|
US$264.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 3883.208-2023: Safety of motor-operated hand-held, transportable and garden tools - Part 208: Particular requirements for hand-held shears and nibblers
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 3883.208-2023 | English | 264 |
Add to Cart
|
3 days [Need to translate]
|
Safety of motor-operated hand-held, transportable and garden tools - Part 208: Particular requirements for hand-held shears and nibblers
| Valid |
GB/T 3883.208-2023
|
PDF similar to GB/T 3883.208-2023
Basic data | Standard ID | GB/T 3883.208-2023 (GB/T3883.208-2023) | | Description (Translated English) | Safety of motor-operated hand-held, transportable and garden tools - Part 208: Particular requirements for hand-held shears and nibblers | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K64 | | Classification of International Standard | 25.140.20 | | Word Count Estimation | 14,158 | | Date of Issue | 2023-09-07 | | Date of Implementation | 2024-04-01 | | Older Standard (superseded by this standard) | GB/T 3883.8-2012 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 3883.208-2023: Safety of motor-operated hand-held, transportable and garden tools - Part 208: Particular requirements for hand-held shears and nibblers
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 25.140.20
CCSK64
National Standards of People's Republic of China
Replace GB/T 3883.8-2012
Handheld, portable power tools and garden
Safety of Tools Part 208.
Special requirements for hand-held electric scissors and electric punching shears
(IEC 62841-2-8.2016,Electricmotor-operatedhand-heldtools,
Released on 2023-09-07 Implemented on 2024-04-01
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Table of contents
PrefaceⅠ
Introduction III
1 Scope 1
2 Normative reference documents 1
3 Terms and Definitions 1
4 General requirements 1
5 General conditions for testing 1
6 Radiation, toxicity and similar hazards1
7 Category 2
8 Logo and instructions 2
9 Protection against access to live parts2
10 Start 2
11 Input power and current 2
12 Fever 2
13 Heat resistance and flame retardancy2
14 Moisture resistance 2
15 Anti-rust 2
16 Overload protection of transformers and related circuits 3
17 Durability 3
18 Abnormal operation 3
19 Mechanical Hazards 3
20 Mechanical strength 3
21 Structure 3
22 Internal wiring 4
23 components 4
24 Power connection and external cord 4
25 Terminal 4 for external wires
26 Grounding device 4
27 Screws and connectors 4
28 Creepage distances, clearances and insulation penetration distances 4
Appendix I (informative) Measurement of noise and vibration 5
Appendix K (Normative) Battery-powered tools and battery packs 8
Reference 9
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents"
Drafting.
This document is part 208 of GB/T 3883 "Safety of hand-held and portable power tools and garden tools". GB/T 3883
---GB/T 3883.201-2017 Safety of hand-held and portable power tools and garden tools Part 2.Electric drills and impact
Specific requirements for electric drills;
---GB/T 3883.202-2019 Safety of hand-held and portable power tools and garden tools Part 202.Hand-held screwdrivers
Special requirements for wire cutters and impact wrenches;
---GB/T 3883.204-2019 Safety of hand-held and portable power tools and garden tools Part 204.Hand-held non-
Specific requirements for disc sanders and polishers;
---GB/T 3883.205-2019 Safety of hand-held and portable power tools and garden tools Part 205.Hand-held round tools
Specific requirements for saws;
Special requirements for scissors and electric punching shears;
---GB/T 3883.209-2021 Safety of hand-held and portable power tools and garden tools Part 209.Hand-held tools
Special requirements for threading machines and threading machines;
---GB/T 3883.210-2019 Safety of hand-held, portable power tools and garden tools Part 210.Hand-held power tools
Special requirements for planing;
---GB/T 3883.211-2021 Safety of hand-held and portable power tools and garden tools Part 211.Hand-held power tools
Special requirements for double sawing;
---GB/T 3883.215-2022 Safety of hand-held and portable power tools and garden tools Part 215.Hand-held stirrers
Special requirements for mixers;
---GB/T 3883.217-2023 Safety of hand-held and portable power tools and garden tools Part 217.Hand-held wooden tools
Special requirements for milling.
This document replaces GB/T 3883.8-2012 "Safety of hand-held power tools - Part 2.Special requirements for electric scissors and electric punching shears"
"Requirements", compared with GB/T 3883.8-2012, the main technical changes are as follows.
a) General conditions for testing. instructions for increasing tool mass (see Chapter 5);
b) Markings and instructions. add 8.14.2b) (see Chapter 8);
c) Abnormal operation. Modify Table 4 corresponding to Part 1 (see Chapter 18, Chapter 18 of the.2012 edition);
d) Mechanical hazards. Add modifications corresponding to Part 1 (see Chapter 19);
e) Mechanical strength. Modify the scope where 20.5 is not applicable (see Chapter 20, Chapter 20 of the.2012 edition);
f) Structure. Add 21.18.1 (see Chapter 21);
g) Add measurements of noise and vibration (informative) (see Appendix I);
h) Add the explanation that Appendix K.12.2.1 is not applicable (see Appendix K).
This document is equivalent to IEC 62841-2-8.2016 "Safety of hand-held and portable power tools and garden machines driven by electric motors".
Part 2-8.Special requirements for hand-held electric scissors and electric punching shears.
This document has made the following minimal editorial changes.
---The name of the standard is changed to "Safety of hand-held and portable power tools and garden tools - Part 208.Hand-held electric scissors and
Special requirements for electric punching shears".
Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents.
This document is proposed by the China Electrical Equipment Industry Association.
This document is under the jurisdiction of the National Power Tools Standardization Technical Committee (SAC/TC68).
This document was drafted by. Jiangsu Dongcheng Tool Technology Co., Ltd., Shanghai Electric Tool Research Institute (Group) Co., Ltd., Zhengyang Technology Co., Ltd.
Co., Ltd., Baoshide Technology (China) Co., Ltd., Zhejiang Xinyuan Electrical Manufacturing Co., Ltd., Zhejiang Ruiqi Tools Co., Ltd., Zhejiang Min
Li Electric Tools Co., Ltd., Yongkang Kaiyuan Power Tools Co., Ltd.
The main drafters of this document. Shi Chunlei, Xu Litianhao, Xu Feihao, Gu Jing, Ding Yucai, Chen Huazheng, Zhu Xianbo, Xu Feng, Lin Wenqing.
The previous versions of this document and the documents it replaces are as follows.
---First published as GB 3883.8-1985 in 1985, first revised in.1991, second revised in.2005, third revised in.2012
revision;
Introduction
This document is consistent with GB/T 3883.1-2014 "Safety of hand-held and portable power tools and garden tools - Part 1.General requirements"
use together.
The parts marked "applicable" in this document indicate that the corresponding provisions in GB/T 3883.1-2014 are applicable; the parts marked "replaced" in this document
If not, the terms in this document shall prevail; the part marked "modification" in this document indicates the relevant provisions of the corresponding provisions of GB/T 3883.1-2014
The content is subject to the revised content of this document, and other contents in this clause are still applicable; the part marked "added" in this document means that in addition to the
In addition to complying with the corresponding provisions of GB/T 3883.1-2014, it must also comply with the additional provisions of this document.
In.2014, my country issued GB/T 3883.1-2014 "Safety of hand-held and portable power tools and garden tools - Part 1.
General Requirements", the original GB/T 3883 (hand-held power tools), GB/T 13960 (portable power tools) and GB/T 4706
(Garden power tools only) The common technical requirements of the general safety standards of the three major series of power tools have been integrated.
The special requirements for specific types of small products used in conjunction with GB/T 3883.1-2014 are divided into three parts, namely Part 2 (hand
Part 3 (Hand-held power tools), Part 3 (Part movable power tools), Part 4 (Part 4 (Garden power tools)), are all converted into corresponding
Specific requirements of the IEC 62841 series.
The main element of the standard name is expanded to "Safety of hand-held, portable power tools and garden tools", and the original hand-held power tools will be used.
Part of the standard number GB/T 3883.The standard sub-part number of each sub-category of products consists of three digits, of which the first digit
Indicates the corresponding part, and the 2nd and 3rd digits indicate different small categories of products.
The new version of GB/T 3883 series standards will form a more scientific, complete, universal and unified series of safety standards for power tool products
The system makes the implementation of standards more feasible and easy to use.
At present, the new version of GB/T 3883 series standards "Handheld Power Tools Part" has released the following standards.
---GB/T 3883.201-2017 Safety of hand-held and portable power tools and garden tools Part 2.Electric drills and impact
Specific requirements for electric drills. The purpose is to standardize specific safety requirements for small categories of electric drills and impact drills.
---GB/T 3883.202-2019 Safety of hand-held and portable power tools and garden tools Part 202.Hand-held screwdrivers
Special requirements for wire cutters and impact wrenches. The purpose is to standardize the specific safety requirements for small products such as hand-held screwdrivers and impact wrenches.
All requirements.
---GB/T 3883.204-2019 Safety of hand-held and portable power tools and garden tools Part 204.Hand-held non-
Special requirements for disc sanders and polishers. The purpose is to standardize the characteristics of small products such as handheld non-disc sanders and polishers.
Set special safety requirements.
---GB/T 3883.205-2019 Safety of hand-held and portable power tools and garden tools Part 205.Hand-held round tools
Specific requirements for saws. The purpose is to standardize specific special safety requirements for small categories of hand-held circular saws.
Special requirements for scissors and electric punching shears. The purpose is to standardize the specific safety of hand-held electric scissors and small electric punching shears.
Require.
---GB/T 3883.209-2021 Safety of hand-held and portable power tools and garden tools Part 209.Hand-held tools
Special requirements for threading machines and threading machines. The purpose is to standardize the specific safety of small categories of hand-held tapping machines and threading machines.
Require.
---GB/T 3883.210-2019 Safety of hand-held, portable power tools and garden tools Part 210.Hand-held power tools
Specific requirements for planing. The purpose is to standardize specific special safety requirements for small categories of handheld electric planers.
---GB/T 3883.211-2021 Safety of hand-held and portable power tools and garden tools Part 211.Hand-held power tools
Special requirements for resawing. The purpose is to standardize specific special safety requirements for small categories of hand-held reciprocating saws.
---GB/T 3883.215-2022 Safety of hand-held and portable power tools and garden tools Part 215.Hand-held mixers
specific requirements for the device. The purpose is to standardize specific special safety requirements for small categories of hand mixers.
---GB/T 3883.217-2023 Safety of hand-held and portable power tools and garden tools Part 217.Hand-held wooden tools
Special requirements for milling. The purpose is to standardize specific special safety requirements for small categories of handheld wood milling products.
The following standards will be revised in the future.
---GB/T 3883.3-2007 Safety of hand-held power tools Part 2.Specifications for grinders, polishers and disc sanders
use requirements;
---GB/T 3883.7-2012 Safety of hand-held power tools Part 2.Special requirements for hammer tools;
---GB/T 3883.12-2012 Safety of hand-held power tools Part 2.Special requirements for concrete vibrators;
---GB/T 3883.13-1992 Safety of hand-held power tools Part 2.Special requirements for non-flammable liquid electric spray guns;
---GB/T 3883.16-2008 Safety of hand-held power tools Part 2.Special requirements for nailing machines;
---GB/T 3883.18-2009 Safety of hand-held power tools Part 2.Special requirements for stone cutting machines;
---GB/T 3883.19-2012 Safety of hand-held power tools Part 2.Special requirements for pipe dredging machines;
---GB/T 3883.20-2012 Safety of hand-held power tools Part 2.Special requirements for strapping machines;
---GB/T 3883.21-2012 Safety of hand-held power tools Part 2.Special requirements for band saws;
---GB/T 3883.22-2008 Safety of hand-held power tools Part 2.Special requirements for slotting machines.
Handheld, portable power tools and garden
Safety of Tools Part 208.
Special requirements for hand-held electric scissors and electric punching shears
1 Scope
Except for the following provisions, this chapter of GB/T 3883.1-2014 applies.
Increase.
This document applies to handheld electric scissors and electric punching shears.
2 Normative reference documents
This chapter of GB/T 3883.1-2014 applies.
3 Terms and definitions
Except for the following provisions, this chapter of GB/T 3883.1-2014 applies.
Added definition.
3.101
electric scissors shear
Tools for cutting metal sheets, metal plates and metal corrugated strips.
3.102
electric punching shear nibbler
Tools for punching metal sheets, metal plates and metal corrugated strips.
4 General requirements
This chapter of GB/T 3883.1-2014 applies.
5 General conditions for testing
Except for the following provisions, this chapter of GB/T 3883.1-2014 applies.
5.17 added.
The quality of electric scissors includes the clipper blades.
The quality of electric punching shears includes die base and punch.
6 Radiation, toxicity and similar hazards
This chapter of GB/T 3883.1-2014 applies.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 3883.208-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 3883.208-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 3883.208-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3883.208-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|