|
US$989.00 · In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 31463.1-2015: Devices for the connection of luminaires for household and similar purposes -- Part 1: General requirements
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 31463.1-2015 | English | 989 |
Add to Cart
|
7 days [Need to translate]
|
Devices for the connection of luminaires for household and similar purposes -- Part 1: General requirements
| Valid |
GB/T 31463.1-2015
|
PDF similar to GB/T 31463.1-2015
Basic data | Standard ID | GB/T 31463.1-2015 (GB/T31463.1-2015) | | Description (Translated English) | Devices for the connection of luminaires for household and similar purposes -- Part 1: General requirements | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K65 | | Classification of International Standard | 29.120.30 | | Word Count Estimation | 47,443 | | Date of Issue | 2015-09-11 | | Date of Implementation | 2016-04-01 | | Regulation (derived from) | National Standard Announcement 2015 No.25 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 31463.1-2015: Devices for the connection of luminaires for household and similar purposes -- Part 1: General requirements
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Devices for the connection of luminaires for household and similar purposes - Part 1. General requirements
ICS 29.120.30
K65
National Standards of People's Republic of China
Connecting device for household and similar fixtures
Part 1. General requirements
Part 1. Generalrequirements
(IEC 61995-1.2005, MOD)
Issued on. 2015-09-11
2016-04-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions 2
4 3 General requirements
5 General notes on 4
Rating 4 6
7 Category 4
8 logo 5
Check 9 size 6
7 10 Protection against electric shock
11 grounding 8
12 Terminals and terminations 8
Structure 13 DCL outlet 15
14 DCL plug structure 17
15 anti-aging and moisture 19
16 Insulation resistance and electric strength 19
17 ground contacts work 20
18 Breaking capacity 20
19 21 temperature
20 is inserted and the force required to pull the plug 22
21 soft and cable connection 22
Mechanical strength 23 22
23 Heat 27
24 Screws, current-carrying parts and connections 27
25 creepage distance, electrical clearance and penetrating sealant 28
Abnormal heat-resistant, flame-resistant and electrically insulating material 26 of the 30 marks
27 anti-rust properties 31
28 Electromagnetic compatibility (EMC) requirements 31
References 42
1 means 32 for checking conductor Injury Figure
Figure 2 illustrates the bending test 33
Figure 3 a circuit diagram of the temperature rise test 34
Figure 4 Test soft cable retention means 35
FIG. 5 A, B, C and D site impact schematic 36
6 test device lid or cover Figure 37
7 inspection cover or cover profile by means of the gauge (thickness 2mm) 37
8 vector without screws on the mounting surface or support surface of the cover of FIG. 7 using conventional example of FIG. 38
9 22.6 required the use of an example of FIG. 7 gauge 39
10 test trenches, holes and reverse taper with the amount of regulation 40
Regulation of the amount applied direction Figure 11 Figure 10 a schematic 40
12 Ball pressure test device 41
Table 1 copper conductors connected 9
Table 2 value of 10 for checking conductor Injury
Table 3 Rally value 10
Table 10 Structure 4 conductors
Table 5 screw torque values \u200b\u200b11
Table 6 test is used to check the current 13 screwless terminals
Table 7 bending test conductor 14
Table 8 Test bending force value of 14
Table force nine pairs of screws do not rely on the cover, the cover plate 16 applied
Table 10 Test temperature rise test sequence 22
Table 11 soft rope holding cable size test 23
12 Table 24 List of mechanical strength test
Table 13 impact test drop height 24
Distance Table 14 creepage distances, clearances and penetrating sealant 29
Foreword
GB/T 31463 "Household and similar fixtures connecting means" is divided into two parts.
--- Part 1. General requirements;
Part --- Article 2. DCL using standard sheet.
This part of GB/T 31463 Part 1.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This section uses redrafted law revision using IEC 61995-1.2005 (First Edition) "Household and similar fixtures connecting means
Part 1. General requirements. "
This part of IEC 61995-1.2005 and its technical differences for the following reasons.
--- On normative references, this part has been adjusted technical differences, in order to adapt our technical conditions, the adjusted situation
Focus is reflected in the status of Chapter 2, "Normative references", the specific adjustments are as follows.
● with the GB/T 2423.8-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Ed. Free fall
Fall (idt IEC 60068-2-32.1990) instead of IEC 60068-2-32. 1975;
● measurement method GB/T 4207 solid insulating materials resistance to tracking index and comparative tracking index
(GB/T 4207-2012, IEC 60112.2009, IDT) instead of IEC 60112;
● with GB 4208 housing protection (IP Code) (GB 4208-2008, IEC 60529.2001, IDT) instead of
IEC 60529;
● with the GB/T 5023.5 rated voltage of 450/750V and below PVC insulated cables - Part 5. Flexible cables (cords
Line) (GB/T 5023.5-2008, IEC 60227-5.2003, IDT) instead of IEC 60227-5;
● with the GB/T 5169.11 Fire hazard testing for electric and electronic products - Part 11. This test method Glowing/hot wire based
Glow-wire flammability test method for the finished product (GB/T 5169.11-2006, IEC 60695-2-11.2000, IDT) instead of
IEC 60695-2-11;
● with the GB/T 5465.2-2008 Graphical symbols for electrical equipment - Part 2. Graphical symbols (IEC 60417DB.
2007, IDT) instead of the IEC 60417DB;
● based on citations, increasing the connection device GB/T 31463.2 luminaires for household and similar purposes Part 2. DCL
Standard Binder (GB/T 31463.2-2015, IEC 61995-2.2009, MOD).
--- In order to maintain consistency with other standard electrical accessories in the IEC 61995-1.2005 Chapter 1 of the third paragraph "a rated voltage of 125V
Or 250V50/60Hz. "To" the lamp connecting device rated voltage 50V or more but not exceeding 250V50 /
60Hz. ";
--- On the use of ambient temperature, taking into account the country's geographical location, natural climate actual temperature distribution, the Yangtze River to
Mean annual temperature in South Asia and the Wet Tropics Wet Tropics and the maximum temperature is higher, the larger the humidity, so this section will
IEC 61995-1.2005 Chapter 1. "Ambient temperature is usually not more than 25 ℃, but occasionally reaches 35 ℃" was changed to "ambient temperature
Usually not more than 35 ℃, but occasionally reaches 40 ℃. "
--- Taking into account China's power grid voltage level and the lamp connection means actual use of products, the IEC 61995-1.2005 Section
6 gives the voltage, current rating to modify the corresponding preferred value;
--- Moisture on the test temperature according to the ambient temperature of the concrete, this section provides moisture test temperature (40 ± 2) ℃,
IEC 61995-1. 15.2 2005 provisions for any value t ± 1K 20 ℃ ~ 30 ℃ between.
This part made the following editorial changes.
--- According to GB/T 1.1-2009 relevant provisions in Chapter 1, "scope" in paragraph 1 supplemented with "GB/T 31463 regulations of this part
Given the classification of household and similar fixtures connected devices, signs, check the size, structure, mechanical properties, electrical properties, etc.
skills requirement. ";
--- In order to express more clearly the IEC 61995-1.2005 Chapter 1 "Scope" in Paragraph 2 changes to "Note 1.
GB/T 31463.2 gives 6A plug and socket type, size. "Delete paragraph 2 of the original; original Note 1, Note 2, 3 adjustment
As Note 2, Note 3, 4;
--- According to GB/T 1.1-2009 relevant provisions of the IEC 61995-1.2005 Chapter 3 Clause 2 and 3 paragraph to read "Notes";
--- According to GB/T 1.1-2009 relevant provisions will be interspersed in the IEC 61995-1.2005 Fig moved after the text;
--- Remove the IEC 61995-1.2005 applies to other countries, some comments, such as Chapter 1 NOTE 2,7.3.1.1 injection, 10.2.2
Note 2 and the like;
--- For standard references cited in the corresponding country we have standards, using the latest national standards of China.
This part is proposed by the China Electrical Equipment Industrial Association.
This part of the National Electric annex Standardization Technical Committee (SAC/TC67) centralized.
This section drafted by. China Electric Apparatus Research Institute Co., Ltd., Hangzhou Hongyan Electric Co., Ltd., Shantou City in East Asia Electrical Factory, Beijing
Branch may be Bo Electronic Technology Co., Ltd., Ningbo Ou know Electrical Technology Co., Ltd. Ningboaike lighting, electrical flying birds
Instruments Co., Ltd, Weikai Detection Technology Co., Ltd., Huizhou Knorr Household Electrical Co., Yuehua Group Holdings Ltd., Guangzhou
Panyu Tianhong Industrial Development Co., Ltd.
The main drafters of this section. Qu Yuan, Wu Kun again, Sunquan Ming, Cai Jun, Huang Shun pro, thanks to Ke Long, Shijie Jun, Zheng Wei, Xiao Xin its high a hope,
Zeng Ruifeng, holy dynasty, Li Dajian, Shao Jing Jiang, Luo Shiming.
Connecting device for household and similar fixtures
Part 1. General requirements
1 Scope
GB/T 31463 provisions of this part of the household and similar fixtures connecting device classification, marking, dimensional inspection, structural, mechanical
Mechanical properties, electrical properties and other technical requirements.
This section applies to household and similar fixtures connecting means (DCL), and the fixed lighting electrical circuit connected to the terminal
Connected devices, the termination circuit does not exceed the rated current of 16A, and does not provide mechanical support for the lamps. Connected lighting device in accordance with
GB 4208 use in its IP rating.
Note 1. GB/T 31463.2 gives 6A plug and socket type, size.
Luminaire connection device rated voltage 50V or more but not exceeding 250V50/60Hz.
Note 2. This section does not include an integrated DCL plug (under consideration).
This section is also applicable to many types, except with standardized interfaces.
Subject to this section of the DCL plugs and sockets for use under the following conditions.
--- Ambient temperature is usually not more than 35 ℃, but occasionally reaches 40 ℃.
Note 3. The heating effect generated by the lamp may affect the ambient temperature DCL's location.
--- Containing lamps and heating effect generated by the current path, terminal temperature DCL outlet does not exceed 70 ℃.
Note 4. When assembling different interfaces or different ratings DCL test, this section also serves as a guide and test requirements.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2423.8-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Ed. Free fall (idt
IEC 60068-2-32.1990)
GB/T 2423.55-2006 Environmental testing for electric and electronic products Part 2. Test methods - Test Eh. Hammer tests
(IEC 60068-2-75.1997, IDT)
Determination of index GB/T 4207 solid insulating materials resistance to tracking index and comparative tracking (GB/T 4207-2012,
IEC 60112.2009, IDT)
GB 4208 housing protection (IP Code) (GB 4208-2008, IEC 60529.2001, IDT)
GB/T 5023.5 rated voltage of 450/750V and below PVC insulated cables Part 5. Flexible cables (cords)
(GB/T 5023.5-2008, IEC 60227-5.2003, IDT)
GB/T 5169.11 Fire hazard testing for electric and electronic products - Part 11. Glowing/hot wire based test methods for finished burning
Hot wire flammability test method (GB/T 5169.11-2006, IEC 60695-2-11.2000, IDT)
GB/T 5465.2-2008 Graphical symbols for electrical equipment - Part 2. Graphical symbols (IEC 60417DB1).2007, IDT)
GB/T 16842-2008 protective shell for inspection and test equipment used with (IEC 61032.1997, IDT)
1) refers to the IEC online database.
GB/T 31463.2 household and similar purposes - Part 2 lamps connection means. DCL with the standard sheets (GB/T 31463.2-
2015, IEC 61995-2.2009, MOD)
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 31463.1-2015_English be delivered?Answer: Upon your order, we will start to translate GB/T 31463.1-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 31463.1-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 31463.1-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|