2.Special requirements for wood milling and trimming machines;
---GB/T 3883.18-2009 Safety of hand-held electric tools Part 2.Special requirements for stone cutting machines;
---GB/T 3883.19-2012 Safety of hand-held electric tools Part 2.Special requirements for pipe dredging machines;
---GB/T 3883.20-2012 Safety of hand-held electric tools Part 2.Special requirements for strapping machines;
---GB/T 3883.21-2012 Safety of hand-held electric tools Part 2.Special requirements for band saws;
---GB/T 3883.22-2008 Safety of hand-held electric tools Part 2.Special requirements for slotting machines.
Safety of hand-held and portable electric tools and garden tools
Part 211.Particular requirements for hand-held reciprocating saws
1 Scope
In addition to the following provisions, this chapter of GB/T 3883.1-2014 applies.
increase.
This document applies to reciprocating saws, such as jig saws and knife saws.
2 Normative references
In addition to the following provisions, this chapter of GB/T 3883.1-2014 applies.
increase.
ISO 16893-1.2008 Wood-based panels-Particleboard Part 1.Classification (Woodbasedpanels-Particleboard-
Part 1.Classifications)
3 Terms and definitions
In addition to the following provisions, this chapter of GB/T 3883.1-2014 applies.
increase.
3.101
Reciprocating saw
A tool that uses one or more saw blades to reciprocate or swing back and forth to saw various materials.
3.102
Jigsaw
With the reciprocating saw equipped with the bottom plate, the tilt angle of the bottom plate can be adjusted.
Note. The typical design of a jig saw is shown in Figure 102.
3.103
Sabresaw
A reciprocating saw equipped with a guide plate, which allows tilting movement.
Note. The typical design of a knife saw is shown in Figure 103.
4 General requirements
This chapter of GB/T 3883.1-2014 is applicable.
5 Test general conditions
In addition to the following provisions, this chapter of GB/T 3883.1-2014 applies.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 3883.211-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 3883.211-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 3883.211-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3883.211-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|